diff --git a/Makefile b/Makefile
deleted file mode 100644
index 5ff1830..0000000
--- a/Makefile
+++ /dev/null
@@ -1,997 +0,0 @@
-# Marlin Firmware Arduino Project Makefile
-#
-# Makefile Based on:
-# Arduino 0011 Makefile
-# Arduino adaptation by mellis, eighthave, oli.keller
-# Marlin adaption by Daid
-# Marlin 2.0 support and RELOC_WORKAROUND by @marcio-ao
-#
-# This has been tested with Arduino 0022.
-#
-# This makefile allows you to build sketches from the command line
-# without the Arduino environment (or Java).
-#
-# Detailed instructions for using the makefile:
-#
-#  1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
-#     contains the Arduino installation (for example, under macOS, this
-#     might be /Applications/Arduino.app/Contents/Resources/Java).
-#
-#  2. Modify the line containing "UPLOAD_PORT" to refer to the filename
-#     representing the USB or serial connection to your Arduino board
-#     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
-#     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
-#
-#  3. Set the line containing "MCU" to match your board's processor. Set
-#     "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
-#     following command to get a list of correspondences: `avrdude -c alf -p x`
-#     Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
-#     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
-#     change F_CPU to 8000000. If you are using Gen7 electronics, you
-#     probably need to use 20000000. Either way, you must regenerate
-#     the speed lookup table with create_speed_lookuptable.py.
-#
-#  4. Type "make" and press enter to compile/verify your program.
-#
-#  5. Type "make upload", reset your Arduino board, and press enter to
-#     upload your program to the Arduino board.
-#
-# Note that all settings at the top of this file can be overridden from
-# the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
-#
-# To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
-#
-#   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
-#
-# To compile and upload simply add "upload" to the end of the line...
-#
-#   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
-#
-# If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
-# start upload manually (using stk500) like so:
-#
-#   avrdude -C /root/arduino/hardware/tools/avr/etc/avrdude.conf -v -p m2560 -c stk500 \
-#   -U flash:w:applet/Marlin.hex:i -P /dev/ttyUSB0
-#
-# Or, try disconnecting USB to power down and then reconnecting before running avrdude.
-#
-
-# This defines the board to compile for (see boards.h for your board's ID)
-HARDWARE_MOTHERBOARD ?= 1020
-
-ifeq ($(OS),Windows_NT)
-  # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
-else
-  UNAME_S := $(shell uname -s)
-  ifeq ($(UNAME_S),Linux)
-    # Linux
-    ARDUINO_INSTALL_DIR ?= /usr/share/arduino
-    ARDUINO_USER_DIR ?= ${HOME}/Arduino
-  endif
-  ifeq ($(UNAME_S),Darwin)
-    # Darwin (macOS)
-    ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
-    ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
-    AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
-  endif
-endif
-
-# Arduino source install directory, and version number
-# On most linuxes this will be /usr/share/arduino
-ARDUINO_INSTALL_DIR  ?= ${HOME}/Arduino
-ARDUINO_VERSION      ?= 106
-
-# The installed Libraries are in the User folder
-ARDUINO_USER_DIR ?= ${HOME}/Arduino
-
-# You can optionally set a path to the avr-gcc tools.
-# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
-AVR_TOOLS_PATH ?=
-
-# Programmer configuration
-UPLOAD_RATE        ?= 57600
-AVRDUDE_PROGRAMMER ?= arduino
-# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
-UPLOAD_PORT        ?= /dev/ttyUSB0
-
-# Directory used to build files in, contains all the build files, from object
-# files to the final hex file on linux it is best to put an absolute path
-# like /home/username/tmp .
-BUILD_DIR          ?= applet
-
-# This defines whether Liquid_TWI2 support will be built
-LIQUID_TWI2        ?= 0
-
-# This defines if Wire is needed
-WIRE               ?= 0
-
-# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
-# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory.
-TONE               ?= 1
-
-# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
-U8GLIB             ?= 0
-
-# This defines whether to include the Trinamic TMCStepper library
-TMC                ?= 0
-
-# This defines whether to include the AdaFruit NeoPixel library
-NEOPIXEL           ?= 0
-
-############
-# Try to automatically determine whether RELOC_WORKAROUND is needed based
-# on GCC versions:
-#   https://www.avrfreaks.net/comment/1789106#comment-1789106
-
-CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
-CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
-CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
-CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
-ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
-  @echo This version of GCC is likely broken. Enabling relocation workaround.
-  RELOC_WORKAROUND = 1
-endif
-
-############################################################################
-# Below here nothing should be changed...
-
-# Here the Arduino variant is selected by the board type
-# HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
-# MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
-
-ifeq ($(HARDWARE_MOTHERBOARD),0)
-
-  # No motherboard selected
-
-#
-# RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
-#
-
-# MEGA/RAMPS up to 1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1000)
-
-# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1010)
-# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1011)
-# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1012)
-# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1013)
-# RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1014)
-
-# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1020)
-# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1021)
-# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1022)
-# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1023)
-# RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1024)
-
-# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1030)
-# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1031)
-# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1032)
-# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1033)
-# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1034)
-
-#
-# RAMPS Derivatives - ATmega1280, ATmega2560
-#
-
-# 3Drag Controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1100)
-# Velleman K8200 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1101)
-# Velleman K8400 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (Vertex Nano)
-else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# Velleman K8800 Controller (Vertex Delta)
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
-# 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
-# MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.4 with A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# zrib V2.0 control board (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-  MCU              ?= atmega1280
-  PROG_MCU         ?= m1280
-
-# Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Tenlog D3 Hero
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
-
-#
-# RAMBo and derivatives
-#
-
-# Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1200)
-# Mini-Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1201)
-# Mini-Rambo 1.0a
-else ifeq ($(HARDWARE_MOTHERBOARD),1202)
-# Einsy Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1203)
-# Einsy Retro
-else ifeq ($(HARDWARE_MOTHERBOARD),1204)
-# abee Scoovo X9H
-else ifeq ($(HARDWARE_MOTHERBOARD),1205)
-# Rambo ThinkerV2
-else ifeq ($(HARDWARE_MOTHERBOARD),1206)
-
-#
-# Other ATmega1280, ATmega2560
-#
-
-# Cartesio CN Controls V11
-else ifeq ($(HARDWARE_MOTHERBOARD),1300)
-# Cartesio CN Controls V12
-else ifeq ($(HARDWARE_MOTHERBOARD),1301)
-# Cartesio CN Controls V15
-else ifeq ($(HARDWARE_MOTHERBOARD),1302)
-# Cheaptronic v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1303)
-# Cheaptronic v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1304)
-# Makerbot Mightyboard Revision E
-else ifeq ($(HARDWARE_MOTHERBOARD),1305)
-# Megatronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1306)
-# Megatronics v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1307)
-# Megatronics v3.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1308)
-# Megatronics v3.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1309)
-# Megatronics v3.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1310)
-# Elefu Ra Board (v3)
-else ifeq ($(HARDWARE_MOTHERBOARD),1311)
-# Leapfrog
-else ifeq ($(HARDWARE_MOTHERBOARD),1312)
-# Mega controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1313)
-# Geeetech GT2560 Rev B for Mecreator2
-else ifeq ($(HARDWARE_MOTHERBOARD),1314)
-# Geeetech GT2560 Rev. A
-else ifeq ($(HARDWARE_MOTHERBOARD),1315)
-# Geeetech GT2560 Rev. A+ (with auto level probe)
-else ifeq ($(HARDWARE_MOTHERBOARD),1316)
-# Geeetech GT2560 Rev B for A10(M/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for A20(M/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
-# Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1320)
-
-#
-# ATmega1281, ATmega2561
-#
-
-# Minitronics v1.0/1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1400)
-  MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
-# Silvergate v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1401)
-  MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
-
-#
-# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
-#
-
-# Sanguinololu < 1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1500)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Sanguinololu 1.2 and above
-else ifeq ($(HARDWARE_MOTHERBOARD),1501)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Melzi
-else ifeq ($(HARDWARE_MOTHERBOARD),1502)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Melzi V2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1503)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Melzi with ATmega1284 (MaKr3d version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1504)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Melzi Creality3D board (for CR-10 etc)
-else ifeq ($(HARDWARE_MOTHERBOARD),1505)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Melzi Malyan M150 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1506)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Tronxy X5S
-else ifeq ($(HARDWARE_MOTHERBOARD),1507)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# STB V1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1508)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Azteeg X1
-else ifeq ($(HARDWARE_MOTHERBOARD),1509)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Anet 1.0 (Melzi clone)
-else ifeq ($(HARDWARE_MOTHERBOARD),1510)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-
-#
-# Other ATmega644P, ATmega644, ATmega1284P
-#
-
-# Gen3 Monolithic Electronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1600)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Gen3+
-else ifeq ($(HARDWARE_MOTHERBOARD),1601)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Gen6
-else ifeq ($(HARDWARE_MOTHERBOARD),1602)
-  HARDWARE_VARIANT ?= Gen6
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Gen6 deluxe
-else ifeq ($(HARDWARE_MOTHERBOARD),1603)
-  HARDWARE_VARIANT ?= Gen6
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Gen7 custom (Alfons3 Version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1604)
-  HARDWARE_VARIANT ?= Gen7
-  MCU              ?= atmega644
-  PROG_MCU         ?= m644
-  F_CPU            ?= 20000000
-# Gen7 v1.1, v1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1605)
-  HARDWARE_VARIANT ?= Gen7
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-  F_CPU            ?= 20000000
-# Gen7 v1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1606)
-  HARDWARE_VARIANT ?= Gen7
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-  F_CPU            ?= 20000000
-# Gen7 v1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1607)
-  HARDWARE_VARIANT ?= Gen7
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-  F_CPU            ?= 20000000
-# Alpha OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1608)
-  HARDWARE_VARIANT ?= SanguinoA
-  MCU              ?= atmega644
-  PROG_MCU         ?= m644
-# Final OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1609)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Sethi 3D_1
-else ifeq ($(HARDWARE_MOTHERBOARD),1610)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-
-#
-# Teensyduino - AT90USB1286, AT90USB1286P
-#
-
-# Teensylu
-else ifeq ($(HARDWARE_MOTHERBOARD),1700)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-# Printrboard (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1701)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-# Printrboard Revision F (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1702)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-# Brainwave (AT90USB646)
-else ifeq ($(HARDWARE_MOTHERBOARD),1703)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb646
-  PROG_MCU         ?= usb646
-# Brainwave Pro (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1704)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-# SAV Mk-I (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1705)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-# Teensy++2.0 (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1706)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-# 5DPrint D8 Driver Board
-else ifeq ($(HARDWARE_MOTHERBOARD),1707)
-  HARDWARE_VARIANT ?= Teensy
-  MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
-
-# UltiMachine Archim1 (with DRV8825 drivers)
-else ifeq ($(HARDWARE_MOTHERBOARD),3023)
-  HARDWARE_VARIANT ?= archim
-  MCPU              = cortex-m3
-  F_CPU             = 84000000
-  IS_MCU            = 0
-# UltiMachine Archim2 (with TMC2130 drivers)
-else ifeq ($(HARDWARE_MOTHERBOARD),3024)
-  HARDWARE_VARIANT ?= archim
-  MCPU              = cortex-m3
-  F_CPU             = 84000000
-  IS_MCU            = 0
-endif
-
-# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
-# if you are setting this to something other than 16MHz
-# Do not put the UL suffix, it's done later on.
-# Set to 16Mhz if not yet set.
-F_CPU ?= 16000000
-
-# Set to microcontroller if IS_MCU not yet set
-IS_MCU ?= 1
-
-ifeq ($(IS_MCU),1)
-  # Set to arduino, ATmega2560 if not yet set.
-  HARDWARE_VARIANT ?= arduino
-  MCU              ?= atmega2560
-  PROG_MCU         ?= m2560
-
-  TOOL_PREFIX = avr
-  MCU_FLAGS   = -mmcu=$(MCU)
-  SIZE_FLAGS  = --mcu=$(MCU) -C
-else
-  TOOL_PREFIX = arm-none-eabi
-  CPU_FLAGS   = -mthumb -mcpu=$(MCPU)
-  SIZE_FLAGS  = -A
-endif
-
-# Arduino contained the main source code for the Arduino
-# Libraries, the "hardware variant" are for boards
-# that derives from that, and their source are present in
-# the main Marlin source directory
-
-TARGET = $(notdir $(CURDIR))
-
-# VPATH tells make to look into these directory for source files,
-# there is no need to specify explicit pathnames as long as the
-# directory is added here
-
-# The Makefile for previous versions of Marlin used VPATH for all
-# source files, but for Marlin 2.0, we use VPATH only for arduino
-# library files.
-
-VPATH = .
-VPATH += $(BUILD_DIR)
-VPATH += $(HARDWARE_SRC)
-
-ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
-endif
-
-ifeq ($(IS_MCU),1)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
-
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
-endif
-
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
-
-ifeq ($(LIQUID_TWI2), 1)
-  WIRE   = 1
-  VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
-endif
-ifeq ($(WIRE), 1)
-  # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
-endif
-ifeq ($(NEOPIXEL), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
-endif
-ifeq ($(U8GLIB), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/csrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/cppsrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/fntsrc
-endif
-ifeq ($(TMC), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src/source
-endif
-
-ifeq ($(HARDWARE_VARIANT), arduino)
-  HARDWARE_SUB_VARIANT ?= mega
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
-else ifeq ($(HARDWARE_VARIANT), Sanguino)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
-else ifeq ($(HARDWARE_VARIANT), archim)
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/libsam
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/CMSIS/Include/
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/Device/ATMEL/
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/avr
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/USB
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/Wire/src
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/SPI/src
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/U8glib/src/clib
-  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim
-  LDSCRIPT = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/linker_scripts/gcc/flash.ld
-  LDLIBS   = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
-else
-  HARDWARE_SUB_VARIANT ?= standard
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
-endif
-
-LIB_SRC = wiring.c \
-  wiring_analog.c wiring_digital.c \
-  wiring_shift.c WInterrupts.c hooks.c
-
-ifeq ($(HARDWARE_VARIANT), archim)
-  LIB_ASRC += wiring_pulse_asm.S
-else
-  LIB_SRC += wiring_pulse.c
-endif
-
-ifeq ($(HARDWARE_VARIANT), Teensy)
-  LIB_SRC = wiring.c
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
-endif
-
-LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp
-
-ifeq ($(NEOPIXEL), 1)
-  LIB_CXXSRC += Adafruit_NeoPixel.cpp
-endif
-
-ifeq ($(LIQUID_TWI2), 0)
-  LIB_CXXSRC += LiquidCrystal.cpp
-else
-  LIB_SRC += twi.c
-  LIB_CXXSRC += Wire.cpp LiquidTWI2.cpp
-endif
-
-ifeq ($(WIRE), 1)
-  LIB_SRC += twi.c
-  LIB_CXXSRC += Wire.cpp
-endif
-
-ifeq ($(TONE), 1)
-  LIB_CXXSRC += Tone.cpp
-endif
-
-ifeq ($(U8GLIB), 1)
-  LIB_CXXSRC += U8glib.cpp
-  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
-    u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
-    u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
-endif
-
-ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
-    CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
-    DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
-    SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
-    TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
-endif
-
-ifeq ($(RELOC_WORKAROUND), 1)
-  LD_PREFIX=-nodefaultlibs
-  LD_SUFFIX=-lm -lgcc -lc -lgcc
-endif
-
-#Check for Arduino 1.0.0 or higher and use the correct source files for that version
-ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
-  LIB_CXXSRC += main.cpp
-else
-  LIB_SRC += pins_arduino.c main.c
-endif
-
-FORMAT = ihex
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-DEBUG = stabs
-
-OPT = s
-
-DEFINES ?=
-
-# Program settings
-CC = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-gcc
-CXX = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-g++
-OBJCOPY = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-objcopy
-OBJDUMP = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-objdump
-AR  = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-ar
-SIZE = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-size
-NM = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
-CXXDEFS  = $(CDEFS)
-
-ifeq ($(HARDWARE_VARIANT), Teensy)
-  CDEFS      += -DUSB_SERIAL
-  LIB_SRC    += usb.c pins_teensy.c
-  LIB_CXXSRC += usb_api.cpp
-
-else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
-  CDEFS      += -DUSB_VID=0x27B1 -DUSB_PID=0x0001 -DUSBCON
-  CDEFS      += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
-
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
-    UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
-    PluggableUSB.cpp USBCore.cpp
-
-  LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
-
-  ifeq ($(U8GLIB), 1)
-    LIB_SRC += u8g_com_api.c u8g_pb32h1.c
-  endif
-endif
-
-# Add all the source directories as include directories too
-CINCS = ${addprefix -I ,${VPATH}}
-CXXINCS = ${addprefix -I ,${VPATH}}
-
-# Silence warnings for library code (won't work for .h files, unfortunately)
-LIBWARN = -w -Wno-packed-bitfield-compat
-
-# Compiler flag to set the C/CPP Standard level.
-CSTANDARD = -std=gnu99
-CXXSTANDARD = -std=gnu++11
-CDEBUG = -g$(DEBUG)
-CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
-          -fshort-enums -ffunction-sections -fdata-sections
-ifneq ($(HARDWARE_MOTHERBOARD),)
-  CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
-endif
-
-#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
-CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
-CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
-ASFLAGS :=          $(CDEFS)
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-
-ifeq ($(HARDWARE_VARIANT), archim)
-  LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
-  LD_SUFFIX = $(LDLIBS)
-
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
-  LDFLAGS  += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
-else
-  LD_PREFIX = -Wl,--gc-sections,--relax
-  LDFLAGS   = -lm
-  CTUNING   += -flto
-endif
-
-# Programming support using avrdude. Settings and variables.
-AVRDUDE_PORT = $(UPLOAD_PORT)
-AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
-ifeq ($(shell uname -s), Linux)
-  AVRDUDE_CONF = /etc/avrdude/avrdude.conf
-else
-  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
-endif
-AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-  -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
-  -b$(UPLOAD_RATE)
-
-# Since Marlin 2.0, the source files may be distributed into several
-# different directories, so it is necessary to find them recursively
-
-SRC    = $(shell find src -name '*.c'   -type f)
-CXXSRC = $(shell find src -name '*.cpp' -type f)
-
-# Define all object files.
-OBJ  = ${patsubst %.c,   $(BUILD_DIR)/arduino/%.o, ${LIB_SRC}}
-OBJ += ${patsubst %.cpp, $(BUILD_DIR)/arduino/%.o, ${LIB_CXXSRC}}
-OBJ += ${patsubst %.S,   $(BUILD_DIR)/arduino/%.o, ${LIB_ASRC}}
-OBJ += ${patsubst %.c,   $(BUILD_DIR)/%.o, ${SRC}}
-OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
-
-# Define all listing files.
-LST = $(LIB_ASRC:.S=.lst) $(LIB_CXXSRC:.cpp=.lst) $(LIB_SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS   = $(MCU_FLAGS) $(CPU_FLAGS) $(CFLAGS) -I.
-ALL_CXXFLAGS = $(MCU_FLAGS) $(CPU_FLAGS) $(CXXFLAGS)
-ALL_ASFLAGS  = $(MCU_FLAGS) $(CPU_FLAGS) $(ASFLAGS) -x assembler-with-cpp
-
-# set V=1 (eg, "make V=1") to print the full commands etc.
-ifneq ($V,1)
-  Pecho=@echo
-  P=@
-else
-  Pecho=@:
-  P=
-endif
-
-# Create required build hierarchy if it does not exist
-
-$(shell mkdir -p $(dir $(OBJ)))
-
-# Default target.
-all: sizeafter
-
-build: elf hex bin
-
-elf: $(BUILD_DIR)/$(TARGET).elf
-bin: $(BUILD_DIR)/$(TARGET).bin
-hex: $(BUILD_DIR)/$(TARGET).hex
-eep: $(BUILD_DIR)/$(TARGET).eep
-lss: $(BUILD_DIR)/$(TARGET).lss
-sym: $(BUILD_DIR)/$(TARGET).sym
-
-# Program the device.
-# Do not try to reset an Arduino if it's not one
-upload: $(BUILD_DIR)/$(TARGET).hex
-ifeq (${AVRDUDE_PROGRAMMER}, arduino)
-	stty hup < $(UPLOAD_PORT); true
-endif
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
-ifeq (${AVRDUDE_PROGRAMMER}, arduino)
-	stty -hup < $(UPLOAD_PORT); true
-endif
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
-ELFSIZE = $(SIZE)  $(SIZE_FLAGS) $(BUILD_DIR)/$(TARGET).elf; \
-          $(SIZE)  $(BUILD_DIR)/$(TARGET).elf
-sizebefore:
-	$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
-
-sizeafter: build
-	$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
-  --change-section-address .data-0x800000 \
-  --change-section-address .bss-0x800000 \
-  --change-section-address .noinit-0x800000 \
-  --change-section-address .eeprom-0x810000
-
-
-coff: $(BUILD_DIR)/$(TARGET).elf
-	$(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
-	$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym .bin
-.PRECIOUS: .o
-
-.elf.hex:
-	$(Pecho) "  COPY  $@"
-	$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.bin:
-	$(Pecho) "  COPY  $@"
-	$P $(OBJCOPY) -O binary -R .eeprom $< $@
-
-.elf.eep:
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	  --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
-	$(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
-	$(NM) -n $< > $@
-
-# Link: create ELF output file from library.
-
-$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
-	$(Pecho) "  CXX   $@"
-	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
-
-# Object files that were found in "src" will be stored in $(BUILD_DIR)
-# in directories that mirror the structure of "src"
-
-$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CC    $<"
-	$P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@
-
-$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@
-
-# Object files for Arduino libs will be created in $(BUILD_DIR)/arduino
-
-$(BUILD_DIR)/arduino/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CC    $<"
-	$P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@
-
-$(BUILD_DIR)/arduino/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_CXXFLAGS)  $(LIBWARN) $< -o $@
-
-$(BUILD_DIR)/arduino/%.o: %.S $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@
-
-# Target: clean project.
-clean:
-	$(Pecho) "  RMDIR $(BUILD_DIR)/"
-	$P rm -rf $(BUILD_DIR)
-
-
-.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
-
-# Automatically include the dependency files created by gcc
--include ${patsubst %.o, %.d, ${OBJ}}