cdanesi/Ender-3V3-SE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

enabled Filament Runout Sensor

Browse Source 
this is to allow runout sensor connect to mainboard to trigger for hosts (ie Octoprint)
This commit is contained in:
rtorchia
2024-09-19 20:10:32 -04:00
committed by GitHub
parent 471e970f12
commit 42c0f93869
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+4 -4
View File
@@ -1407,14 +1407,14 @@
* RAMPS-based boards use SERVO3_PIN for the first runout sensor.
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
*/
//#define FILAMENT_RUNOUT_SENSOR
#define FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
//#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
//#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
// This is automatically enabled for MIXING_EXTRUDERs.