cdanesi/Ender-3V3-SE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

First commit for Ender-3V3 SE

Browse Source 
First commit for Ender-3V3 SE
This commit is contained in:
CrealityTech
2024-07-10 13:47:44 +08:00
commit e7b2bad8ff
1869 changed files with 1519784 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/src/HAL/AVR/HAL.cpp
+94
View File
@@ -0,0 +1,94 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __AVR__
#include "../../inc/MarlinConfig.h"
#include "HAL.h"
#ifdef USBCON
DefaultSerial1 MSerial0(false, Serial);
#ifdef BLUETOOTH
BTSerial btSerial(false, bluetoothSerial);
#endif
#endif
// ------------------------
// Public Variables
// ------------------------
//uint8_t MCUSR;
// ------------------------
// Public functions
// ------------------------
void HAL_init() {
// Init Servo Pins
#define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
#if HAS_SERVO_0
INIT_SERVO(0);
#endif
#if HAS_SERVO_1
INIT_SERVO(1);
#endif
#if HAS_SERVO_2
INIT_SERVO(2);
#endif
#if HAS_SERVO_3
INIT_SERVO(3);
#endif
}
void HAL_reboot() {
#if ENABLED(USE_WATCHDOG)
while (1) { /* run out the watchdog */ }
#else
void (*resetFunc)() = 0; // Declare resetFunc() at address 0
resetFunc(); // Jump to address 0
#endif
}
#if ENABLED(SDSUPPORT)
#include "../../sd/SdFatUtil.h"
int freeMemory() { return SdFatUtil::FreeRam(); }
#else // !SDSUPPORT
extern "C" {
extern char __bss_end;
extern char __heap_start;
extern void* __brkval;
int freeMemory() {
int free_memory;
if ((int)__brkval == 0)
free_memory = ((int)&free_memory) - ((int)&__bss_end);
else
free_memory = ((int)&free_memory) - ((int)__brkval);
return free_memory;
}
}
#endif // !SDSUPPORT
#endif // __AVR__
Marlin/src/HAL/AVR/HAL.h
+217
View File
@@ -0,0 +1,217 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../shared/Marduino.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include "math.h"
#ifdef USBCON
#include <HardwareSerial.h>
#else
#define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
#include "MarlinSerial.h"
#endif
#include <stdint.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include <avr/io.h>
#ifndef pgm_read_ptr
// Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
// Windows Subsystem for Linux on Windows 10 as of 10/18/2019
#define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long))
#define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
#define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
#endif
// ------------------------
// Defines
// ------------------------
// AVR PROGMEM extension for sprintf_P
#define S_FMT "%S"
// AVR PROGMEM extension for string define
#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
#ifndef CRITICAL_SECTION_START
#define CRITICAL_SECTION_START() unsigned char _sreg = SREG; cli()
#define CRITICAL_SECTION_END() SREG = _sreg
#endif
#define ISRS_ENABLED() TEST(SREG, SREG_I)
#define ENABLE_ISRS() sei()
#define DISABLE_ISRS() cli()
// ------------------------
// Types
// ------------------------
typedef int8_t pin_t;
#define SHARED_SERVOS HAS_SERVOS
#define HAL_SERVO_LIB Servo
// ------------------------
// Public Variables
// ------------------------
//extern uint8_t MCUSR;
// Serial ports
#ifdef USBCON
#include "../../core/serial_hook.h"
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#ifdef BLUETOOTH
typedef ForwardSerial1Class< decltype(bluetoothSerial) > BTSerial;
extern BTSerial btSerial;
#endif
#define MYSERIAL1 TERN(BLUETOOTH, btSerial, MSerial0)
#else
#if !WITHIN(SERIAL_PORT, -1, 3)
#error "SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
#endif
#define MYSERIAL1 customizedSerial1
#ifdef SERIAL_PORT_2
#if !WITHIN(SERIAL_PORT_2, -1, 3)
#error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
#endif
#define MYSERIAL2 customizedSerial2
#endif
#ifdef SERIAL_PORT_3
#if !WITHIN(SERIAL_PORT_3, -1, 3)
#error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
#endif
#define MYSERIAL3 customizedSerial3
#endif
#endif
#ifdef MMU2_SERIAL_PORT
#if !WITHIN(MMU2_SERIAL_PORT, -1, 3)
#error "MMU2_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
#endif
#define MMU2_SERIAL mmuSerial
#endif
#ifdef LCD_SERIAL_PORT
#if !WITHIN(LCD_SERIAL_PORT, -1, 3)
#error "LCD_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
#endif
#define LCD_SERIAL lcdSerial
#if HAS_DGUS_LCD
#define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
#endif
#endif
// ------------------------
// Public functions
// ------------------------
void HAL_init();
//void cli();
//void _delay_ms(const int delay);
inline void HAL_clear_reset_source() { MCUSR = 0; }
inline uint8_t HAL_get_reset_source() { return MCUSR; }
void HAL_reboot();
#if GCC_VERSION <= 50000
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
extern "C" int freeMemory();
#if GCC_VERSION <= 50000
#pragma GCC diagnostic pop
#endif
// ADC
#ifdef DIDR2
#define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
#else
#define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
#endif
inline void HAL_adc_init() {
ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
DIDR0 = 0;
#ifdef DIDR2
DIDR2 = 0;
#endif
}
#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
#ifdef MUX5
#define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
#else
#define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
#endif
#define HAL_ADC_VREF 5.0
#define HAL_ADC_RESOLUTION 10
#define HAL_READ_ADC() ADC
#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
#define HAL_SENSITIVE_PINS 0, 1
#ifdef __AVR_AT90USB1286__
#define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
#endif
// AVR compatibility
#define strtof strtod
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
/**
* set_pwm_frequency
* Sets the frequency of the timer corresponding to the provided pin
* as close as possible to the provided desired frequency. Internally
* calculates the required waveform generation mode, prescaler and
* resolution values required and sets the timer registers accordingly.
* NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
* NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
*/
void set_pwm_frequency(const pin_t pin, int f_desired);
/**
* set_pwm_duty
* Sets the PWM duty cycle of the provided pin to the provided value
* Optionally allows inverting the duty cycle [default = false]
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
*/
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
Marlin/src/HAL/AVR/HAL_SPI.cpp
+253
View File
@@ -0,0 +1,253 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Adapted from Arduino Sd2Card Library
* Copyright (c) 2009 by William Greiman
*/
/**
* HAL for AVR - SPI functions
*/
#ifdef __AVR__
#include "../../inc/MarlinConfig.h"
void spiBegin() {
OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);
#if DISABLED(SOFTWARE_SPI)
// SS must be in output mode even it is not chip select
//SET_OUTPUT(SD_SS_PIN);
// set SS high - may be chip select for another SPI device
//#if SET_SPI_SS_HIGH
//WRITE(SD_SS_PIN, HIGH);
//#endif
// set a default rate
spiInit(1);
#endif
}
#if NONE(SOFTWARE_SPI, FORCE_SOFT_SPI)
// ------------------------
// Hardware SPI
// ------------------------
// make sure SPCR rate is in expected bits
#if (SPR0 != 0 || SPR1 != 1)
#error "unexpected SPCR bits"
#endif
/**
* Initialize hardware SPI
* Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6]
*/
void spiInit(uint8_t spiRate) {
// See avr processor documentation
CBI(
#ifdef PRR
PRR
#elif defined(PRR0)
PRR0
#endif
, PRSPI);
SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);
}
/** SPI receive a byte */
uint8_t spiRec() {
SPDR = 0xFF;
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
return SPDR;
}
/** SPI read data */
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte-- == 0) return;
SPDR = 0xFF;
for (uint16_t i = 0; i < nbyte; i++) {
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
buf[i] = SPDR;
SPDR = 0xFF;
}
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
buf[nbyte] = SPDR;
}
/** SPI send a byte */
void spiSend(uint8_t b) {
SPDR = b;
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
/** SPI send block */
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
SPDR = buf[i];
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
SPDR = buf[i + 1];
}
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
/** begin spi transaction */
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// Based on Arduino SPI library
// Clock settings are defined as follows. Note that this shows SPI2X
// inverted, so the bits form increasing numbers. Also note that
// fosc/64 appears twice
// SPR1 SPR0 ~SPI2X Freq
// 0 0 0 fosc/2
// 0 0 1 fosc/4
// 0 1 0 fosc/8
// 0 1 1 fosc/16
// 1 0 0 fosc/32
// 1 0 1 fosc/64
// 1 1 0 fosc/64
// 1 1 1 fosc/128
// We find the fastest clock that is less than or equal to the
// given clock rate. The clock divider that results in clock_setting
// is 2 ^^ (clock_div + 1). If nothing is slow enough, we'll use the
// slowest (128 == 2 ^^ 7, so clock_div = 6).
uint8_t clockDiv;
// When the clock is known at compiletime, use this if-then-else
// cascade, which the compiler knows how to completely optimize
// away. When clock is not known, use a loop instead, which generates
// shorter code.
if (__builtin_constant_p(spiClock)) {
if (spiClock >= F_CPU / 2) clockDiv = 0;
else if (spiClock >= F_CPU / 4) clockDiv = 1;
else if (spiClock >= F_CPU / 8) clockDiv = 2;
else if (spiClock >= F_CPU / 16) clockDiv = 3;
else if (spiClock >= F_CPU / 32) clockDiv = 4;
else if (spiClock >= F_CPU / 64) clockDiv = 5;
else clockDiv = 6;
}
else {
uint32_t clockSetting = F_CPU / 2;
clockDiv = 0;
while (clockDiv < 6 && spiClock < clockSetting) {
clockSetting /= 2;
clockDiv++;
}
}
// Compensate for the duplicate fosc/64
if (clockDiv == 6) clockDiv = 7;
// Invert the SPI2X bit
clockDiv ^= 0x1;
SPCR = _BV(SPE) | _BV(MSTR) | ((bitOrder == LSBFIRST) ? _BV(DORD) : 0) |
(dataMode << CPHA) | ((clockDiv >> 1) << SPR0);
SPSR = clockDiv | 0x01;
}
#else // SOFTWARE_SPI || FORCE_SOFT_SPI
// ------------------------
// Software SPI
// ------------------------
// nop to tune soft SPI timing
#define nop asm volatile ("\tnop\n")
void spiInit(uint8_t) { /* do nothing */ }
// Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { /* do nothing */ }
// Soft SPI receive byte
uint8_t spiRec() {
uint8_t data = 0;
// no interrupts during byte receive - about 8µs
cli();
// output pin high - like sending 0xFF
WRITE(SD_MOSI_PIN, HIGH);
LOOP_L_N(i, 8) {
WRITE(SD_SCK_PIN, HIGH);
nop; // adjust so SCK is nice
nop;
data <<= 1;
if (READ(SD_MISO_PIN)) data |= 1;
WRITE(SD_SCK_PIN, LOW);
}
sei();
return data;
}
// Soft SPI read data
void spiRead(uint8_t *buf, uint16_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
buf[i] = spiRec();
}
// Soft SPI send byte
void spiSend(uint8_t data) {
// no interrupts during byte send - about 8µs
cli();
LOOP_L_N(i, 8) {
WRITE(SD_SCK_PIN, LOW);
WRITE(SD_MOSI_PIN, data & 0x80);
data <<= 1;
WRITE(SD_SCK_PIN, HIGH);
}
nop; // hold SCK high for a few ns
nop;
nop;
nop;
WRITE(SD_SCK_PIN, LOW);
sei();
}
// Soft SPI send block
void spiSendBlock(uint8_t token, const uint8_t *buf) {
spiSend(token);
for (uint16_t i = 0; i < 512; i++)
spiSend(buf[i]);
}
#endif // SOFTWARE_SPI || FORCE_SOFT_SPI
#endif // __AVR__
Marlin/src/HAL/AVR/MarlinSerial.cpp
+652
View File
@@ -0,0 +1,652 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* MarlinSerial.cpp - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* Modified 23 November 2006 by David A. Mellis
* Modified 28 September 2010 by Mark Sproul
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
* Modified 10 June 2018 by Eduardo José Tagle (See #10991)
* Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
*/
#ifdef __AVR__
// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
#include "../../inc/MarlinConfig.h"
#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
#include "MarlinSerial.h"
#include "../../MarlinCore.h"
#if ENABLED(DIRECT_STEPPING)
#include "../../feature/direct_stepping.h"
#endif
template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
template<typename Cfg> bool MarlinSerial<Cfg>::_written = false;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::xon_xoff_state = MarlinSerial<Cfg>::XON_XOFF_CHAR_SENT | MarlinSerial<Cfg>::XON_CHAR;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::rx_dropped_bytes = 0;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::rx_buffer_overruns = 0;
template<typename Cfg> uint8_t MarlinSerial<Cfg>::rx_framing_errors = 0;
template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::rx_max_enqueued = 0;
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() asm volatile("": : :"memory");
#include "../../feature/e_parser.h"
// "Atomically" read the RX head index value without disabling interrupts:
// This MUST be called with RX interrupts enabled, and CAN'T be called
// from the RX ISR itself!
template<typename Cfg>
FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_head() {
if (Cfg::RX_SIZE > 256) {
// Keep reading until 2 consecutive reads return the same value,
// meaning there was no update in-between caused by an interrupt.
// This works because serial RX interrupts happen at a slower rate
// than successive reads of a variable, so 2 consecutive reads with
// the same value means no interrupt updated it.
ring_buffer_pos_t vold, vnew = rx_buffer.head;
sw_barrier();
do {
vold = vnew;
vnew = rx_buffer.head;
sw_barrier();
} while (vold != vnew);
return vnew;
}
else {
// With an 8bit index, reads are always atomic. No need for special handling
return rx_buffer.head;
}
}
template<typename Cfg>
volatile bool MarlinSerial<Cfg>::rx_tail_value_not_stable = false;
template<typename Cfg>
volatile uint16_t MarlinSerial<Cfg>::rx_tail_value_backup = 0;
// Set RX tail index, taking into account the RX ISR could interrupt
// the write to this variable in the middle - So a backup strategy
// is used to ensure reads of the correct values.
// -Must NOT be called from the RX ISR -
template<typename Cfg>
FORCE_INLINE void MarlinSerial<Cfg>::atomic_set_rx_tail(typename MarlinSerial<Cfg>::ring_buffer_pos_t value) {
if (Cfg::RX_SIZE > 256) {
// Store the new value in the backup
rx_tail_value_backup = value;
sw_barrier();
// Flag we are about to change the true value
rx_tail_value_not_stable = true;
sw_barrier();
// Store the new value
rx_buffer.tail = value;
sw_barrier();
// Signal the new value is completely stored into the value
rx_tail_value_not_stable = false;
sw_barrier();
}
else
rx_buffer.tail = value;
}
// Get the RX tail index, taking into account the read could be
// interrupting in the middle of the update of that index value
// -Called from the RX ISR -
template<typename Cfg>
FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_tail() {
if (Cfg::RX_SIZE > 256) {
// If the true index is being modified, return the backup value
if (rx_tail_value_not_stable) return rx_tail_value_backup;
}
// The true index is stable, return it
return rx_buffer.tail;
}
// (called with RX interrupts disabled)
template<typename Cfg>
FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
static EmergencyParser::State emergency_state; // = EP_RESET
// This must read the R_UCSRA register before reading the received byte to detect error causes
if (Cfg::DROPPED_RX && B_DOR && !++rx_dropped_bytes) --rx_dropped_bytes;
if (Cfg::RX_OVERRUNS && B_DOR && !++rx_buffer_overruns) --rx_buffer_overruns;
if (Cfg::RX_FRAMING_ERRORS && B_FE && !++rx_framing_errors) --rx_framing_errors;
// Read the character from the USART
uint8_t c = R_UDR;
#if ENABLED(DIRECT_STEPPING)
if (page_manager.maybe_store_rxd_char(c)) return;
#endif
// Get the tail - Nothing can alter its value while this ISR is executing, but there's
// a chance that this ISR interrupted the main process while it was updating the index.
// The backup mechanism ensures the correct value is always returned.
const ring_buffer_pos_t t = atomic_read_rx_tail();
// Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
ring_buffer_pos_t h = rx_buffer.head;
// Get the next element
ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the RX FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
--rx_dropped_bytes;
if (Cfg::MAX_RX_QUEUED) {
// Calculate count of bytes stored into the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// Keep track of the maximum count of enqueued bytes
NOLESS(rx_max_enqueued, rx_count);
}
if (Cfg::XONOFF) {
// If the last char that was sent was an XON
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
// Bytes stored into the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// If over 12.5% of RX buffer capacity, send XOFF before running out of
// RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
// and stop sending bytes. This translates to 13mS propagation time.
if (rx_count >= (Cfg::RX_SIZE) / 8) {
// At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
// Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
// to be in the middle of trying to disable the RX interrupt in the main program, eventually the
// enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
// the sending of the XOFF char is to send it HERE AND NOW.
// About to send the XOFF char
xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
// Wait until the TX register becomes empty and send it - Here there could be a problem
// - While waiting for the TX register to empty, the RX register could receive a new
// character. This must also handle that situation!
while (!B_UDRE) {
if (B_RXC) {
// A char arrived while waiting for the TX buffer to be empty - Receive and process it!
i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// Read the character from the USART
c = R_UDR;
if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
--rx_dropped_bytes;
}
sw_barrier();
}
R_UDR = XOFF_CHAR;
// Clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
B_TXC = 1;
// At this point there could be a race condition between the write() function
// and this sending of the XOFF char. This interrupt could happen between the
// wait to be empty TX buffer loop and the actual write of the character. Since
// the TX buffer is full because it's sending the XOFF char, the only way to be
// sure the write() function will succeed is to wait for the XOFF char to be
// completely sent. Since an extra character could be received during the wait
// it must also be handled!
while (!B_UDRE) {
if (B_RXC) {
// A char arrived while waiting for the TX buffer to be empty - Receive and process it!
i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
// Read the character from the USART
c = R_UDR;
if (Cfg::EMERGENCYPARSER)
emergency_parser.update(emergency_state, c);
// If the character is to be stored at the index just before the tail
// (such that the head would advance to the current tail), the FIFO is
// full, so don't write the character or advance the head.
if (i != t) {
rx_buffer.buffer[h] = c;
h = i;
}
else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
--rx_dropped_bytes;
}
sw_barrier();
}
// At this point everything is ready. The write() function won't
// have any issues writing to the UART TX register if it needs to!
}
}
}
// Store the new head value - The main loop will retry until the value is stable
rx_buffer.head = h;
}
// (called with TX irqs disabled)
template<typename Cfg>
FORCE_INLINE void MarlinSerial<Cfg>::_tx_udr_empty_irq() {
if (Cfg::TX_SIZE > 0) {
// Read positions
uint8_t t = tx_buffer.tail;
const uint8_t h = tx_buffer.head;
if (Cfg::XONOFF) {
// If an XON char is pending to be sent, do it now
if (xon_xoff_state == XON_CHAR) {
// Send the character
R_UDR = XON_CHAR;
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
B_TXC = 1;
// Remember we sent it.
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
// If nothing else to transmit, just disable TX interrupts.
if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
return;
}
}
// If nothing to transmit, just disable TX interrupts. This could
// happen as the result of the non atomicity of the disabling of RX
// interrupts that could end reenabling TX interrupts as a side effect.
if (h == t) {
B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
return;
}
// There is something to TX, Send the next byte
const uint8_t c = tx_buffer.buffer[t];
t = (t + 1) & (Cfg::TX_SIZE - 1);
R_UDR = c;
tx_buffer.tail = t;
// Clear the TXC bit (by writing a one to its bit location).
// Ensures flush() won't return until the bytes are actually written/
B_TXC = 1;
// Disable interrupts if there is nothing to transmit following this byte
if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
}
}
// Public Methods
template<typename Cfg>
void MarlinSerial<Cfg>::begin(const long baud) {
uint16_t baud_setting;
bool useU2X = true;
#if F_CPU == 16000000UL && SERIAL_PORT == 0
// Hard-coded exception for compatibility with the bootloader shipped
// with the Duemilanove and previous boards, and the firmware on the
// 8U2 on the Uno and Mega 2560.
if (baud == 57600) useU2X = false;
#endif
R_UCSRA = 0;
if (useU2X) {
B_U2X = 1;
baud_setting = (F_CPU / 4 / baud - 1) / 2;
}
else
baud_setting = (F_CPU / 8 / baud - 1) / 2;
// assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
R_UBRRH = baud_setting >> 8;
R_UBRRL = baud_setting;
B_RXEN = 1;
B_TXEN = 1;
B_RXCIE = 1;
if (Cfg::TX_SIZE > 0) B_UDRIE = 0;
_written = false;
}
template<typename Cfg>
void MarlinSerial<Cfg>::end() {
B_RXEN = 0;
B_TXEN = 0;
B_RXCIE = 0;
B_UDRIE = 0;
}
template<typename Cfg>
int MarlinSerial<Cfg>::peek() {
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return h == t ? -1 : rx_buffer.buffer[t];
}
template<typename Cfg>
int MarlinSerial<Cfg>::read() {
const ring_buffer_pos_t h = atomic_read_rx_head();
// Read the tail. Main thread owns it, so it is safe to directly read it
ring_buffer_pos_t t = rx_buffer.tail;
// If nothing to read, return now
if (h == t) return -1;
// Get the next char
const int v = rx_buffer.buffer[t];
t = (ring_buffer_pos_t)(t + 1) & (Cfg::RX_SIZE - 1);
// Advance tail - Making sure the RX ISR will always get an stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(t);
if (Cfg::XONOFF) {
// If the XOFF char was sent, or about to be sent...
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
// Get count of bytes in the RX buffer
const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
if (rx_count < (Cfg::RX_SIZE) / 10) {
if (Cfg::TX_SIZE > 0) {
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX ISR. Non atomic, but it will eventually enable them
B_UDRIE = 1;
}
else {
// If not using TX interrupts, we must send the XON char now
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
while (!B_UDRE) sw_barrier();
R_UDR = XON_CHAR;
}
}
}
}
return v;
}
template<typename Cfg>
typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available() {
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
}
template<typename Cfg>
void MarlinSerial<Cfg>::flush() {
// Set the tail to the head:
// - Read the RX head index in a safe way. (See atomic_read_rx_head.)
// - Set the tail, making sure the RX ISR will always get a stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(atomic_read_rx_head());
if (Cfg::XONOFF) {
// If the XOFF char was sent, or about to be sent...
if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
if (Cfg::TX_SIZE > 0) {
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX ISR. Non atomic, but it will eventually enable it.
B_UDRIE = 1;
}
else {
// If not using TX interrupts, we must send the XON char now
xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
while (!B_UDRE) sw_barrier();
R_UDR = XON_CHAR;
}
}
}
}
template<typename Cfg>
void MarlinSerial<Cfg>::write(const uint8_t c) {
if (Cfg::TX_SIZE == 0) {
_written = true;
while (!B_UDRE) sw_barrier();
R_UDR = c;
}
else {
_written = true;
// If the TX interrupts are disabled and the data register
// is empty, just write the byte to the data register and
// be done. This shortcut helps significantly improve the
// effective datarate at high (>500kbit/s) bitrates, where
// interrupt overhead becomes a slowdown.
// Yes, there is a race condition between the sending of the
// XOFF char at the RX ISR, but it is properly handled there
if (!B_UDRIE && B_UDRE) {
R_UDR = c;
// clear the TXC bit -- "can be cleared by writing a one to its bit
// location". This makes sure flush() won't return until the bytes
// actually got written
B_TXC = 1;
return;
}
const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
// Make room by polling if it is possible to transmit, and do so!
while (i == tx_buffer.tail) {
// If we can transmit another byte, do it.
if (B_UDRE) _tx_udr_empty_irq();
// Make sure compiler rereads tx_buffer.tail
sw_barrier();
}
}
else {
// Interrupts are enabled, just wait until there is space
while (i == tx_buffer.tail) sw_barrier();
}
// Store new char. head is always safe to move
tx_buffer.buffer[tx_buffer.head] = c;
tx_buffer.head = i;
// Enable TX ISR - Non atomic, but it will eventually enable TX ISR
B_UDRIE = 1;
}
}
template<typename Cfg>
void MarlinSerial<Cfg>::flushTX() {
if (Cfg::TX_SIZE == 0) {
// No bytes written, no need to flush. This special case is needed since there's
// no way to force the TXC (transmit complete) bit to 1 during initialization.
if (!_written) return;
// Wait until everything was transmitted
while (!B_TXC) sw_barrier();
// At this point nothing is queued anymore (DRIE is disabled) and
// the hardware finished transmission (TXC is set).
}
else {
// No bytes written, no need to flush. This special case is needed since there's
// no way to force the TXC (transmit complete) bit to 1 during initialization.
if (!_written) return;
// If global interrupts are disabled (as the result of being called from an ISR)...
if (!ISRS_ENABLED()) {
// Wait until everything was transmitted - We must do polling, as interrupts are disabled
while (tx_buffer.head != tx_buffer.tail || !B_TXC) {
// If there is more space, send an extra character
if (B_UDRE) _tx_udr_empty_irq();
sw_barrier();
}
}
else {
// Wait until everything was transmitted
while (tx_buffer.head != tx_buffer.tail || !B_TXC) sw_barrier();
}
// At this point nothing is queued anymore (DRIE is disabled) and
// the hardware finished transmission (TXC is set).
}
}
// Hookup ISR handlers
ISR(SERIAL_REGNAME(USART, SERIAL_PORT, _RX_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART, SERIAL_PORT, _UDRE_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Because of the template definition above, it's required to instantiate the template to have all methods generated
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
#ifdef SERIAL_PORT_2
// Hookup ISR handlers
ISR(SERIAL_REGNAME(USART, SERIAL_PORT_2, _RX_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART, SERIAL_PORT_2, _UDRE_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::_tx_udr_empty_irq();
}
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> >;
MSerialT2 customizedSerial2(MSerialT2::HasEmergencyParser);
#endif // SERIAL_PORT_2
#ifdef SERIAL_PORT_3
// Hookup ISR handlers
ISR(SERIAL_REGNAME(USART, SERIAL_PORT_3, _RX_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_3>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART, SERIAL_PORT_3, _UDRE_vect)) {
MarlinSerial<MarlinSerialCfg<SERIAL_PORT_3>>::_tx_udr_empty_irq();
}
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> >;
MSerialT3 customizedSerial3(MSerialT3::HasEmergencyParser);
#endif // SERIAL_PORT_3
#ifdef MMU2_SERIAL_PORT
ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
}
template class MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> >;
MSerialMMU2 mmuSerial(MSerialMMU2::HasEmergencyParser);
#endif // MMU2_SERIAL_PORT
#ifdef LCD_SERIAL_PORT
ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _RX_vect)) {
MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _UDRE_vect)) {
MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::_tx_udr_empty_irq();
}
template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);
#if HAS_DGUS_LCD
template<typename Cfg>
typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
const ring_buffer_pos_t t = tx_buffer.tail, // next byte to send.
h = tx_buffer.head; // next pos for queue.
int ret = t - h - 1;
if (ret < 0) ret += Cfg::TX_SIZE + 1;
return ret;
}
#endif
#endif // LCD_SERIAL_PORT
#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
// For AT90USB targets use the UART for BT interfacing
#if defined(USBCON) && ENABLED(BLUETOOTH)
MSerialBT bluetoothSerial(false);
#endif
#endif // __AVR__
Marlin/src/HAL/AVR/MarlinSerial.h
+297
View File
@@ -0,0 +1,297 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MarlinSerial.h - Hardware serial library for Wiring
* Copyright (c) 2006 Nicholas Zambetti. All right reserved.
*
* Modified 28 September 2010 by Mark Sproul
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
* Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
*/
#include <WString.h>
#include "../../inc/MarlinConfigPre.h"
#include "../../core/serial_hook.h"
#ifndef SERIAL_PORT
#define SERIAL_PORT 0
#endif
#ifndef USBCON
// The presence of the UBRRH register is used to detect a UART.
#define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \
(port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
(port == 3 && defined(UBRR3H)))
// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
// requires two levels of indirection to expand macro values properly)
#define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
#define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
#else
#define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
#endif
// Registers used by MarlinSerial class (expanded depending on selected serial port)
// Templated 8bit register (generic)
#define UART_REGISTER_DECL_BASE(registerbase, suffix) \
template<int portNr> struct R_##registerbase##x##suffix {}
// Templated 8bit register (specialization for each port)
#define UART_REGISTER_DECL(port, registerbase, suffix) \
template<> struct R_##registerbase##x##suffix<port> { \
constexpr R_##registerbase##x##suffix(int) {} \
FORCE_INLINE void operator=(uint8_t newVal) const { SERIAL_REGNAME(registerbase,port,suffix) = newVal; } \
FORCE_INLINE operator uint8_t() const { return SERIAL_REGNAME(registerbase,port,suffix); } \
}
// Templated 1bit register (generic)
#define UART_BIT_DECL_BASE(registerbase, suffix, bit) \
template<int portNr>struct B_##bit##x {}
// Templated 1bit register (specialization for each port)
#define UART_BIT_DECL(port, registerbase, suffix, bit) \
template<> struct B_##bit##x<port> { \
constexpr B_##bit##x(int) {} \
FORCE_INLINE void operator=(int newVal) const { \
if (newVal) \
SBI(SERIAL_REGNAME(registerbase,port,suffix),SERIAL_REGNAME(bit,port,)); \
else \
CBI(SERIAL_REGNAME(registerbase,port,suffix),SERIAL_REGNAME(bit,port,)); \
} \
FORCE_INLINE operator bool() const { return TEST(SERIAL_REGNAME(registerbase,port,suffix),SERIAL_REGNAME(bit,port,)); } \
}
#define UART_DECL_BASE() \
UART_REGISTER_DECL_BASE(UCSR,A);\
UART_REGISTER_DECL_BASE(UDR,);\
UART_REGISTER_DECL_BASE(UBRR,H);\
UART_REGISTER_DECL_BASE(UBRR,L);\
UART_BIT_DECL_BASE(UCSR,B,RXEN);\
UART_BIT_DECL_BASE(UCSR,B,TXEN);\
UART_BIT_DECL_BASE(UCSR,A,TXC);\
UART_BIT_DECL_BASE(UCSR,B,RXCIE);\
UART_BIT_DECL_BASE(UCSR,A,UDRE);\
UART_BIT_DECL_BASE(UCSR,A,FE);\
UART_BIT_DECL_BASE(UCSR,A,DOR);\
UART_BIT_DECL_BASE(UCSR,B,UDRIE);\
UART_BIT_DECL_BASE(UCSR,A,RXC);\
UART_BIT_DECL_BASE(UCSR,A,U2X)
#define UART_DECL(port) \
UART_REGISTER_DECL(port,UCSR,A);\
UART_REGISTER_DECL(port,UDR,);\
UART_REGISTER_DECL(port,UBRR,H);\
UART_REGISTER_DECL(port,UBRR,L);\
UART_BIT_DECL(port,UCSR,B,RXEN);\
UART_BIT_DECL(port,UCSR,B,TXEN);\
UART_BIT_DECL(port,UCSR,A,TXC);\
UART_BIT_DECL(port,UCSR,B,RXCIE);\
UART_BIT_DECL(port,UCSR,A,UDRE);\
UART_BIT_DECL(port,UCSR,A,FE);\
UART_BIT_DECL(port,UCSR,A,DOR);\
UART_BIT_DECL(port,UCSR,B,UDRIE);\
UART_BIT_DECL(port,UCSR,A,RXC);\
UART_BIT_DECL(port,UCSR,A,U2X)
// Declare empty templates
UART_DECL_BASE();
// And all the specializations for each possible serial port
#if UART_PRESENT(0)
UART_DECL(0);
#endif
#if UART_PRESENT(1)
UART_DECL(1);
#endif
#if UART_PRESENT(2)
UART_DECL(2);
#endif
#if UART_PRESENT(3)
UART_DECL(3);
#endif
#define BYTE 0
// Templated type selector
template<bool b, typename T, typename F> struct TypeSelector { typedef T type;} ;
template<typename T, typename F> struct TypeSelector<false, T, F> { typedef F type; };
template<typename Cfg>
class MarlinSerial {
protected:
// Registers
static constexpr R_UCSRxA<Cfg::PORT> R_UCSRA = 0;
static constexpr R_UDRx<Cfg::PORT> R_UDR = 0;
static constexpr R_UBRRxH<Cfg::PORT> R_UBRRH = 0;
static constexpr R_UBRRxL<Cfg::PORT> R_UBRRL = 0;
// Bits
static constexpr B_RXENx<Cfg::PORT> B_RXEN = 0;
static constexpr B_TXENx<Cfg::PORT> B_TXEN = 0;
static constexpr B_TXCx<Cfg::PORT> B_TXC = 0;
static constexpr B_RXCIEx<Cfg::PORT> B_RXCIE = 0;
static constexpr B_UDREx<Cfg::PORT> B_UDRE = 0;
static constexpr B_FEx<Cfg::PORT> B_FE = 0;
static constexpr B_DORx<Cfg::PORT> B_DOR = 0;
static constexpr B_UDRIEx<Cfg::PORT> B_UDRIE = 0;
static constexpr B_RXCx<Cfg::PORT> B_RXC = 0;
static constexpr B_U2Xx<Cfg::PORT> B_U2X = 0;
// Base size of type on buffer size
typedef typename TypeSelector<(Cfg::RX_SIZE>256), uint16_t, uint8_t>::type ring_buffer_pos_t;
struct ring_buffer_r {
volatile ring_buffer_pos_t head, tail;
unsigned char buffer[Cfg::RX_SIZE];
};
struct ring_buffer_t {
volatile uint8_t head, tail;
unsigned char buffer[Cfg::TX_SIZE];
};
static ring_buffer_r rx_buffer;
static ring_buffer_t tx_buffer;
static bool _written;
static constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80, // XON / XOFF Character was sent
XON_XOFF_CHAR_MASK = 0x1F; // XON / XOFF character to send
// XON / XOFF character definitions
static constexpr uint8_t XON_CHAR = 17, XOFF_CHAR = 19;
static uint8_t xon_xoff_state,
rx_dropped_bytes,
rx_buffer_overruns,
rx_framing_errors;
static ring_buffer_pos_t rx_max_enqueued;
static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head();
static volatile bool rx_tail_value_not_stable;
static volatile uint16_t rx_tail_value_backup;
static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value);
static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail();
public:
FORCE_INLINE static void store_rxd_char();
FORCE_INLINE static void _tx_udr_empty_irq();
public:
static void begin(const long);
static void end();
static int peek();
static int read();
static void flush();
static ring_buffer_pos_t available();
static void write(const uint8_t c);
static void flushTX();
#if HAS_DGUS_LCD
static ring_buffer_pos_t get_tx_buffer_free();
#endif
enum { HasEmergencyParser = Cfg::EMERGENCYPARSER };
static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
};
template <uint8_t serial>
struct MarlinSerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = TX_BUFFER_SIZE;
static constexpr bool XONOFF = ENABLED(SERIAL_XON_XOFF);
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = ENABLED(SERIAL_STATS_DROPPED_RX);
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
extern MSerialT1 customizedSerial1;
#ifdef SERIAL_PORT_2
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
extern MSerialT2 customizedSerial2;
#endif
#ifdef SERIAL_PORT_3
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
extern MSerialT3 customizedSerial3;
#endif
#endif // !USBCON
#ifdef MMU2_SERIAL_PORT
template <uint8_t serial>
struct MMU2SerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = 32;
static constexpr unsigned int TX_SIZE = 32;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
static constexpr bool RX_OVERRUNS = false;
};
typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
extern MSerialMMU2 mmuSerial;
#endif
#ifdef LCD_SERIAL_PORT
template <uint8_t serial>
struct LCDSerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = TERN(HAS_DGUS_LCD, DGUS_RX_BUFFER_SIZE, 64);
static constexpr unsigned int TX_SIZE = TERN(HAS_DGUS_LCD, DGUS_TX_BUFFER_SIZE, 128);
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
static constexpr bool RX_OVERRUNS = BOTH(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
};
typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;
extern MSerialLCD lcdSerial;
#endif
// Use the UART for Bluetooth in AT90USB configurations
#if defined(USBCON) && ENABLED(BLUETOOTH)
typedef Serial1Class<HardwareSerial> MSerialBT;
extern MSerialBT bluetoothSerial;
#endif
Marlin/src/HAL/AVR/Servo.cpp
+216
View File
@@ -0,0 +1,216 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*/
/**
* A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
* The servos are pulsed in the background using the value most recently written using the write() method
*
* Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
* Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
*
* The methods are:
*
* Servo - Class for manipulating servo motors connected to Arduino pins.
*
* attach(pin) - Attach a servo motor to an i/o pin.
* attach(pin, min, max) - Attach to a pin, setting min and max values in microseconds
* Default min is 544, max is 2400
*
* write() - Set the servo angle in degrees. (Invalid angles —over MIN_PULSE_WIDTH— are treated as µs.)
* writeMicroseconds() - Set the servo pulse width in microseconds.
* move(pin, angle) - Sequence of attach(pin), write(angle), safe_delay(servo_delay[servoIndex]).
* With DEACTIVATE_SERVOS_AFTER_MOVE it detaches after servo_delay[servoIndex].
* read() - Get the last-written servo pulse width as an angle between 0 and 180.
* readMicroseconds() - Get the last-written servo pulse width in microseconds.
* attached() - Return true if a servo is attached.
* detach() - Stop an attached servo from pulsing its i/o pin.
*/
#ifdef __AVR__
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include <avr/interrupt.h>
#include "../shared/servo.h"
#include "../shared/servo_private.h"
static volatile int8_t Channel[_Nbr_16timers]; // counter for the servo being pulsed for each timer (or -1 if refresh interval)
/************ static functions common to all instances ***********************/
static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {
if (Channel[timer] < 0)
*TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
else {
if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && SERVO(timer, Channel[timer]).Pin.isActive)
extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated
}
Channel[timer]++; // increment to the next channel
if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
*OCRnA = *TCNTn + SERVO(timer, Channel[timer]).ticks;
if (SERVO(timer, Channel[timer]).Pin.isActive) // check if activated
extDigitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // it's an active channel so pulse it high
}
else {
// finished all channels so wait for the refresh period to expire before starting over
if (((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL)) // allow a few ticks to ensure the next OCR1A not missed
*OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL);
else
*OCRnA = *TCNTn + 4; // at least REFRESH_INTERVAL has elapsed
Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
}
}
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
// Interrupt handlers for Arduino
#ifdef _useTimer1
SIGNAL(TIMER1_COMPA_vect) { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif
#ifdef _useTimer3
SIGNAL(TIMER3_COMPA_vect) { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif
#ifdef _useTimer4
SIGNAL(TIMER4_COMPA_vect) { handle_interrupts(_timer4, &TCNT4, &OCR4A); }
#endif
#ifdef _useTimer5
SIGNAL(TIMER5_COMPA_vect) { handle_interrupts(_timer5, &TCNT5, &OCR5A); }
#endif
#else // WIRING
// Interrupt handlers for Wiring
#ifdef _useTimer1
void Timer1Service() { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif
#ifdef _useTimer3
void Timer3Service() { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif
#endif // WIRING
/****************** end of static functions ******************************/
void initISR(timer16_Sequence_t timer) {
#ifdef _useTimer1
if (timer == _timer1) {
TCCR1A = 0; // normal counting mode
TCCR1B = _BV(CS11); // set prescaler of 8
TCNT1 = 0; // clear the timer count
#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__)
SBI(TIFR, OCF1A); // clear any pending interrupts;
SBI(TIMSK, OCIE1A); // enable the output compare interrupt
#else
// here if not ATmega8 or ATmega128
SBI(TIFR1, OCF1A); // clear any pending interrupts;
SBI(TIMSK1, OCIE1A); // enable the output compare interrupt
#endif
#ifdef WIRING
timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service);
#endif
}
#endif
#ifdef _useTimer3
if (timer == _timer3) {
TCCR3A = 0; // normal counting mode
TCCR3B = _BV(CS31); // set prescaler of 8
TCNT3 = 0; // clear the timer count
#ifdef __AVR_ATmega128__
SBI(TIFR, OCF3A); // clear any pending interrupts;
SBI(ETIMSK, OCIE3A); // enable the output compare interrupt
#else
SBI(TIFR3, OCF3A); // clear any pending interrupts;
SBI(TIMSK3, OCIE3A); // enable the output compare interrupt
#endif
#ifdef WIRING
timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
#endif
}
#endif
#ifdef _useTimer4
if (timer == _timer4) {
TCCR4A = 0; // normal counting mode
TCCR4B = _BV(CS41); // set prescaler of 8
TCNT4 = 0; // clear the timer count
TIFR4 = _BV(OCF4A); // clear any pending interrupts;
TIMSK4 = _BV(OCIE4A); // enable the output compare interrupt
}
#endif
#ifdef _useTimer5
if (timer == _timer5) {
TCCR5A = 0; // normal counting mode
TCCR5B = _BV(CS51); // set prescaler of 8
TCNT5 = 0; // clear the timer count
TIFR5 = _BV(OCF5A); // clear any pending interrupts;
TIMSK5 = _BV(OCIE5A); // enable the output compare interrupt
}
#endif
}
void finISR(timer16_Sequence_t timer) {
// Disable use of the given timer
#ifdef WIRING
if (timer == _timer1) {
CBI(
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK1
#else
TIMSK
#endif
, OCIE1A); // disable timer 1 output compare interrupt
timerDetach(TIMER1OUTCOMPAREA_INT);
}
else if (timer == _timer3) {
CBI(
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK3
#else
ETIMSK
#endif
, OCIE3A); // disable the timer3 output compare A interrupt
timerDetach(TIMER3OUTCOMPAREA_INT);
}
#else // !WIRING
// For arduino - in future: call here to a currently undefined function to reset the timer
UNUSED(timer);
#endif
}
#endif // HAS_SERVOS
#endif // __AVR__
Marlin/src/HAL/AVR/ServoTimers.h
+93
View File
@@ -0,0 +1,93 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* ServoTimers.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
* Copyright (c) 2009 Michael Margolis. All right reserved.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
* Defines for 16 bit timers used with Servo library
*
* If _useTimerX is defined then TimerX is a 16 bit timer on the current board
* timer16_Sequence_t enumerates the sequence that the timers should be allocated
* _Nbr_16timers indicates how many 16 bit timers are available.
*/
/**
* AVR Only definitions
* --------------------
*/
#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays
#define SERVO_TIMER_PRESCALER 8 // timer prescaler
// Say which 16 bit timers can be used and in what order
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
//#define _useTimer1
#define _useTimer4
#if NUM_SERVOS > SERVOS_PER_TIMER
#define _useTimer3
#if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
#define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
#endif
#endif
#elif defined(__AVR_ATmega32U4__)
#define _useTimer3
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
#define _useTimer3
#elif defined(__AVR_ATmega128__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega2561__)
#define _useTimer3
#else
// everything else
#endif
typedef enum {
#ifdef _useTimer1
_timer1,
#endif
#ifdef _useTimer3
_timer3,
#endif
#ifdef _useTimer4
_timer4,
#endif
#ifdef _useTimer5
_timer5,
#endif
_Nbr_16timers
} timer16_Sequence_t;
Marlin/src/HAL/AVR/eeprom.cpp
+74
View File
@@ -0,0 +1,74 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __AVR__
#include "../../inc/MarlinConfig.h"
#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
/**
* PersistentStore for Arduino-style EEPROM interface
* with implementations supplied by the framework.
*/
#include "../shared/eeprom_api.h"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE size_t(E2END + 1)
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
uint8_t c = eeprom_read_byte((uint8_t*)pos);
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false; // always assume success for AVR's
}
#endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
#endif // __AVR__
Marlin/src/HAL/AVR/endstop_interrupts.h
+261
View File
@@ -0,0 +1,261 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the temperature-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate either an
* 'external interrupt' or a 'pin change interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#include "../../module/endstops.h"
#include <stdint.h>
// One ISR for all EXT-Interrupts
void endstop_ISR() { endstops.update(); }
/**
* Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
*
* These macros for the Arduino MEGA do not include the two connected pins on Port J (D14, D15).
* So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
* There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
*/
#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
#define digitalPinHasPCICR(p) (WITHIN(p, 10, 15) || WITHIN(p, 50, 53) || WITHIN(p, 62, 69))
#undef digitalPinToPCICR
#define digitalPinToPCICR(p) (digitalPinHasPCICR(p) ? (&PCICR) : nullptr)
#undef digitalPinToPCICRbit
#define digitalPinToPCICRbit(p) (WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
WITHIN(p, 14, 15) ? 1 : \
WITHIN(p, 62, 69) ? 2 : \
0)
#undef digitalPinToPCMSK
#define digitalPinToPCMSK(p) (WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? (&PCMSK0) : \
WITHIN(p, 14, 15) ? (&PCMSK1) : \
WITHIN(p, 62, 69) ? (&PCMSK2) : \
nullptr)
#undef digitalPinToPCMSKbit
#define digitalPinToPCMSKbit(p) (WITHIN(p, 10, 13) ? ((p) - 6) : \
(p) == 14 || (p) == 51 ? 2 : \
(p) == 15 || (p) == 52 ? 1 : \
(p) == 50 ? 3 : \
(p) == 53 ? 0 : \
WITHIN(p, 62, 69) ? ((p) - 62) : \
0)
#elif defined(__AVR_ATmega164A__) || defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324A__) || \
defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega324PB__) || \
defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || \
defined(__AVR_ATmega1284P__)
#define digitalPinHasPCICR(p) WITHIN(p, 0, NUM_DIGITAL_PINS)
#else
#error "Unsupported AVR variant!"
#endif
// Install Pin change interrupt for a pin. Can be called multiple times.
void pciSetup(const int8_t pin) {
if (digitalPinHasPCICR(pin)) {
SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin)); // enable pin
SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
}
}
// Handlers for pin change interrupts
#ifdef PCINT0_vect
ISR(PCINT0_vect) { endstop_ISR(); }
#endif
#ifdef PCINT1_vect
ISR(PCINT1_vect, ISR_ALIASOF(PCINT0_vect));
#endif
#ifdef PCINT2_vect
ISR(PCINT2_vect, ISR_ALIASOF(PCINT0_vect));
#endif
#ifdef PCINT3_vect
ISR(PCINT3_vect, ISR_ALIASOF(PCINT0_vect));
#endif
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(X_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(X_MAX_PIN);
#endif
#endif
#if HAS_X_MIN
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(X_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(X_MIN_PIN);
#endif
#endif
#if HAS_Y_MAX
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Y_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Y_MAX_PIN);
#endif
#endif
#if HAS_Y_MIN
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Y_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Y_MIN_PIN);
#endif
#endif
#if HAS_Z_MAX
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z_MAX_PIN);
#endif
#endif
#if HAS_Z_MIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z_MIN_PIN);
#endif
#endif
#if HAS_X2_MAX
#if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(X2_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(X2_MAX_PIN);
#endif
#endif
#if HAS_X2_MIN
#if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(X2_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(X2_MIN_PIN);
#endif
#endif
#if HAS_Y2_MAX
#if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Y2_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Y2_MAX_PIN);
#endif
#endif
#if HAS_Y2_MIN
#if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Y2_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Y2_MIN_PIN);
#endif
#endif
#if HAS_Z2_MAX
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z2_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z2_MAX_PIN);
#endif
#endif
#if HAS_Z2_MIN
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z2_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z2_MIN_PIN);
#endif
#endif
#if HAS_Z3_MAX
#if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z3_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z3_MAX_PIN);
#endif
#endif
#if HAS_Z3_MIN
#if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z3_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z3_MIN_PIN);
#endif
#endif
#if HAS_Z4_MAX
#if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z4_MAX_PIN);
#else
static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z4_MAX_PIN);
#endif
#endif
#if HAS_Z4_MIN
#if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z4_MIN_PIN);
#else
static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z4_MIN_PIN);
#endif
#endif
#if HAS_Z_MIN_PROBE_PIN
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
_ATTACH(Z_MIN_PROBE_PIN);
#else
static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
pciSetup(Z_MIN_PROBE_PIN);
#endif
#endif
// If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
}
Marlin/src/HAL/AVR/fast_pwm.cpp
+282
View File
@@ -0,0 +1,282 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __AVR__
#include "../../inc/MarlinConfigPre.h"
#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM
#include "HAL.h"
struct Timer {
volatile uint8_t* TCCRnQ[3]; // max 3 TCCR registers per timer
volatile uint16_t* OCRnQ[3]; // max 3 OCR registers per timer
volatile uint16_t* ICRn; // max 1 ICR register per timer
uint8_t n; // the timer number [0->5]
uint8_t q; // the timer output [0->2] (A->C)
};
/**
* get_pwm_timer
* Get the timer information and register of the provided pin.
* Return a Timer struct containing this information.
* Used by set_pwm_frequency, set_pwm_duty
*/
Timer get_pwm_timer(const pin_t pin) {
uint8_t q = 0;
switch (digitalPinToTimer(pin)) {
// Protect reserved timers (TIMER0 & TIMER1)
#ifdef TCCR0A
#if !AVR_AT90USB1286_FAMILY
case TIMER0A:
#endif
case TIMER0B:
#endif
#ifdef TCCR1A
case TIMER1A: case TIMER1B:
#endif
break;
#if defined(TCCR2) || defined(TCCR2A)
#ifdef TCCR2
case TIMER2: {
Timer timer = {
/*TCCRnQ*/ { &TCCR2, nullptr, nullptr },
/*OCRnQ*/ { (uint16_t*)&OCR2, nullptr, nullptr },
/*ICRn*/ nullptr,
/*n, q*/ 2, 0
};
}
#elif defined(TCCR2A)
#if ENABLED(USE_OCR2A_AS_TOP)
case TIMER2A: break; // protect TIMER2A
case TIMER2B: {
Timer timer = {
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr },
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr },
/*ICRn*/ nullptr,
/*n, q*/ 2, 1
};
return timer;
}
#else
case TIMER2B: ++q;
case TIMER2A: {
Timer timer = {
/*TCCRnQ*/ { &TCCR2A, &TCCR2B, nullptr },
/*OCRnQ*/ { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr },
/*ICRn*/ nullptr,
2, q
};
return timer;
}
#endif
#endif
#endif
#ifdef OCR3C
case TIMER3C: ++q;
case TIMER3B: ++q;
case TIMER3A: {
Timer timer = {
/*TCCRnQ*/ { &TCCR3A, &TCCR3B, &TCCR3C },
/*OCRnQ*/ { &OCR3A, &OCR3B, &OCR3C },
/*ICRn*/ &ICR3,
/*n, q*/ 3, q
};
return timer;
}
#elif defined(OCR3B)
case TIMER3B: ++q;
case TIMER3A: {
Timer timer = {
/*TCCRnQ*/ { &TCCR3A, &TCCR3B, nullptr },
/*OCRnQ*/ { &OCR3A, &OCR3B, nullptr },
/*ICRn*/ &ICR3,
/*n, q*/ 3, q
};
return timer;
}
#endif
#ifdef TCCR4A
case TIMER4C: ++q;
case TIMER4B: ++q;
case TIMER4A: {
Timer timer = {
/*TCCRnQ*/ { &TCCR4A, &TCCR4B, &TCCR4C },
/*OCRnQ*/ { &OCR4A, &OCR4B, &OCR4C },
/*ICRn*/ &ICR4,
/*n, q*/ 4, q
};
return timer;
}
#endif
#ifdef TCCR5A
case TIMER5C: ++q;
case TIMER5B: ++q;
case TIMER5A: {
Timer timer = {
/*TCCRnQ*/ { &TCCR5A, &TCCR5B, &TCCR5C },
/*OCRnQ*/ { &OCR5A, &OCR5B, &OCR5C },
/*ICRn*/ &ICR5,
/*n, q*/ 5, q
};
return timer;
}
#endif
}
Timer timer = {
/*TCCRnQ*/ { nullptr, nullptr, nullptr },
/*OCRnQ*/ { nullptr, nullptr, nullptr },
/*ICRn*/ nullptr,
0, 0
};
return timer;
}
void set_pwm_frequency(const pin_t pin, int f_desired) {
Timer timer = get_pwm_timer(pin);
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
uint16_t size;
if (timer.n == 2) size = 255; else size = 65535;
uint16_t res = 255; // resolution (TOP value)
uint8_t j = 0; // prescaler index
uint8_t wgm = 1; // waveform generation mode
// Calculating the prescaler and resolution to use to achieve closest frequency
if (f_desired != 0) {
int f = (F_CPU) / (2 * 1024 * size) + 1; // Initialize frequency as lowest (non-zero) achievable
uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
// loop over prescaler values
LOOP_S_L_N(i, 1, 8) {
uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
if (timer.n == 2) {
// No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
#if ENABLED(USE_OCR2A_AS_TOP)
const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
res_temp_fast = rtf - 1;
res_temp_phase_correct = rtf / 2;
#endif
}
else {
// Skip TIMER2 specific prescalers when not TIMER2
if (i == 3 || i == 5) continue;
const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
res_temp_fast = rtf - 1;
res_temp_phase_correct = rtf / 2;
}
LIMIT(res_temp_fast, 1U, size);
LIMIT(res_temp_phase_correct, 1U, size);
// Calculate frequencies of test prescaler and resolution values
const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
f_diff = ABS(f - f_desired),
f_fast_diff = ABS(f_temp_fast - f_desired),
f_phase_diff = ABS(f_temp_phase_correct - f_desired);
// If FAST values are closest to desired f
if (f_fast_diff < f_diff && f_fast_diff <= f_phase_diff) {
// Remember this combination
f = f_temp_fast;
res = res_temp_fast;
j = i;
// Set the Wave Generation Mode to FAST PWM
if (timer.n == 2) {
wgm = (
#if ENABLED(USE_OCR2A_AS_TOP)
WGM2_FAST_PWM_OCR2A
#else
WGM2_FAST_PWM
#endif
);
}
else wgm = WGM_FAST_PWM_ICRn;
}
// If PHASE CORRECT values are closes to desired f
else if (f_phase_diff < f_diff) {
f = f_temp_phase_correct;
res = res_temp_phase_correct;
j = i;
// Set the Wave Generation Mode to PWM PHASE CORRECT
if (timer.n == 2) {
wgm = (
#if ENABLED(USE_OCR2A_AS_TOP)
WGM2_PWM_PC_OCR2A
#else
WGM2_PWM_PC
#endif
);
}
else wgm = WGM_PWM_PC_ICRn;
}
}
}
_SET_WGMnQ(timer.TCCRnQ, wgm);
_SET_CSn(timer.TCCRnQ, j);
if (timer.n == 2) {
#if ENABLED(USE_OCR2A_AS_TOP)
_SET_OCRnQ(timer.OCRnQ, 0, res); // Set OCR2A value (TOP) = res
#endif
}
else
_SET_ICRn(timer.ICRn, res); // Set ICRn value (TOP) = res
}
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
// If v is 0 or v_size (max), digitalWrite to LOW or HIGH.
// Note that digitalWrite also disables pwm output for us (sets COM bit to 0)
if (v == 0)
digitalWrite(pin, invert);
else if (v == v_size)
digitalWrite(pin, !invert);
else {
Timer timer = get_pwm_timer(pin);
if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
// Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted)
_SET_COMnQ(timer.TCCRnQ, (timer.q
#ifdef TCCR2
+ (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro
#endif
), COM_CLEAR_SET + invert
);
uint16_t top;
if (timer.n == 2) { // if TIMER2
top = (
#if ENABLED(USE_OCR2A_AS_TOP)
*timer.OCRnQ[0] // top = OCR2A
#else
255 // top = 0xFF (max)
#endif
);
}
else
top = *timer.ICRn; // top = ICRn
_SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top) / float(v_size)); // Scale 8/16-bit v to top value
}
}
#endif // NEEDS_HARDWARE_PWM
#endif // __AVR__
Marlin/src/HAL/AVR/fastio.cpp
+288
View File
@@ -0,0 +1,288 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Fast I/O for extended pins
*/
#ifdef __AVR__
#include "fastio.h"
#ifdef FASTIO_EXT_START
#include "../shared/Marduino.h"
#define _IS_EXT(P) WITHIN(P, FASTIO_EXT_START, FASTIO_EXT_END)
void extDigitalWrite(const int8_t pin, const uint8_t state) {
#define _WCASE(N) case N: WRITE(N, state); break
switch (pin) {
default: digitalWrite(pin, state);
#if _IS_EXT(70)
_WCASE(70);
#endif
#if _IS_EXT(71)
_WCASE(71);
#endif
#if _IS_EXT(72)
_WCASE(72);
#endif
#if _IS_EXT(73)
_WCASE(73);
#endif
#if _IS_EXT(74)
_WCASE(74);
#endif
#if _IS_EXT(75)
_WCASE(75);
#endif
#if _IS_EXT(76)
_WCASE(76);
#endif
#if _IS_EXT(77)
_WCASE(77);
#endif
#if _IS_EXT(78)
_WCASE(78);
#endif
#if _IS_EXT(79)
_WCASE(79);
#endif
#if _IS_EXT(80)
_WCASE(80);
#endif
#if _IS_EXT(81)
_WCASE(81);
#endif
#if _IS_EXT(82)
_WCASE(82);
#endif
#if _IS_EXT(83)
_WCASE(83);
#endif
#if _IS_EXT(84)
_WCASE(84);
#endif
#if _IS_EXT(85)
_WCASE(85);
#endif
#if _IS_EXT(86)
_WCASE(86);
#endif
#if _IS_EXT(87)
_WCASE(87);
#endif
#if _IS_EXT(88)
_WCASE(88);
#endif
#if _IS_EXT(89)
_WCASE(89);
#endif
#if _IS_EXT(90)
_WCASE(90);
#endif
#if _IS_EXT(91)
_WCASE(91);
#endif
#if _IS_EXT(92)
_WCASE(92);
#endif
#if _IS_EXT(93)
_WCASE(93);
#endif
#if _IS_EXT(94)
_WCASE(94);
#endif
#if _IS_EXT(95)
_WCASE(95);
#endif
#if _IS_EXT(96)
_WCASE(96);
#endif
#if _IS_EXT(97)
_WCASE(97);
#endif
#if _IS_EXT(98)
_WCASE(98);
#endif
#if _IS_EXT(99)
_WCASE(99);
#endif
#if _IS_EXT(100)
_WCASE(100);
#endif
}
}
uint8_t extDigitalRead(const int8_t pin) {
#define _RCASE(N) case N: return READ(N)
switch (pin) {
default: return digitalRead(pin);
#if _IS_EXT(70)
_RCASE(70);
#endif
#if _IS_EXT(71)
_RCASE(71);
#endif
#if _IS_EXT(72)
_RCASE(72);
#endif
#if _IS_EXT(73)
_RCASE(73);
#endif
#if _IS_EXT(74)
_RCASE(74);
#endif
#if _IS_EXT(75)
_RCASE(75);
#endif
#if _IS_EXT(76)
_RCASE(76);
#endif
#if _IS_EXT(77)
_RCASE(77);
#endif
#if _IS_EXT(78)
_RCASE(78);
#endif
#if _IS_EXT(79)
_RCASE(79);
#endif
#if _IS_EXT(80)
_RCASE(80);
#endif
#if _IS_EXT(81)
_RCASE(81);
#endif
#if _IS_EXT(82)
_RCASE(82);
#endif
#if _IS_EXT(83)
_RCASE(83);
#endif
#if _IS_EXT(84)
_RCASE(84);
#endif
#if _IS_EXT(85)
_RCASE(85);
#endif
#if _IS_EXT(86)
_RCASE(86);
#endif
#if _IS_EXT(87)
_RCASE(87);
#endif
#if _IS_EXT(88)
_RCASE(88);
#endif
#if _IS_EXT(89)
_RCASE(89);
#endif
#if _IS_EXT(90)
_RCASE(90);
#endif
#if _IS_EXT(91)
_RCASE(91);
#endif
#if _IS_EXT(92)
_RCASE(92);
#endif
#if _IS_EXT(93)
_RCASE(93);
#endif
#if _IS_EXT(94)
_RCASE(94);
#endif
#if _IS_EXT(95)
_RCASE(95);
#endif
#if _IS_EXT(96)
_RCASE(96);
#endif
#if _IS_EXT(97)
_RCASE(97);
#endif
#if _IS_EXT(98)
_RCASE(98);
#endif
#if _IS_EXT(99)
_RCASE(99);
#endif
#if _IS_EXT(100)
_RCASE(100);
#endif
}
}
#if 0
/**
* Set Timer 5 PWM frequency in Hz, from 3.8Hz up to ~16MHz
* with a minimum resolution of 100 steps.
*
* DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
*/
uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb, const float dcc) {
float count = 0;
if (hz > 0 && (dca || dcb || dcc)) {
count = float(F_CPU) / hz; // 1x prescaler, TOP for 16MHz base freq.
uint16_t prescaler; // Range of 30.5Hz (65535) 64.5KHz (>31)
if (count >= 255. * 256.) { prescaler = 1024; SET_CS(5, PRESCALER_1024); }
else if (count >= 255. * 64.) { prescaler = 256; SET_CS(5, PRESCALER_256); }
else if (count >= 255. * 8.) { prescaler = 64; SET_CS(5, PRESCALER_64); }
else if (count >= 255.) { prescaler = 8; SET_CS(5, PRESCALER_8); }
else { prescaler = 1; SET_CS(5, PRESCALER_1); }
count /= float(prescaler);
const float pwm_top = round(count); // Get the rounded count
ICR5 = (uint16_t)pwm_top - 1; // Subtract 1 for TOP
OCR5A = pwm_top * ABS(dca); // Update and scale DCs
OCR5B = pwm_top * ABS(dcb);
OCR5C = pwm_top * ABS(dcc);
_SET_COM(5, A, dca ? (dca < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL); // Set compare modes
_SET_COM(5, B, dcb ? (dcb < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
_SET_COM(5, C, dcc ? (dcc < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
SET_WGM(5, FAST_PWM_ICRn); // Fast PWM with ICR5 as TOP
//SERIAL_ECHOLNPGM("Timer 5 Settings:");
//SERIAL_ECHOLNPAIR(" Prescaler=", prescaler);
//SERIAL_ECHOLNPAIR(" TOP=", ICR5);
//SERIAL_ECHOLNPAIR(" OCR5A=", OCR5A);
//SERIAL_ECHOLNPAIR(" OCR5B=", OCR5B);
//SERIAL_ECHOLNPAIR(" OCR5C=", OCR5C);
}
else {
// Restore the default for Timer 5
SET_WGM(5, PWM_PC_8); // PWM 8-bit (Phase Correct)
SET_COMS(5, NORMAL, NORMAL, NORMAL); // Do nothing
SET_CS(5, PRESCALER_64); // 16MHz / 64 = 250KHz
OCR5A = OCR5B = OCR5C = 0;
}
return round(count);
}
#endif
#endif // FASTIO_EXT_START
#endif // __AVR__
Marlin/src/HAL/AVR/fastio.h
+373
View File
@@ -0,0 +1,373 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast I/O Routines for AVR
* Use direct port manipulation to save scads of processor time.
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/
#include <avr/io.h>
#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
#define AVR_AT90USB1286_FAMILY 1
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
#define AVR_ATmega1284_FAMILY 1
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
#define AVR_ATmega2560_FAMILY 1
#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
#define AVR_ATmega2561_FAMILY 1
#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
#define AVR_ATmega328_FAMILY 1
#endif
/**
* Include Ports and Functions
*/
#if AVR_ATmega328_FAMILY
#include "fastio/fastio_168.h"
#elif AVR_ATmega1284_FAMILY
#include "fastio/fastio_644.h"
#elif AVR_ATmega2560_FAMILY
#include "fastio/fastio_1280.h"
#elif AVR_AT90USB1286_FAMILY
#include "fastio/fastio_AT90USB.h"
#elif AVR_ATmega2561_FAMILY
#include "fastio/fastio_1281.h"
#else
#error "No FastIO definition for the selected AVR Board."
#endif
/**
* Magic I/O routines
*
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
*
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
*/
#define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
#define _WRITE_NC(IO,V) do{ \
if (V) SBI(DIO ## IO ## _WPORT, DIO ## IO ## _PIN); \
else CBI(DIO ## IO ## _WPORT, DIO ## IO ## _PIN); \
}while(0)
#define _WRITE_C(IO,V) do{ \
uint8_t port_bits = DIO ## IO ## _WPORT; /* Get a mask from the current port bits */ \
if (V) port_bits = ~port_bits; /* For setting bits, invert the mask */ \
DIO ## IO ## _RPORT = port_bits & _BV(DIO ## IO ## _PIN); /* Atomically toggle the output port bits */ \
}while(0)
#define _WRITE(IO,V) do{ if (&(DIO ## IO ## _RPORT) < (uint8_t*)0x100) _WRITE_NC(IO,V); else _WRITE_C(IO,V); }while(0)
#define _TOGGLE(IO) (DIO ## IO ## _RPORT = _BV(DIO ## IO ## _PIN))
#define _SET_INPUT(IO) CBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _SET_OUTPUT(IO) SBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _IS_INPUT(IO) !TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _IS_OUTPUT(IO) TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
// digitalRead/Write wrappers
#ifdef FASTIO_EXT_START
void extDigitalWrite(const int8_t pin, const uint8_t state);
uint8_t extDigitalRead(const int8_t pin);
#else
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
#define extDigitalRead(IO) digitalRead(IO)
#endif
#define READ(IO) _READ(IO)
#define WRITE(IO,V) _WRITE(IO,V)
#define TOGGLE(IO) _TOGGLE(IO)
#define SET_INPUT(IO) _SET_INPUT(IO)
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
#define SET_INPUT_PULLDOWN SET_INPUT
#define SET_OUTPUT(IO) _SET_OUTPUT(IO)
#define SET_PWM SET_OUTPUT
#define IS_INPUT(IO) _IS_INPUT(IO)
#define IS_OUTPUT(IO) _IS_OUTPUT(IO)
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
/**
* Timer and Interrupt Control
*/
// Waveform Generation Modes
enum WaveGenMode : char {
WGM_NORMAL, // 0
WGM_PWM_PC_8, // 1
WGM_PWM_PC_9, // 2
WGM_PWM_PC_10, // 3
WGM_CTC_OCRnA, // 4 COM OCnx
WGM_FAST_PWM_8, // 5
WGM_FAST_PWM_9, // 6
WGM_FAST_PWM_10, // 7
WGM_PWM_PC_FC_ICRn, // 8
WGM_PWM_PC_FC_OCRnA, // 9 COM OCnA
WGM_PWM_PC_ICRn, // 10
WGM_PWM_PC_OCRnA, // 11 COM OCnA
WGM_CTC_ICRn, // 12 COM OCnx
WGM_reserved, // 13
WGM_FAST_PWM_ICRn, // 14 COM OCnA
WGM_FAST_PWM_OCRnA // 15 COM OCnA
};
// Wavefore Generation Modes (Timer 2 only)
enum WaveGenMode2 : char {
WGM2_NORMAL, // 0
WGM2_PWM_PC, // 1
WGM2_CTC_OCR2A, // 2
WGM2_FAST_PWM, // 3
WGM2_reserved_1, // 4
WGM2_PWM_PC_OCR2A, // 5
WGM2_reserved_2, // 6
WGM2_FAST_PWM_OCR2A, // 7
};
// Compare Modes
enum CompareMode : char {
COM_NORMAL, // 0
COM_TOGGLE, // 1 Non-PWM: OCnx ... Both PWM (WGM 9,11,14,15): OCnA only ... else NORMAL
COM_CLEAR_SET, // 2 Non-PWM: OCnx ... Fast PWM: OCnx/Bottom ... PF-FC: OCnx Up/Down
COM_SET_CLEAR // 3 Non-PWM: OCnx ... Fast PWM: OCnx/Bottom ... PF-FC: OCnx Up/Down
};
// Clock Sources
enum ClockSource : char {
CS_NONE, // 0
CS_PRESCALER_1, // 1
CS_PRESCALER_8, // 2
CS_PRESCALER_64, // 3
CS_PRESCALER_256, // 4
CS_PRESCALER_1024, // 5
CS_EXT_FALLING, // 6
CS_EXT_RISING // 7
};
// Clock Sources (Timer 2 only)
enum ClockSource2 : char {
CS2_NONE, // 0
CS2_PRESCALER_1, // 1
CS2_PRESCALER_8, // 2
CS2_PRESCALER_32, // 3
CS2_PRESCALER_64, // 4
CS2_PRESCALER_128, // 5
CS2_PRESCALER_256, // 6
CS2_PRESCALER_1024 // 7
};
// Get interrupt bits in an orderly way
// Ex: cs = GET_CS(0); coma1 = GET_COM(A,1);
#define GET_WGM(T) (((TCCR##T##A >> WGM##T##0) & 0x3) | ((TCCR##T##B >> WGM##T##2 << 2) & 0xC))
#define GET_CS(T) ((TCCR##T##B >> CS##T##0) & 0x7)
#define GET_COM(T,Q) ((TCCR##T##Q >> COM##T##Q##0) & 0x3)
#define GET_COMA(T) GET_COM(T,A)
#define GET_COMB(T) GET_COM(T,B)
#define GET_COMC(T) GET_COM(T,C)
#define GET_ICNC(T) (!!(TCCR##T##B & _BV(ICNC##T)))
#define GET_ICES(T) (!!(TCCR##T##B & _BV(ICES##T)))
#define GET_FOC(T,Q) (!!(TCCR##T##C & _BV(FOC##T##Q)))
#define GET_FOCA(T) GET_FOC(T,A)
#define GET_FOCB(T) GET_FOC(T,B)
#define GET_FOCC(T) GET_FOC(T,C)
// Set Wave Generation Mode bits
// Ex: SET_WGM(5,CTC_ICRn);
#define _SET_WGM(T,V) do{ \
TCCR##T##A = (TCCR##T##A & ~(0x3 << WGM##T##0)) | (( int(V) & 0x3) << WGM##T##0); \
TCCR##T##B = (TCCR##T##B & ~(0x3 << WGM##T##2)) | (((int(V) >> 2) & 0x3) << WGM##T##2); \
}while(0)
#define SET_WGM(T,V) _SET_WGM(T,WGM_##V)
// Runtime (see set_pwm_frequency):
#define _SET_WGMnQ(TCCRnQ, V) do{ \
*(TCCRnQ)[0] = (*(TCCRnQ)[0] & ~(0x3 << 0)) | (( int(V) & 0x3) << 0); \
*(TCCRnQ)[1] = (*(TCCRnQ)[1] & ~(0x3 << 3)) | (((int(V) >> 2) & 0x3) << 3); \
}while(0)
// Set Clock Select bits
// Ex: SET_CS3(PRESCALER_64);
#define _SET_CS(T,V) (TCCR##T##B = (TCCR##T##B & ~(0x7 << CS##T##0)) | ((int(V) & 0x7) << CS##T##0))
#define _SET_CS0(V) _SET_CS(0,V)
#define _SET_CS1(V) _SET_CS(1,V)
#ifdef TCCR2
#define _SET_CS2(V) (TCCR2 = (TCCR2 & ~(0x7 << CS20)) | (int(V) << CS20))
#else
#define _SET_CS2(V) _SET_CS(2,V)
#endif
#define _SET_CS3(V) _SET_CS(3,V)
#define _SET_CS4(V) _SET_CS(4,V)
#define _SET_CS5(V) _SET_CS(5,V)
#define SET_CS0(V) _SET_CS0(CS_##V)
#define SET_CS1(V) _SET_CS1(CS_##V)
#ifdef TCCR2
#define SET_CS2(V) _SET_CS2(CS2_##V)
#else
#define SET_CS2(V) _SET_CS2(CS_##V)
#endif
#define SET_CS3(V) _SET_CS3(CS_##V)
#define SET_CS4(V) _SET_CS4(CS_##V)
#define SET_CS5(V) _SET_CS5(CS_##V)
#define SET_CS(T,V) SET_CS##T(V)
// Runtime (see set_pwm_frequency)
#define _SET_CSn(TCCRnQ, V) do{ \
(*(TCCRnQ)[1] = (*(TCCRnQ[1]) & ~(0x7 << 0)) | ((int(V) & 0x7) << 0)); \
}while(0)
// Set Compare Mode bits
// Ex: SET_COMS(4,CLEAR_SET,CLEAR_SET,CLEAR_SET);
#define _SET_COM(T,Q,V) (TCCR##T##Q = (TCCR##T##Q & ~(0x3 << COM##T##Q##0)) | (int(V) << COM##T##Q##0))
#define SET_COM(T,Q,V) _SET_COM(T,Q,COM_##V)
#define SET_COMA(T,V) SET_COM(T,A,V)
#define SET_COMB(T,V) SET_COM(T,B,V)
#define SET_COMC(T,V) SET_COM(T,C,V)
#define SET_COMS(T,V1,V2,V3) do{ SET_COMA(T,V1); SET_COMB(T,V2); SET_COMC(T,V3); }while(0)
// Runtime (see set_pwm_duty)
#define _SET_COMnQ(TCCRnQ, Q, V) do{ \
(*(TCCRnQ)[0] = (*(TCCRnQ)[0] & ~(0x3 << (6-2*(Q)))) | (int(V) << (6-2*(Q)))); \
}while(0)
// Set OCRnQ register
// Runtime (see set_pwm_duty):
#define _SET_OCRnQ(OCRnQ, Q, V) do{ \
(*(OCRnQ)[(Q)] = (0x0000) | (int(V) & 0xFFFF)); \
}while(0)
// Set ICRn register (one per timer)
// Runtime (see set_pwm_frequency)
#define _SET_ICRn(ICRn, V) do{ \
(*(ICRn) = (0x0000) | (int(V) & 0xFFFF)); \
}while(0)
// Set Noise Canceler bit
// Ex: SET_ICNC(2,1)
#define SET_ICNC(T,V) (TCCR##T##B = (V) ? TCCR##T##B | _BV(ICNC##T) : TCCR##T##B & ~_BV(ICNC##T))
// Set Input Capture Edge Select bit
// Ex: SET_ICES(5,0)
#define SET_ICES(T,V) (TCCR##T##B = (V) ? TCCR##T##B | _BV(ICES##T) : TCCR##T##B & ~_BV(ICES##T))
// Set Force Output Compare bit
// Ex: SET_FOC(3,A,1)
#define SET_FOC(T,Q,V) (TCCR##T##C = (V) ? TCCR##T##C | _BV(FOC##T##Q) : TCCR##T##C & ~_BV(FOC##T##Q))
#define SET_FOCA(T,V) SET_FOC(T,A,V)
#define SET_FOCB(T,V) SET_FOC(T,B,V)
#define SET_FOCC(T,V) SET_FOC(T,C,V)
#if 0
/**
* PWM availability macros
*/
// Determine which harware PWMs are already in use
#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
#if PIN_EXISTS(CONTROLLER_FAN)
#define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
#else
#define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P)
#endif
#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7)
#if PIN_EXISTS(FAN7)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN)
#elif PIN_EXISTS(FAN6)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN)
#elif PIN_EXISTS(FAN5)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN)
#elif PIN_EXISTS(FAN4)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN)
#elif PIN_EXISTS(FAN3)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN)
#elif PIN_EXISTS(FAN2)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN)
#elif PIN_EXISTS(FAN1)
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN)
#else
#define PWM_CHK_FAN_A(P) (P == FAN0_PIN)
#endif
#else
#define PWM_CHK_FAN_A(P) false
#endif
#if HAS_MOTOR_CURRENT_PWM
#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
#define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E || P == MOTOR_CURRENT_PWM_Z || P == MOTOR_CURRENT_PWM_XY)
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
#define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E || P == MOTOR_CURRENT_PWM_Z)
#else
#define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E)
#endif
#else
#define PWM_CHK_MOTOR_CURRENT(P) false
#endif
#ifdef NUM_SERVOS
#if AVR_ATmega2560_FAMILY
#define PWM_CHK_SERVO(P) (P == 5 || (NUM_SERVOS > 12 && P == 6) || (NUM_SERVOS > 24 && P == 46)) // PWMS 3A, 4A & 5A
#elif AVR_ATmega2561_FAMILY
#define PWM_CHK_SERVO(P) (P == 5) // PWM3A
#elif AVR_ATmega1284_FAMILY
#define PWM_CHK_SERVO(P) false
#elif AVR_AT90USB1286_FAMILY
#define PWM_CHK_SERVO(P) (P == 16) // PWM3A
#elif AVR_ATmega328_FAMILY
#define PWM_CHK_SERVO(P) false
#endif
#else
#define PWM_CHK_SERVO(P) false
#endif
#if ENABLED(BARICUDA)
#if HAS_HEATER_1 && HAS_HEATER_2
#define PWM_CHK_HEATER(P) (P == HEATER_1_PIN || P == HEATER_2_PIN)
#elif HAS_HEATER_1
#define PWM_CHK_HEATER(P) (P == HEATER_1_PIN)
#endif
#else
#define PWM_CHK_HEATER(P) false
#endif
#define PWM_CHK(P) (PWM_CHK_HEATER(P) || PWM_CHK_SERVO(P) || PWM_CHK_MOTOR_CURRENT(P) || PWM_CHK_FAN_A(P) || PWM_CHK_FAN_B(P))
#endif // PWM_CHK is not used in Marlin
// define which hardware PWMs are available for the current CPU
// all timer 1 PWMS deleted from this list because they are never available
#if AVR_ATmega2560_FAMILY
#define PWM_PIN(P) ((P >= 2 && P <= 10) || P == 13 || P == 44 || P == 45 || P == 46)
#elif AVR_ATmega2561_FAMILY
#define PWM_PIN(P) ((P >= 2 && P <= 6) || P == 9)
#elif AVR_ATmega1284_FAMILY
#define PWM_PIN(P) (P == 3 || P == 4 || P == 14 || P == 15)
#elif AVR_AT90USB1286_FAMILY
#define PWM_PIN(P) (P == 0 || P == 1 || P == 14 || P == 15 || P == 16 || P == 24)
#elif AVR_ATmega328_FAMILY
#define PWM_PIN(P) (P == 3 || P == 5 || P == 6 || P == 11)
#else
#error "unknown CPU"
#endif
Marlin/src/HAL/AVR/fastio/fastio_1280.h
+1114
View File
File diff suppressed because it is too large Load Diff
Marlin/src/HAL/AVR/fastio/fastio_1281.h
+715
View File
@@ -0,0 +1,715 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Pin mapping for the 1281 and 2561
*
* Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04
* Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
*/
#include "../fastio.h"
// change for your board
#define DEBUG_LED DIO46
// UART
#define RXD DIO0
#define TXD DIO1
// SPI
#define SCK DIO10
#define MISO DIO12
#define MOSI DIO11
#define SS DIO16
// TWI (I2C)
#define SCL DIO17
#define SDA DIO18
// Timers and PWM
#define OC0A DIO9
#define OC0B DIO4
#define OC1A DIO7
#define OC1B DIO8
#define OC2A DIO6
#define OC3A DIO5
#define OC3B DIO2
#define OC3C DIO3
// Digital I/O
#define DIO0_PIN PINE0
#define DIO0_RPORT PINE
#define DIO0_WPORT PORTE
#define DIO0_DDR DDRE
#define DIO0_PWM nullptr
#define DIO1_PIN PINE1
#define DIO1_RPORT PINE
#define DIO1_WPORT PORTE
#define DIO1_DDR DDRE
#define DIO1_PWM nullptr
#define DIO2_PIN PINE4
#define DIO2_RPORT PINE
#define DIO2_WPORT PORTE
#define DIO2_DDR DDRE
#define DIO2_PWM &OCR3BL
#define DIO3_PIN PINE5
#define DIO3_RPORT PINE
#define DIO3_WPORT PORTE
#define DIO3_DDR DDRE
#define DIO3_PWM &OCR3CL
#define DIO4_PIN PING5
#define DIO4_RPORT PING
#define DIO4_WPORT PORTG
#define DIO4_DDR DDRG
#define DIO4_PWM &OCR0B
#define DIO5_PIN PINE3
#define DIO5_RPORT PINE
#define DIO5_WPORT PORTE
#define DIO5_DDR DDRE
#define DIO5_PWM &OCR3AL
#define DIO6_PIN PINB4
#define DIO6_RPORT PINB
#define DIO6_WPORT PORTB
#define DIO6_DDR DDRB
#define DIO6_PWM &OCR2AL
#define DIO7_PIN PINB5
#define DIO7_RPORT PINB
#define DIO7_WPORT PORTB
#define DIO7_DDR DDRB
#define DIO7_PWM &OCR1AL
#define DIO8_PIN PINB6
#define DIO8_RPORT PINB
#define DIO8_WPORT PORTB
#define DIO8_DDR DDRB
#define DIO8_PWM &OCR1BL
#define DIO9_PIN PINB7
#define DIO9_RPORT PINB
#define DIO9_WPORT PORTB
#define DIO9_DDR DDRB
#define DIO9_PWM &OCR0AL
#define DIO10_PIN PINB1
#define DIO10_RPORT PINB
#define DIO10_WPORT PORTB
#define DIO10_DDR DDRB
#define DIO10_PWM nullptr
#define DIO11_PIN PINB2
#define DIO11_RPORT PINB
#define DIO11_WPORT PORTB
#define DIO11_DDR DDRB
#define DIO11_PWM nullptr
#define DIO12_PIN PINB3
#define DIO12_RPORT PINB
#define DIO12_WPORT PORTB
#define DIO12_DDR DDRB
#define DIO12_PWM nullptr
#define DIO13_PIN PINE2
#define DIO13_RPORT PINE
#define DIO13_WPORT PORTE
#define DIO13_DDR DDRE
#define DIO13_PWM nullptr
#define DIO14_PIN PINE6
#define DIO14_RPORT PINE
#define DIO14_WPORT PORTE
#define DIO14_DDR DDRE
#define DIO14_PWM nullptr
#define DIO15_PIN PINE7
#define DIO15_RPORT PINE
#define DIO15_WPORT PORTE
#define DIO15_DDR DDRE
#define DIO15_PWM nullptr
#define DIO16_PIN PINB0
#define DIO16_RPORT PINB
#define DIO16_WPORT PORTB
#define DIO16_DDR DDRB
#define DIO16_PWM nullptr
#define DIO17_PIN PIND0
#define DIO17_RPORT PIND
#define DIO17_WPORT PORTD
#define DIO17_DDR DDRD
#define DIO17_PWM nullptr
#define DIO18_PIN PIND1
#define DIO18_RPORT PIND
#define DIO18_WPORT PORTD
#define DIO18_DDR DDRD
#define DIO18_PWM nullptr
#define DIO19_PIN PIND2
#define DIO19_RPORT PIND
#define DIO19_WPORT PORTD
#define DIO19_DDR DDRD
#define DIO19_PWM nullptr
#define DIO20_PIN PIND3
#define DIO20_RPORT PIND
#define DIO20_WPORT PORTD
#define DIO20_DDR DDRD
#define DIO20_PWM nullptr
#define DIO21_PIN PIND4
#define DIO21_RPORT PIND
#define DIO21_WPORT PORTD
#define DIO21_DDR DDRD
#define DIO21_PWM nullptr
#define DIO22_PIN PIND5
#define DIO22_RPORT PIND
#define DIO22_WPORT PORTD
#define DIO22_DDR DDRD
#define DIO22_PWM nullptr
#define DIO23_PIN PIND6
#define DIO23_RPORT PIND
#define DIO23_WPORT PORTD
#define DIO23_DDR DDRD
#define DIO23_PWM nullptr
#define DIO24_PIN PIND7
#define DIO24_RPORT PIND
#define DIO24_WPORT PORTD
#define DIO24_DDR DDRD
#define DIO24_PWM nullptr
#define DIO25_PIN PING0
#define DIO25_RPORT PING
#define DIO25_WPORT PORTG
#define DIO25_DDR DDRG
#define DIO25_PWM nullptr
#define DIO26_PIN PING1
#define DIO26_RPORT PING
#define DIO26_WPORT PORTG
#define DIO26_DDR DDRG
#define DIO26_PWM nullptr
#define DIO27_PIN PING2
#define DIO27_RPORT PING
#define DIO27_WPORT PORTG
#define DIO27_DDR DDRG
#define DIO27_PWM nullptr
#define DIO28_PIN PING3
#define DIO28_RPORT PING
#define DIO28_WPORT PORTG
#define DIO28_DDR DDRG
#define DIO28_PWM nullptr
#define DIO29_PIN PING4
#define DIO29_RPORT PING
#define DIO29_WPORT PORTG
#define DIO29_DDR DDRG
#define DIO29_PWM nullptr
#define DIO30_PIN PINC0
#define DIO30_RPORT PINC
#define DIO30_WPORT PORTC
#define DIO30_DDR DDRC
#define DIO30_PWM nullptr
#define DIO31_PIN PINC1
#define DIO31_RPORT PINC
#define DIO31_WPORT PORTC
#define DIO31_DDR DDRC
#define DIO31_PWM nullptr
#define DIO32_PIN PINC2
#define DIO32_RPORT PINC
#define DIO32_WPORT PORTC
#define DIO32_DDR DDRC
#define DIO32_PWM nullptr
#define DIO33_PIN PINC3
#define DIO33_RPORT PINC
#define DIO33_WPORT PORTC
#define DIO33_DDR DDRC
#define DIO33_PWM nullptr
#define DIO34_PIN PINC4
#define DIO34_RPORT PINC
#define DIO34_WPORT PORTC
#define DIO34_DDR DDRC
#define DIO34_PWM nullptr
#define DIO35_PIN PINC5
#define DIO35_RPORT PINC
#define DIO35_WPORT PORTC
#define DIO35_DDR DDRC
#define DIO35_PWM nullptr
#define DIO36_PIN PINC6
#define DIO36_RPORT PINC
#define DIO36_WPORT PORTC
#define DIO36_DDR DDRC
#define DIO36_PWM nullptr
#define DIO37_PIN PINC7
#define DIO37_RPORT PINC
#define DIO37_WPORT PORTC
#define DIO37_DDR DDRC
#define DIO37_PWM nullptr
#define DIO38_PIN PINA0
#define DIO38_RPORT PINA
#define DIO38_WPORT PORTA
#define DIO38_DDR DDRA
#define DIO38_PWM nullptr
#define DIO39_PIN PINA1
#define DIO39_RPORT PINA
#define DIO39_WPORT PORTA
#define DIO39_DDR DDRA
#define DIO39_PWM nullptr
#define DIO40_PIN PINA2
#define DIO40_RPORT PINA
#define DIO40_WPORT PORTA
#define DIO40_DDR DDRA
#define DIO40_PWM nullptr
#define DIO41_PIN PINA3
#define DIO41_RPORT PINA
#define DIO41_WPORT PORTA
#define DIO41_DDR DDRA
#define DIO41_PWM nullptr
#define DIO42_PIN PINA4
#define DIO42_RPORT PINA
#define DIO42_WPORT PORTA
#define DIO42_DDR DDRA
#define DIO42_PWM nullptr
#define DIO43_PIN PINA5
#define DIO43_RPORT PINA
#define DIO43_WPORT PORTA
#define DIO43_DDR DDRA
#define DIO43_PWM nullptr
#define DIO44_PIN PINA6
#define DIO44_RPORT PINA
#define DIO44_WPORT PORTA
#define DIO44_DDR DDRA
#define DIO44_PWM nullptr
#define DIO45_PIN PINA7
#define DIO45_RPORT PINA
#define DIO45_WPORT PORTA
#define DIO45_DDR DDRA
#define DIO45_PWM nullptr
#define DIO46_PIN PINF0
#define DIO46_RPORT PINF
#define DIO46_WPORT PORTF
#define DIO46_DDR DDRF
#define DIO46_PWM nullptr
#define DIO47_PIN PINF1
#define DIO47_RPORT PINF
#define DIO47_WPORT PORTF
#define DIO47_DDR DDRF
#define DIO47_PWM nullptr
#define DIO48_PIN PINF2
#define DIO48_RPORT PINF
#define DIO48_WPORT PORTF
#define DIO48_DDR DDRF
#define DIO48_PWM nullptr
#define DIO49_PIN PINF3
#define DIO49_RPORT PINF
#define DIO49_WPORT PORTF
#define DIO49_DDR DDRF
#define DIO49_PWM nullptr
#define DIO50_PIN PINF4
#define DIO50_RPORT PINF
#define DIO50_WPORT PORTF
#define DIO50_DDR DDRF
#define DIO50_PWM nullptr
#define DIO51_PIN PINF5
#define DIO51_RPORT PINF
#define DIO51_WPORT PORTF
#define DIO51_DDR DDRF
#define DIO51_PWM nullptr
#define DIO52_PIN PINF6
#define DIO52_RPORT PINF
#define DIO52_WPORT PORTF
#define DIO52_DDR DDRF
#define DIO52_PWM nullptr
#define DIO53_PIN PINF7
#define DIO53_RPORT PINF
#define DIO53_WPORT PORTF
#define DIO53_DDR DDRF
#define DIO53_PWM nullptr
#undef PA0
#define PA0_PIN PINA0
#define PA0_RPORT PINA
#define PA0_WPORT PORTA
#define PA0_DDR DDRA
#define PA0_PWM nullptr
#undef PA1
#define PA1_PIN PINA1
#define PA1_RPORT PINA
#define PA1_WPORT PORTA
#define PA1_DDR DDRA
#define PA1_PWM nullptr
#undef PA2
#define PA2_PIN PINA2
#define PA2_RPORT PINA
#define PA2_WPORT PORTA
#define PA2_DDR DDRA
#define PA2_PWM nullptr
#undef PA3
#define PA3_PIN PINA3
#define PA3_RPORT PINA
#define PA3_WPORT PORTA
#define PA3_DDR DDRA
#define PA3_PWM nullptr
#undef PA4
#define PA4_PIN PINA4
#define PA4_RPORT PINA
#define PA4_WPORT PORTA
#define PA4_DDR DDRA
#define PA4_PWM nullptr
#undef PA5
#define PA5_PIN PINA5
#define PA5_RPORT PINA
#define PA5_WPORT PORTA
#define PA5_DDR DDRA
#define PA5_PWM nullptr
#undef PA6
#define PA6_PIN PINA6
#define PA6_RPORT PINA
#define PA6_WPORT PORTA
#define PA6_DDR DDRA
#define PA6_PWM nullptr
#undef PA7
#define PA7_PIN PINA7
#define PA7_RPORT PINA
#define PA7_WPORT PORTA
#define PA7_DDR DDRA
#define PA7_PWM nullptr
#undef PB0
#define PB0_PIN PINB0
#define PB0_RPORT PINB
#define PB0_WPORT PORTB
#define PB0_DDR DDRB
#define PB0_PWM nullptr
#undef PB1
#define PB1_PIN PINB1
#define PB1_RPORT PINB
#define PB1_WPORT PORTB
#define PB1_DDR DDRB
#define PB1_PWM nullptr
#undef PB2
#define PB2_PIN PINB2
#define PB2_RPORT PINB
#define PB2_WPORT PORTB
#define PB2_DDR DDRB
#define PB2_PWM nullptr
#undef PB3
#define PB3_PIN PINB3
#define PB3_RPORT PINB
#define PB3_WPORT PORTB
#define PB3_DDR DDRB
#define PB3_PWM nullptr
#undef PB4
#define PB4_PIN PINB4
#define PB4_RPORT PINB
#define PB4_WPORT PORTB
#define PB4_DDR DDRB
#define PB4_PWM &OCR2A
#undef PB5
#define PB5_PIN PINB5
#define PB5_RPORT PINB
#define PB5_WPORT PORTB
#define PB5_DDR DDRB
#define PB5_PWM nullptr
#undef PB6
#define PB6_PIN PINB6
#define PB6_RPORT PINB
#define PB6_WPORT PORTB
#define PB6_DDR DDRB
#define PB6_PWM nullptr
#undef PB7
#define PB7_PIN PINB7
#define PB7_RPORT PINB
#define PB7_WPORT PORTB
#define PB7_DDR DDRB
#define PB7_PWM &OCR0A
#undef PC0
#define PC0_PIN PINC0
#define PC0_RPORT PINC
#define PC0_WPORT PORTC
#define PC0_DDR DDRC
#define PC0_PWM nullptr
#undef PC1
#define PC1_PIN PINC1
#define PC1_RPORT PINC
#define PC1_WPORT PORTC
#define PC1_DDR DDRC
#define PC1_PWM nullptr
#undef PC2
#define PC2_PIN PINC2
#define PC2_RPORT PINC
#define PC2_WPORT PORTC
#define PC2_DDR DDRC
#define PC2_PWM nullptr
#undef PC3
#define PC3_PIN PINC3
#define PC3_RPORT PINC
#define PC3_WPORT PORTC
#define PC3_DDR DDRC
#define PC3_PWM nullptr
#undef PC4
#define PC4_PIN PINC4
#define PC4_RPORT PINC
#define PC4_WPORT PORTC
#define PC4_DDR DDRC
#define PC4_PWM nullptr
#undef PC5
#define PC5_PIN PINC5
#define PC5_RPORT PINC
#define PC5_WPORT PORTC
#define PC5_DDR DDRC
#define PC5_PWM nullptr
#undef PC6
#define PC6_PIN PINC6
#define PC6_RPORT PINC
#define PC6_WPORT PORTC
#define PC6_DDR DDRC
#define PC6_PWM nullptr
#undef PC7
#define PC7_PIN PINC7
#define PC7_RPORT PINC
#define PC7_WPORT PORTC
#define PC7_DDR DDRC
#define PC7_PWM nullptr
#undef PD0
#define PD0_PIN PIND0
#define PD0_RPORT PIND
#define PD0_WPORT PORTD
#define PD0_DDR DDRD
#define PD0_PWM nullptr
#undef PD1
#define PD1_PIN PIND1
#define PD1_RPORT PIND
#define PD1_WPORT PORTD
#define PD1_DDR DDRD
#define PD1_PWM nullptr
#undef PD2
#define PD2_PIN PIND2
#define PD2_RPORT PIND
#define PD2_WPORT PORTD
#define PD2_DDR DDRD
#define PD2_PWM nullptr
#undef PD3
#define PD3_PIN PIND3
#define PD3_RPORT PIND
#define PD3_WPORT PORTD
#define PD3_DDR DDRD
#define PD3_PWM nullptr
#undef PD4
#define PD4_PIN PIND4
#define PD4_RPORT PIND
#define PD4_WPORT PORTD
#define PD4_DDR DDRD
#define PD4_PWM nullptr
#undef PD5
#define PD5_PIN PIND5
#define PD5_RPORT PIND
#define PD5_WPORT PORTD
#define PD5_DDR DDRD
#define PD5_PWM nullptr
#undef PD6
#define PD6_PIN PIND6
#define PD6_RPORT PIND
#define PD6_WPORT PORTD
#define PD6_DDR DDRD
#define PD6_PWM nullptr
#undef PD7
#define PD7_PIN PIND7
#define PD7_RPORT PIND
#define PD7_WPORT PORTD
#define PD7_DDR DDRD
#define PD7_PWM nullptr
#undef PE0
#define PE0_PIN PINE0
#define PE0_RPORT PINE
#define PE0_WPORT PORTE
#define PE0_DDR DDRE
#define PE0_PWM nullptr
#undef PE1
#define PE1_PIN PINE1
#define PE1_RPORT PINE
#define PE1_WPORT PORTE
#define PE1_DDR DDRE
#define PE1_PWM nullptr
#undef PE2
#define PE2_PIN PINE2
#define PE2_RPORT PINE
#define PE2_WPORT PORTE
#define PE2_DDR DDRE
#define PE2_PWM nullptr
#undef PE3
#define PE3_PIN PINE3
#define PE3_RPORT PINE
#define PE3_WPORT PORTE
#define PE3_DDR DDRE
#define PE3_PWM &OCR3AL
#undef PE4
#define PE4_PIN PINE4
#define PE4_RPORT PINE
#define PE4_WPORT PORTE
#define PE4_DDR DDRE
#define PE4_PWM &OCR3BL
#undef PE5
#define PE5_PIN PINE5
#define PE5_RPORT PINE
#define PE5_WPORT PORTE
#define PE5_DDR DDRE
#define PE5_PWM &OCR3CL
#undef PE6
#define PE6_PIN PINE6
#define PE6_RPORT PINE
#define PE6_WPORT PORTE
#define PE6_DDR DDRE
#define PE6_PWM nullptr
#undef PE7
#define PE7_PIN PINE7
#define PE7_RPORT PINE
#define PE7_WPORT PORTE
#define PE7_DDR DDRE
#define PE7_PWM nullptr
#undef PF0
#define PF0_PIN PINF0
#define PF0_RPORT PINF
#define PF0_WPORT PORTF
#define PF0_DDR DDRF
#define PF0_PWM nullptr
#undef PF1
#define PF1_PIN PINF1
#define PF1_RPORT PINF
#define PF1_WPORT PORTF
#define PF1_DDR DDRF
#define PF1_PWM nullptr
#undef PF2
#define PF2_PIN PINF2
#define PF2_RPORT PINF
#define PF2_WPORT PORTF
#define PF2_DDR DDRF
#define PF2_PWM nullptr
#undef PF3
#define PF3_PIN PINF3
#define PF3_RPORT PINF
#define PF3_WPORT PORTF
#define PF3_DDR DDRF
#define PF3_PWM nullptr
#undef PF4
#define PF4_PIN PINF4
#define PF4_RPORT PINF
#define PF4_WPORT PORTF
#define PF4_DDR DDRF
#define PF4_PWM nullptr
#undef PF5
#define PF5_PIN PINF5
#define PF5_RPORT PINF
#define PF5_WPORT PORTF
#define PF5_DDR DDRF
#define PF5_PWM nullptr
#undef PF6
#define PF6_PIN PINF6
#define PF6_RPORT PINF
#define PF6_WPORT PORTF
#define PF6_DDR DDRF
#define PF6_PWM nullptr
#undef PF7
#define PF7_PIN PINF7
#define PF7_RPORT PINF
#define PF7_WPORT PORTF
#define PF7_DDR DDRF
#define PF7_PWM nullptr
#undef PG0
#define PG0_PIN PING0
#define PG0_RPORT PING
#define PG0_WPORT PORTG
#define PG0_DDR DDRG
#define PG0_PWM nullptr
#undef PG1
#define PG1_PIN PING1
#define PG1_RPORT PING
#define PG1_WPORT PORTG
#define PG1_DDR DDRG
#define PG1_PWM nullptr
#undef PG2
#define PG2_PIN PING2
#define PG2_RPORT PING
#define PG2_WPORT PORTG
#define PG2_DDR DDRG
#define PG2_PWM nullptr
#undef PG3
#define PG3_PIN PING3
#define PG3_RPORT PING
#define PG3_WPORT PORTG
#define PG3_DDR DDRG
#define PG3_PWM nullptr
#undef PG4
#define PG4_PIN PING4
#define PG4_RPORT PING
#define PG4_WPORT PORTG
#define PG4_DDR DDRG
#define PG4_PWM nullptr
#undef PG5
#define PG5_PIN PING5
#define PG5_RPORT PING
#define PG5_WPORT PORTG
#define PG5_DDR DDRG
#define PG5_PWM &OCR0B
Marlin/src/HAL/AVR/fastio/fastio_168.h
+357
View File
@@ -0,0 +1,357 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Pin mapping for the 168, 328, and 328P
*
* Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07
* Port: B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
*/
#include "../fastio.h"
#define DEBUG_LED AIO5
// UART
#define RXD DIO0
#define TXD DIO1
// SPI
#define SCK DIO13
#define MISO DIO12
#define MOSI DIO11
#define SS DIO10
// TWI (I2C)
#define SCL AIO5
#define SDA AIO4
// Timers and PWM
#define OC0A DIO6
#define OC0B DIO5
#define OC1A DIO9
#define OC1B DIO10
#define OC2A DIO11
#define OC2B DIO3
// Digital I/O
#define DIO0_PIN PIND0
#define DIO0_RPORT PIND
#define DIO0_WPORT PORTD
#define DIO0_DDR DDRD
#define DIO0_PWM nullptr
#define DIO1_PIN PIND1
#define DIO1_RPORT PIND
#define DIO1_WPORT PORTD
#define DIO1_DDR DDRD
#define DIO1_PWM nullptr
#define DIO2_PIN PIND2
#define DIO2_RPORT PIND
#define DIO2_WPORT PORTD
#define DIO2_DDR DDRD
#define DIO2_PWM nullptr
#define DIO3_PIN PIND3
#define DIO3_RPORT PIND
#define DIO3_WPORT PORTD
#define DIO3_DDR DDRD
#define DIO3_PWM &OCR2B
#define DIO4_PIN PIND4
#define DIO4_RPORT PIND
#define DIO4_WPORT PORTD
#define DIO4_DDR DDRD
#define DIO4_PWM nullptr
#define DIO5_PIN PIND5
#define DIO5_RPORT PIND
#define DIO5_WPORT PORTD
#define DIO5_DDR DDRD
#define DIO5_PWM &OCR0B
#define DIO6_PIN PIND6
#define DIO6_RPORT PIND
#define DIO6_WPORT PORTD
#define DIO6_DDR DDRD
#define DIO6_PWM &OCR0A
#define DIO7_PIN PIND7
#define DIO7_RPORT PIND
#define DIO7_WPORT PORTD
#define DIO7_DDR DDRD
#define DIO7_PWM nullptr
#define DIO8_PIN PINB0
#define DIO8_RPORT PINB
#define DIO8_WPORT PORTB
#define DIO8_DDR DDRB
#define DIO8_PWM nullptr
#define DIO9_PIN PINB1
#define DIO9_RPORT PINB
#define DIO9_WPORT PORTB
#define DIO9_DDR DDRB
#define DIO9_PWM nullptr
#define DIO10_PIN PINB2
#define DIO10_RPORT PINB
#define DIO10_WPORT PORTB
#define DIO10_DDR DDRB
#define DIO10_PWM nullptr
#define DIO11_PIN PINB3
#define DIO11_RPORT PINB
#define DIO11_WPORT PORTB
#define DIO11_DDR DDRB
#define DIO11_PWM &OCR2A
#define DIO12_PIN PINB4
#define DIO12_RPORT PINB
#define DIO12_WPORT PORTB
#define DIO12_DDR DDRB
#define DIO12_PWM nullptr
#define DIO13_PIN PINB5
#define DIO13_RPORT PINB
#define DIO13_WPORT PORTB
#define DIO13_DDR DDRB
#define DIO13_PWM nullptr
#define DIO14_PIN PINC0
#define DIO14_RPORT PINC
#define DIO14_WPORT PORTC
#define DIO14_DDR DDRC
#define DIO14_PWM nullptr
#define DIO15_PIN PINC1
#define DIO15_RPORT PINC
#define DIO15_WPORT PORTC
#define DIO15_DDR DDRC
#define DIO15_PWM nullptr
#define DIO16_PIN PINC2
#define DIO16_RPORT PINC
#define DIO16_WPORT PORTC
#define DIO16_DDR DDRC
#define DIO16_PWM nullptr
#define DIO17_PIN PINC3
#define DIO17_RPORT PINC
#define DIO17_WPORT PORTC
#define DIO17_DDR DDRC
#define DIO17_PWM nullptr
#define DIO18_PIN PINC4
#define DIO18_RPORT PINC
#define DIO18_WPORT PORTC
#define DIO18_DDR DDRC
#define DIO18_PWM nullptr
#define DIO19_PIN PINC5
#define DIO19_RPORT PINC
#define DIO19_WPORT PORTC
#define DIO19_DDR DDRC
#define DIO19_PWM nullptr
#define DIO20_PIN PINC6
#define DIO20_RPORT PINC
#define DIO20_WPORT PORTC
#define DIO20_DDR DDRC
#define DIO20_PWM nullptr
#define DIO21_PIN PINC7
#define DIO21_RPORT PINC
#define DIO21_WPORT PORTC
#define DIO21_DDR DDRC
#define DIO21_PWM nullptr
#undef PB0
#define PB0_PIN PINB0
#define PB0_RPORT PINB
#define PB0_WPORT PORTB
#define PB0_DDR DDRB
#define PB0_PWM nullptr
#undef PB1
#define PB1_PIN PINB1
#define PB1_RPORT PINB
#define PB1_WPORT PORTB
#define PB1_DDR DDRB
#define PB1_PWM nullptr
#undef PB2
#define PB2_PIN PINB2
#define PB2_RPORT PINB
#define PB2_WPORT PORTB
#define PB2_DDR DDRB
#define PB2_PWM nullptr
#undef PB3
#define PB3_PIN PINB3
#define PB3_RPORT PINB
#define PB3_WPORT PORTB
#define PB3_DDR DDRB
#define PB3_PWM &OCR2A
#undef PB4
#define PB4_PIN PINB4
#define PB4_RPORT PINB
#define PB4_WPORT PORTB
#define PB4_DDR DDRB
#define PB4_PWM nullptr
#undef PB5
#define PB5_PIN PINB5
#define PB5_RPORT PINB
#define PB5_WPORT PORTB
#define PB5_DDR DDRB
#define PB5_PWM nullptr
#undef PB6
#define PB6_PIN PINB6
#define PB6_RPORT PINB
#define PB6_WPORT PORTB
#define PB6_DDR DDRB
#define PB6_PWM nullptr
#undef PB7
#define PB7_PIN PINB7
#define PB7_RPORT PINB
#define PB7_WPORT PORTB
#define PB7_DDR DDRB
#define PB7_PWM nullptr
#undef PC0
#define PC0_PIN PINC0
#define PC0_RPORT PINC
#define PC0_WPORT PORTC
#define PC0_DDR DDRC
#define PC0_PWM nullptr
#undef PC1
#define PC1_PIN PINC1
#define PC1_RPORT PINC
#define PC1_WPORT PORTC
#define PC1_DDR DDRC
#define PC1_PWM nullptr
#undef PC2
#define PC2_PIN PINC2
#define PC2_RPORT PINC
#define PC2_WPORT PORTC
#define PC2_DDR DDRC
#define PC2_PWM nullptr
#undef PC3
#define PC3_PIN PINC3
#define PC3_RPORT PINC
#define PC3_WPORT PORTC
#define PC3_DDR DDRC
#define PC3_PWM nullptr
#undef PC4
#define PC4_PIN PINC4
#define PC4_RPORT PINC
#define PC4_WPORT PORTC
#define PC4_DDR DDRC
#define PC4_PWM nullptr
#undef PC5
#define PC5_PIN PINC5
#define PC5_RPORT PINC
#define PC5_WPORT PORTC
#define PC5_DDR DDRC
#define PC5_PWM nullptr
#undef PC6
#define PC6_PIN PINC6
#define PC6_RPORT PINC
#define PC6_WPORT PORTC
#define PC6_DDR DDRC
#define PC6_PWM nullptr
#undef PC7
#define PC7_PIN PINC7
#define PC7_RPORT PINC
#define PC7_WPORT PORTC
#define PC7_DDR DDRC
#define PC7_PWM nullptr
#undef PD0
#define PD0_PIN PIND0
#define PD0_RPORT PIND
#define PD0_WPORT PORTD
#define PD0_DDR DDRD
#define PD0_PWM nullptr
#undef PD1
#define PD1_PIN PIND1
#define PD1_RPORT PIND
#define PD1_WPORT PORTD
#define PD1_DDR DDRD
#define PD1_PWM nullptr
#undef PD2
#define PD2_PIN PIND2
#define PD2_RPORT PIND
#define PD2_WPORT PORTD
#define PD2_DDR DDRD
#define PD2_PWM nullptr
#undef PD3
#define PD3_PIN PIND3
#define PD3_RPORT PIND
#define PD3_WPORT PORTD
#define PD3_DDR DDRD
#define PD3_PWM &OCR2B
#undef PD4
#define PD4_PIN PIND4
#define PD4_RPORT PIND
#define PD4_WPORT PORTD
#define PD4_DDR DDRD
#define PD4_PWM nullptr
#undef PD5
#define PD5_PIN PIND5
#define PD5_RPORT PIND
#define PD5_WPORT PORTD
#define PD5_DDR DDRD
#define PD5_PWM &OCR0B
#undef PD6
#define PD6_PIN PIND6
#define PD6_RPORT PIND
#define PD6_WPORT PORTD
#define PD6_DDR DDRD
#define PD6_PWM &OCR0A
#undef PD7
#define PD7_PIN PIND7
#define PD7_RPORT PIND
#define PD7_WPORT PORTD
#define PD7_DDR DDRD
#define PD7_PWM nullptr
Marlin/src/HAL/AVR/fastio/fastio_644.h
+552
View File
@@ -0,0 +1,552 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Pin mapping for the 644, 644p, 644pa, and 1284p
*
* Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
* Port: B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0
*/
/** ATMega644
*
* +---\/---+
* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
* RST 9| |32 AREF
* VCC 10| |31 GND
* GND 11| |30 AVCC
* XTAL2 12| |29 PC7 (D 23)
* XTAL1 13| |28 PC6 (D 22)
* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
* +--------+
*/
#include "../fastio.h"
#define DEBUG_LED DIO0
// UART
#define RXD DIO8
#define TXD DIO9
#define RXD0 DIO8
#define TXD0 DIO9
#define RXD1 DIO10
#define TXD1 DIO11
// SPI
#define SCK DIO7
#define MISO DIO6
#define MOSI DIO5
#define SS DIO4
// TWI (I2C)
#define SCL DIO16
#define SDA DIO17
// Timers and PWM
#define OC0A DIO3
#define OC0B DIO4
#define OC1A DIO13
#define OC1B DIO12
#define OC2A DIO15
#define OC2B DIO14
// Digital I/O
#define DIO0_PIN PINB0
#define DIO0_RPORT PINB
#define DIO0_WPORT PORTB
#define DIO0_DDR DDRB
#define DIO0_PWM nullptr
#define DIO1_PIN PINB1
#define DIO1_RPORT PINB
#define DIO1_WPORT PORTB
#define DIO1_DDR DDRB
#define DIO1_PWM nullptr
#define DIO2_PIN PINB2
#define DIO2_RPORT PINB
#define DIO2_WPORT PORTB
#define DIO2_DDR DDRB
#define DIO2_PWM nullptr
#define DIO3_PIN PINB3
#define DIO3_RPORT PINB
#define DIO3_WPORT PORTB
#define DIO3_DDR DDRB
#define DIO3_PWM &OCR0A
#define DIO4_PIN PINB4
#define DIO4_RPORT PINB
#define DIO4_WPORT PORTB
#define DIO4_DDR DDRB
#define DIO4_PWM &OCR0B
#define DIO5_PIN PINB5
#define DIO5_RPORT PINB
#define DIO5_WPORT PORTB
#define DIO5_DDR DDRB
#define DIO5_PWM nullptr
#define DIO6_PIN PINB6
#define DIO6_RPORT PINB
#define DIO6_WPORT PORTB
#define DIO6_DDR DDRB
#define DIO6_PWM nullptr
#define DIO7_PIN PINB7
#define DIO7_RPORT PINB
#define DIO7_WPORT PORTB
#define DIO7_DDR DDRB
#define DIO7_PWM nullptr
#define DIO8_PIN PIND0
#define DIO8_RPORT PIND
#define DIO8_WPORT PORTD
#define DIO8_DDR DDRD
#define DIO8_PWM nullptr
#define DIO9_PIN PIND1
#define DIO9_RPORT PIND
#define DIO9_WPORT PORTD
#define DIO9_DDR DDRD
#define DIO9_PWM nullptr
#define DIO10_PIN PIND2
#define DIO10_RPORT PIND
#define DIO10_WPORT PORTD
#define DIO10_DDR DDRD
#define DIO10_PWM nullptr
#define DIO11_PIN PIND3
#define DIO11_RPORT PIND
#define DIO11_WPORT PORTD
#define DIO11_DDR DDRD
#define DIO11_PWM nullptr
#define DIO12_PIN PIND4
#define DIO12_RPORT PIND
#define DIO12_WPORT PORTD
#define DIO12_DDR DDRD
#define DIO12_PWM &OCR1B
#define DIO13_PIN PIND5
#define DIO13_RPORT PIND
#define DIO13_WPORT PORTD
#define DIO13_DDR DDRD
#define DIO13_PWM &OCR1A
#define DIO14_PIN PIND6
#define DIO14_RPORT PIND
#define DIO14_WPORT PORTD
#define DIO14_DDR DDRD
#define DIO14_PWM &OCR2B
#define DIO15_PIN PIND7
#define DIO15_RPORT PIND
#define DIO15_WPORT PORTD
#define DIO15_DDR DDRD
#define DIO15_PWM &OCR2A
#define DIO16_PIN PINC0
#define DIO16_RPORT PINC
#define DIO16_WPORT PORTC
#define DIO16_DDR DDRC
#define DIO16_PWM nullptr
#define DIO17_PIN PINC1
#define DIO17_RPORT PINC
#define DIO17_WPORT PORTC
#define DIO17_DDR DDRC
#define DIO17_PWM nullptr
#define DIO18_PIN PINC2
#define DIO18_RPORT PINC
#define DIO18_WPORT PORTC
#define DIO18_DDR DDRC
#define DIO18_PWM nullptr
#define DIO19_PIN PINC3
#define DIO19_RPORT PINC
#define DIO19_WPORT PORTC
#define DIO19_DDR DDRC
#define DIO19_PWM nullptr
#define DIO20_PIN PINC4
#define DIO20_RPORT PINC
#define DIO20_WPORT PORTC
#define DIO20_DDR DDRC
#define DIO20_PWM nullptr
#define DIO21_PIN PINC5
#define DIO21_RPORT PINC
#define DIO21_WPORT PORTC
#define DIO21_DDR DDRC
#define DIO21_PWM nullptr
#define DIO22_PIN PINC6
#define DIO22_RPORT PINC
#define DIO22_WPORT PORTC
#define DIO22_DDR DDRC
#define DIO22_PWM nullptr
#define DIO23_PIN PINC7
#define DIO23_RPORT PINC
#define DIO23_WPORT PORTC
#define DIO23_DDR DDRC
#define DIO23_PWM nullptr
#define DIO24_PIN PINA7
#define DIO24_RPORT PINA
#define DIO24_WPORT PORTA
#define DIO24_DDR DDRA
#define DIO24_PWM nullptr
#define DIO25_PIN PINA6
#define DIO25_RPORT PINA
#define DIO25_WPORT PORTA
#define DIO25_DDR DDRA
#define DIO25_PWM nullptr
#define DIO26_PIN PINA5
#define DIO26_RPORT PINA
#define DIO26_WPORT PORTA
#define DIO26_DDR DDRA
#define DIO26_PWM nullptr
#define DIO27_PIN PINA4
#define DIO27_RPORT PINA
#define DIO27_WPORT PORTA
#define DIO27_DDR DDRA
#define DIO27_PWM nullptr
#define DIO28_PIN PINA3
#define DIO28_RPORT PINA
#define DIO28_WPORT PORTA
#define DIO28_DDR DDRA
#define DIO28_PWM nullptr
#define DIO29_PIN PINA2
#define DIO29_RPORT PINA
#define DIO29_WPORT PORTA
#define DIO29_DDR DDRA
#define DIO29_PWM nullptr
#define DIO30_PIN PINA1
#define DIO30_RPORT PINA
#define DIO30_WPORT PORTA
#define DIO30_DDR DDRA
#define DIO30_PWM nullptr
#define DIO31_PIN PINA0
#define DIO31_RPORT PINA
#define DIO31_WPORT PORTA
#define DIO31_DDR DDRA
#define DIO31_PWM nullptr
#define AIO0_PIN PINA0
#define AIO0_RPORT PINA
#define AIO0_WPORT PORTA
#define AIO0_DDR DDRA
#define AIO0_PWM nullptr
#define AIO1_PIN PINA1
#define AIO1_RPORT PINA
#define AIO1_WPORT PORTA
#define AIO1_DDR DDRA
#define AIO1_PWM nullptr
#define AIO2_PIN PINA2
#define AIO2_RPORT PINA
#define AIO2_WPORT PORTA
#define AIO2_DDR DDRA
#define AIO2_PWM nullptr
#define AIO3_PIN PINA3
#define AIO3_RPORT PINA
#define AIO3_WPORT PORTA
#define AIO3_DDR DDRA
#define AIO3_PWM nullptr
#define AIO4_PIN PINA4
#define AIO4_RPORT PINA
#define AIO4_WPORT PORTA
#define AIO4_DDR DDRA
#define AIO4_PWM nullptr
#define AIO5_PIN PINA5
#define AIO5_RPORT PINA
#define AIO5_WPORT PORTA
#define AIO5_DDR DDRA
#define AIO5_PWM nullptr
#define AIO6_PIN PINA6
#define AIO6_RPORT PINA
#define AIO6_WPORT PORTA
#define AIO6_DDR DDRA
#define AIO6_PWM nullptr
#define AIO7_PIN PINA7
#define AIO7_RPORT PINA
#define AIO7_WPORT PORTA
#define AIO7_DDR DDRA
#define AIO7_PWM nullptr
#undef PA0
#define PA0_PIN PINA0
#define PA0_RPORT PINA
#define PA0_WPORT PORTA
#define PA0_DDR DDRA
#define PA0_PWM nullptr
#undef PA1
#define PA1_PIN PINA1
#define PA1_RPORT PINA
#define PA1_WPORT PORTA
#define PA1_DDR DDRA
#define PA1_PWM nullptr
#undef PA2
#define PA2_PIN PINA2
#define PA2_RPORT PINA
#define PA2_WPORT PORTA
#define PA2_DDR DDRA
#define PA2_PWM nullptr
#undef PA3
#define PA3_PIN PINA3
#define PA3_RPORT PINA
#define PA3_WPORT PORTA
#define PA3_DDR DDRA
#define PA3_PWM nullptr
#undef PA4
#define PA4_PIN PINA4
#define PA4_RPORT PINA
#define PA4_WPORT PORTA
#define PA4_DDR DDRA
#define PA4_PWM nullptr
#undef PA5
#define PA5_PIN PINA5
#define PA5_RPORT PINA
#define PA5_WPORT PORTA
#define PA5_DDR DDRA
#define PA5_PWM nullptr
#undef PA6
#define PA6_PIN PINA6
#define PA6_RPORT PINA
#define PA6_WPORT PORTA
#define PA6_DDR DDRA
#define PA6_PWM nullptr
#undef PA7
#define PA7_PIN PINA7
#define PA7_RPORT PINA
#define PA7_WPORT PORTA
#define PA7_DDR DDRA
#define PA7_PWM nullptr
#undef PB0
#define PB0_PIN PINB0
#define PB0_RPORT PINB
#define PB0_WPORT PORTB
#define PB0_DDR DDRB
#define PB0_PWM nullptr
#undef PB1
#define PB1_PIN PINB1
#define PB1_RPORT PINB
#define PB1_WPORT PORTB
#define PB1_DDR DDRB
#define PB1_PWM nullptr
#undef PB2
#define PB2_PIN PINB2
#define PB2_RPORT PINB
#define PB2_WPORT PORTB
#define PB2_DDR DDRB
#define PB2_PWM nullptr
#undef PB3
#define PB3_PIN PINB3
#define PB3_RPORT PINB
#define PB3_WPORT PORTB
#define PB3_DDR DDRB
#define PB3_PWM &OCR0A
#undef PB4
#define PB4_PIN PINB4
#define PB4_RPORT PINB
#define PB4_WPORT PORTB
#define PB4_DDR DDRB
#define PB4_PWM &OCR0B
#undef PB5
#define PB5_PIN PINB5
#define PB5_RPORT PINB
#define PB5_WPORT PORTB
#define PB5_DDR DDRB
#define PB5_PWM nullptr
#undef PB6
#define PB6_PIN PINB6
#define PB6_RPORT PINB
#define PB6_WPORT PORTB
#define PB6_DDR DDRB
#define PB6_PWM nullptr
#undef PB7
#define PB7_PIN PINB7
#define PB7_RPORT PINB
#define PB7_WPORT PORTB
#define PB7_DDR DDRB
#define PB7_PWM nullptr
#undef PC0
#define PC0_PIN PINC0
#define PC0_RPORT PINC
#define PC0_WPORT PORTC
#define PC0_DDR DDRC
#define PC0_PWM nullptr
#undef PC1
#define PC1_PIN PINC1
#define PC1_RPORT PINC
#define PC1_WPORT PORTC
#define PC1_DDR DDRC
#define PC1_PWM nullptr
#undef PC2
#define PC2_PIN PINC2
#define PC2_RPORT PINC
#define PC2_WPORT PORTC
#define PC2_DDR DDRC
#define PC2_PWM nullptr
#undef PC3
#define PC3_PIN PINC3
#define PC3_RPORT PINC
#define PC3_WPORT PORTC
#define PC3_DDR DDRC
#define PC3_PWM nullptr
#undef PC4
#define PC4_PIN PINC4
#define PC4_RPORT PINC
#define PC4_WPORT PORTC
#define PC4_DDR DDRC
#define PC4_PWM nullptr
#undef PC5
#define PC5_PIN PINC5
#define PC5_RPORT PINC
#define PC5_WPORT PORTC
#define PC5_DDR DDRC
#define PC5_PWM nullptr
#undef PC6
#define PC6_PIN PINC6
#define PC6_RPORT PINC
#define PC6_WPORT PORTC
#define PC6_DDR DDRC
#define PC6_PWM nullptr
#undef PC7
#define PC7_PIN PINC7
#define PC7_RPORT PINC
#define PC7_WPORT PORTC
#define PC7_DDR DDRC
#define PC7_PWM nullptr
#undef PD0
#define PD0_PIN PIND0
#define PD0_RPORT PIND
#define PD0_WPORT PORTD
#define PD0_DDR DDRD
#define PD0_PWM nullptr
#undef PD1
#define PD1_PIN PIND1
#define PD1_RPORT PIND
#define PD1_WPORT PORTD
#define PD1_DDR DDRD
#define PD1_PWM nullptr
#undef PD2
#define PD2_PIN PIND2
#define PD2_RPORT PIND
#define PD2_WPORT PORTD
#define PD2_DDR DDRD
#define PD2_PWM nullptr
#undef PD3
#define PD3_PIN PIND3
#define PD3_RPORT PIND
#define PD3_WPORT PORTD
#define PD3_DDR DDRD
#define PD3_PWM nullptr
#undef PD4
#define PD4_PIN PIND4
#define PD4_RPORT PIND
#define PD4_WPORT PORTD
#define PD4_DDR DDRD
#define PD4_PWM nullptr
#undef PD5
#define PD5_PIN PIND5
#define PD5_RPORT PIND
#define PD5_WPORT PORTD
#define PD5_DDR DDRD
#define PD5_PWM nullptr
#undef PD6
#define PD6_PIN PIND6
#define PD6_RPORT PIND
#define PD6_WPORT PORTD
#define PD6_DDR DDRD
#define PD6_PWM &OCR2B
#undef PD7
#define PD7_PIN PIND7
#define PD7_RPORT PIND
#define PD7_WPORT PORTD
#define PD7_DDR DDRD
#define PD7_PWM &OCR2A
Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h
+697
View File
@@ -0,0 +1,697 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Pin mapping (Teensy) for AT90USB646, 647, 1286, and 1287
*
* Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
* Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
* The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
*/
#include "../fastio.h"
// change for your board
#define DEBUG_LED DIO31 /* led D5 red */
// SPI
#define SCK DIO21 // 9
#define MISO DIO23 // 11
#define MOSI DIO22 // 10
#define SS DIO20 // 8
// Digital I/O
#define DIO0_PIN PIND0
#define DIO0_RPORT PIND
#define DIO0_WPORT PORTD
#define DIO0_PWM 0
#define DIO0_DDR DDRD
#define DIO1_PIN PIND1
#define DIO1_RPORT PIND
#define DIO1_WPORT PORTD
#define DIO1_PWM 0
#define DIO1_DDR DDRD
#define DIO2_PIN PIND2
#define DIO2_RPORT PIND
#define DIO2_WPORT PORTD
#define DIO2_PWM 0
#define DIO2_DDR DDRD
#define DIO3_PIN PIND3
#define DIO3_RPORT PIND
#define DIO3_WPORT PORTD
#define DIO3_PWM 0
#define DIO3_DDR DDRD
#define DIO4_PIN PIND4
#define DIO4_RPORT PIND
#define DIO4_WPORT PORTD
#define DIO4_PWM 0
#define DIO4_DDR DDRD
#define DIO5_PIN PIND5
#define DIO5_RPORT PIND
#define DIO5_WPORT PORTD
#define DIO5_PWM 0
#define DIO5_DDR DDRD
#define DIO6_PIN PIND6
#define DIO6_RPORT PIND
#define DIO6_WPORT PORTD
#define DIO6_PWM 0
#define DIO6_DDR DDRD
#define DIO7_PIN PIND7
#define DIO7_RPORT PIND
#define DIO7_WPORT PORTD
#define DIO7_PWM 0
#define DIO7_DDR DDRD
#define DIO8_PIN PINE0
#define DIO8_RPORT PINE
#define DIO8_WPORT PORTE
#define DIO8_PWM 0
#define DIO8_DDR DDRE
#define DIO9_PIN PINE1
#define DIO9_RPORT PINE
#define DIO9_WPORT PORTE
#define DIO9_PWM 0
#define DIO9_DDR DDRE
#define DIO10_PIN PINC0
#define DIO10_RPORT PINC
#define DIO10_WPORT PORTC
#define DIO10_PWM 0
#define DIO10_DDR DDRC
#define DIO11_PIN PINC1
#define DIO11_RPORT PINC
#define DIO11_WPORT PORTC
#define DIO11_PWM 0
#define DIO11_DDR DDRC
#define DIO12_PIN PINC2
#define DIO12_RPORT PINC
#define DIO12_WPORT PORTC
#define DIO12_PWM 0
#define DIO12_DDR DDRC
#define DIO13_PIN PINC3
#define DIO13_RPORT PINC
#define DIO13_WPORT PORTC
#define DIO13_PWM 0
#define DIO13_DDR DDRC
#define DIO14_PIN PINC4
#define DIO14_RPORT PINC
#define DIO14_WPORT PORTC
#define DIO14_PWM 0 // OC3C
#define DIO14_DDR DDRC
#define DIO15_PIN PINC5
#define DIO15_RPORT PINC
#define DIO15_WPORT PORTC
#define DIO15_PWM 0 // OC3B
#define DIO15_DDR DDRC
#define DIO16_PIN PINC6
#define DIO16_RPORT PINC
#define DIO16_WPORT PORTC
#define DIO16_PWM 0 // OC3A
#define DIO16_DDR DDRC
#define DIO17_PIN PINC7
#define DIO17_RPORT PINC
#define DIO17_WPORT PORTC
#define DIO17_PWM 0
#define DIO17_DDR DDRC
#define DIO18_PIN PINE6
#define DIO18_RPORT PINE
#define DIO18_WPORT PORTE
#define DIO18_PWM 0
#define DIO18_DDR DDRE
#define DIO19_PIN PINE7
#define DIO19_RPORT PINE
#define DIO19_WPORT PORTE
#define DIO19_PWM 0
#define DIO19_DDR DDRE
#define DIO20_PIN PINB0
#define DIO20_RPORT PINB
#define DIO20_WPORT PORTB
#define DIO20_PWM 0
#define DIO20_DDR DDRB
#define DIO21_PIN PINB1
#define DIO21_RPORT PINB
#define DIO21_WPORT PORTB
#define DIO21_PWM 0
#define DIO21_DDR DDRB
#define DIO22_PIN PINB2
#define DIO22_RPORT PINB
#define DIO22_WPORT PORTB
#define DIO22_PWM 0
#define DIO22_DDR DDRB
#define DIO23_PIN PINB3
#define DIO23_RPORT PINB
#define DIO23_WPORT PORTB
#define DIO23_PWM 0
#define DIO23_DDR DDRB
#define DIO24_PIN PINB4
#define DIO24_RPORT PINB
#define DIO24_WPORT PORTB
#define DIO24_PWM 0 // OC2A
#define DIO24_DDR DDRB
#define DIO25_PIN PINB5
#define DIO25_RPORT PINB
#define DIO25_WPORT PORTB
#define DIO25_PWM 0 // OC1A
#define DIO25_DDR DDRB
#define DIO26_PIN PINB6
#define DIO26_RPORT PINB
#define DIO26_WPORT PORTB
#define DIO26_PWM 0 // OC1B
#define DIO26_DDR DDRB
#define DIO27_PIN PINB7
#define DIO27_RPORT PINB
#define DIO27_WPORT PORTB
#define DIO27_PWM 0 // OC1C
#define DIO27_DDR DDRB
#define DIO28_PIN PINA0
#define DIO28_RPORT PINA
#define DIO28_WPORT PORTA
#define DIO28_PWM 0
#define DIO28_DDR DDRA
#define DIO29_PIN PINA1
#define DIO29_RPORT PINA
#define DIO29_WPORT PORTA
#define DIO29_PWM 0
#define DIO29_DDR DDRA
#define DIO30_PIN PINA2
#define DIO30_RPORT PINA
#define DIO30_WPORT PORTA
#define DIO30_PWM 0
#define DIO30_DDR DDRA
#define DIO31_PIN PINA3
#define DIO31_RPORT PINA
#define DIO31_WPORT PORTA
#define DIO31_PWM 0
#define DIO31_DDR DDRA
#define DIO32_PIN PINA4
#define DIO32_RPORT PINA
#define DIO32_WPORT PORTA
#define DIO32_PWM 0
#define DIO32_DDR DDRA
#define DIO33_PIN PINA5
#define DIO33_RPORT PINA
#define DIO33_WPORT PORTA
#define DIO33_PWM 0
#define DIO33_DDR DDRA
#define DIO34_PIN PINA6
#define DIO34_RPORT PINA
#define DIO34_WPORT PORTA
#define DIO34_PWM 0
#define DIO34_DDR DDRA
#define DIO35_PIN PINA7
#define DIO35_RPORT PINA
#define DIO35_WPORT PORTA
#define DIO35_PWM 0
#define DIO35_DDR DDRA
#define DIO36_PIN PINE4
#define DIO36_RPORT PINE
#define DIO36_WPORT PORTE
#define DIO36_PWM 0
#define DIO36_DDR DDRE
#define DIO37_PIN PINE5
#define DIO37_RPORT PINE
#define DIO37_WPORT PORTE
#define DIO37_PWM 0
#define DIO37_DDR DDRE
#define DIO38_PIN PINF0
#define DIO38_RPORT PINF
#define DIO38_WPORT PORTF
#define DIO38_PWM 0
#define DIO38_DDR DDRF
#define DIO39_PIN PINF1
#define DIO39_RPORT PINF
#define DIO39_WPORT PORTF
#define DIO39_PWM 0
#define DIO39_DDR DDRF
#define DIO40_PIN PINF2
#define DIO40_RPORT PINF
#define DIO40_WPORT PORTF
#define DIO40_PWM 0
#define DIO40_DDR DDRF
#define DIO41_PIN PINF3
#define DIO41_RPORT PINF
#define DIO41_WPORT PORTF
#define DIO41_PWM 0
#define DIO41_DDR DDRF
#define DIO42_PIN PINF4
#define DIO42_RPORT PINF
#define DIO42_WPORT PORTF
#define DIO42_PWM 0
#define DIO42_DDR DDRF
#define DIO43_PIN PINF5
#define DIO43_RPORT PINF
#define DIO43_WPORT PORTF
#define DIO43_PWM 0
#define DIO43_DDR DDRF
#define DIO44_PIN PINF6
#define DIO44_RPORT PINF
#define DIO44_WPORT PORTF
#define DIO44_PWM 0
#define DIO44_DDR DDRF
#define DIO45_PIN PINF7
#define DIO45_RPORT PINF
#define DIO45_WPORT PORTF
#define DIO45_PWM 0
#define DIO45_DDR DDRF
#define AIO0_PIN PINF0
#define AIO0_RPORT PINF
#define AIO0_WPORT PORTF
#define AIO0_PWM 0
#define AIO0_DDR DDRF
#define AIO1_PIN PINF1
#define AIO1_RPORT PINF
#define AIO1_WPORT PORTF
#define AIO1_PWM 0
#define AIO1_DDR DDRF
#define AIO2_PIN PINF2
#define AIO2_RPORT PINF
#define AIO2_WPORT PORTF
#define AIO2_PWM 0
#define AIO2_DDR DDRF
#define AIO3_PIN PINF3
#define AIO3_RPORT PINF
#define AIO3_WPORT PORTF
#define AIO3_PWM 0
#define AIO3_DDR DDRF
#define AIO4_PIN PINF4
#define AIO4_RPORT PINF
#define AIO4_WPORT PORTF
#define AIO4_PWM 0
#define AIO4_DDR DDRF
#define AIO5_PIN PINF5
#define AIO5_RPORT PINF
#define AIO5_WPORT PORTF
#define AIO5_PWM 0
#define AIO5_DDR DDRF
#define AIO6_PIN PINF6
#define AIO6_RPORT PINF
#define AIO6_WPORT PORTF
#define AIO6_PWM 0
#define AIO6_DDR DDRF
#define AIO7_PIN PINF7
#define AIO7_RPORT PINF
#define AIO7_WPORT PORTF
#define AIO7_PWM 0
#define AIO7_DDR DDRF
//-- Begin not supported by Teensyduino
//-- don't use Arduino functions on these pins pinMode/digitalWrite/etc
#define DIO46_PIN PINE2
#define DIO46_RPORT PINE
#define DIO46_WPORT PORTE
#define DIO46_PWM 0
#define DIO46_DDR DDRE
#define DIO47_PIN PINE3
#define DIO47_RPORT PINE
#define DIO47_WPORT PORTE
#define DIO47_PWM 0
#define DIO47_DDR DDRE
#define TEENSY_E2 46
#define TEENSY_E3 47
//-- end not supported by Teensyduino
#undef PA0
#define PA0_PIN PINA0
#define PA0_RPORT PINA
#define PA0_WPORT PORTA
#define PA0_PWM 0
#define PA0_DDR DDRA
#undef PA1
#define PA1_PIN PINA1
#define PA1_RPORT PINA
#define PA1_WPORT PORTA
#define PA1_PWM 0
#define PA1_DDR DDRA
#undef PA2
#define PA2_PIN PINA2
#define PA2_RPORT PINA
#define PA2_WPORT PORTA
#define PA2_PWM 0
#define PA2_DDR DDRA
#undef PA3
#define PA3_PIN PINA3
#define PA3_RPORT PINA
#define PA3_WPORT PORTA
#define PA3_PWM 0
#define PA3_DDR DDRA
#undef PA4
#define PA4_PIN PINA4
#define PA4_RPORT PINA
#define PA4_WPORT PORTA
#define PA4_PWM 0
#define PA4_DDR DDRA
#undef PA5
#define PA5_PIN PINA5
#define PA5_RPORT PINA
#define PA5_WPORT PORTA
#define PA5_PWM 0
#define PA5_DDR DDRA
#undef PA6
#define PA6_PIN PINA6
#define PA6_RPORT PINA
#define PA6_WPORT PORTA
#define PA6_PWM 0
#define PA6_DDR DDRA
#undef PA7
#define PA7_PIN PINA7
#define PA7_RPORT PINA
#define PA7_WPORT PORTA
#define PA7_PWM 0
#define PA7_DDR DDRA
#undef PB0
#define PB0_PIN PINB0
#define PB0_RPORT PINB
#define PB0_WPORT PORTB
#define PB0_PWM 0
#define PB0_DDR DDRB
#undef PB1
#define PB1_PIN PINB1
#define PB1_RPORT PINB
#define PB1_WPORT PORTB
#define PB1_PWM 0
#define PB1_DDR DDRB
#undef PB2
#define PB2_PIN PINB2
#define PB2_RPORT PINB
#define PB2_WPORT PORTB
#define PB2_PWM 0
#define PB2_DDR DDRB
#undef PB3
#define PB3_PIN PINB3
#define PB3_RPORT PINB
#define PB3_WPORT PORTB
#define PB3_PWM 0
#define PB3_DDR DDRB
#undef PB4
#define PB4_PIN PINB4
#define PB4_RPORT PINB
#define PB4_WPORT PORTB
#define PB4_PWM 0
#define PB4_DDR DDRB
#undef PB5
#define PB5_PIN PINB5
#define PB5_RPORT PINB
#define PB5_WPORT PORTB
#define PB5_PWM 0
#define PB5_DDR DDRB
#undef PB6
#define PB6_PIN PINB6
#define PB6_RPORT PINB
#define PB6_WPORT PORTB
#define PB6_PWM 0
#define PB6_DDR DDRB
#undef PB7
#define PB7_PIN PINB7
#define PB7_RPORT PINB
#define PB7_WPORT PORTB
#define PB7_PWM 0
#define PB7_DDR DDRB
#undef PC0
#define PC0_PIN PINC0
#define PC0_RPORT PINC
#define PC0_WPORT PORTC
#define PC0_PWM 0
#define PC0_DDR DDRC
#undef PC1
#define PC1_PIN PINC1
#define PC1_RPORT PINC
#define PC1_WPORT PORTC
#define PC1_PWM 0
#define PC1_DDR DDRC
#undef PC2
#define PC2_PIN PINC2
#define PC2_RPORT PINC
#define PC2_WPORT PORTC
#define PC2_PWM 0
#define PC2_DDR DDRC
#undef PC3
#define PC3_PIN PINC3
#define PC3_RPORT PINC
#define PC3_WPORT PORTC
#define PC3_PWM 0
#define PC3_DDR DDRC
#undef PC4
#define PC4_PIN PINC4
#define PC4_RPORT PINC
#define PC4_WPORT PORTC
#define PC4_PWM 0
#define PC4_DDR DDRC
#undef PC5
#define PC5_PIN PINC5
#define PC5_RPORT PINC
#define PC5_WPORT PORTC
#define PC5_PWM 0
#define PC5_DDR DDRC
#undef PC6
#define PC6_PIN PINC6
#define PC6_RPORT PINC
#define PC6_WPORT PORTC
#define PC6_PWM 0
#define PC6_DDR DDRC
#undef PC7
#define PC7_PIN PINC7
#define PC7_RPORT PINC
#define PC7_WPORT PORTC
#define PC7_PWM 0
#define PC7_DDR DDRC
#undef PD0
#define PD0_PIN PIND0
#define PD0_RPORT PIND
#define PD0_WPORT PORTD
#define PD0_PWM 0 // OC0B
#define PD0_DDR DDRD
#undef PD1
#define PD1_PIN PIND1
#define PD1_RPORT PIND
#define PD1_WPORT PORTD
#define PD1_PWM 0 // OC2B
#define PD1_DDR DDRD
#undef PD2
#define PD2_PIN PIND2
#define PD2_RPORT PIND
#define PD2_WPORT PORTD
#define PD2_PWM 0
#define PD2_DDR DDRD
#undef PD3
#define PD3_PIN PIND3
#define PD3_RPORT PIND
#define PD3_WPORT PORTD
#define PD3_PWM 0
#define PD3_DDR DDRD
#undef PD4
#define PD4_PIN PIND4
#define PD4_RPORT PIND
#define PD4_WPORT PORTD
#define PD4_PWM 0
#define PD4_DDR DDRD
#undef PD5
#define PD5_PIN PIND5
#define PD5_RPORT PIND
#define PD5_WPORT PORTD
#define PD5_PWM 0
#define PD5_DDR DDRD
#undef PD6
#define PD6_PIN PIND6
#define PD6_RPORT PIND
#define PD6_WPORT PORTD
#define PD6_PWM 0
#define PD6_DDR DDRD
#undef PD7
#define PD7_PIN PIND7
#define PD7_RPORT PIND
#define PD7_WPORT PORTD
#define PD7_PWM 0
#define PD7_DDR DDRD
#undef PE0
#define PE0_PIN PINE0
#define PE0_RPORT PINE
#define PE0_WPORT PORTE
#define PE0_PWM 0
#define PE0_DDR DDRE
#undef PE1
#define PE1_PIN PINE1
#define PE1_RPORT PINE
#define PE1_WPORT PORTE
#define PE1_PWM 0
#define PE1_DDR DDRE
#undef PE2
#define PE2_PIN PINE2
#define PE2_RPORT PINE
#define PE2_WPORT PORTE
#define PE2_PWM 0
#define PE2_DDR DDRE
#undef PE3
#define PE3_PIN PINE3
#define PE3_RPORT PINE
#define PE3_WPORT PORTE
#define PE3_PWM 0
#define PE3_DDR DDRE
#undef PE4
#define PE4_PIN PINE4
#define PE4_RPORT PINE
#define PE4_WPORT PORTE
#define PE4_PWM 0
#define PE4_DDR DDRE
#undef PE5
#define PE5_PIN PINE5
#define PE5_RPORT PINE
#define PE5_WPORT PORTE
#define PE5_PWM 0
#define PE5_DDR DDRE
#undef PE6
#define PE6_PIN PINE6
#define PE6_RPORT PINE
#define PE6_WPORT PORTE
#define PE6_PWM 0
#define PE6_DDR DDRE
#undef PE7
#define PE7_PIN PINE7
#define PE7_RPORT PINE
#define PE7_WPORT PORTE
#define PE7_PWM 0
#define PE7_DDR DDRE
#undef PF0
#define PF0_PIN PINF0
#define PF0_RPORT PINF
#define PF0_WPORT PORTF
#define PF0_PWM 0
#define PF0_DDR DDRF
#undef PF1
#define PF1_PIN PINF1
#define PF1_RPORT PINF
#define PF1_WPORT PORTF
#define PF1_PWM 0
#define PF1_DDR DDRF
#undef PF2
#define PF2_PIN PINF2
#define PF2_RPORT PINF
#define PF2_WPORT PORTF
#define PF2_PWM 0
#define PF2_DDR DDRF
#undef PF3
#define PF3_PIN PINF3
#define PF3_RPORT PINF
#define PF3_WPORT PORTF
#define PF3_PWM 0
#define PF3_DDR DDRF
#undef PF4
#define PF4_PIN PINF4
#define PF4_RPORT PINF
#define PF4_WPORT PORTF
#define PF4_PWM 0
#define PF4_DDR DDRF
#undef PF5
#define PF5_PIN PINF5
#define PF5_RPORT PINF
#define PF5_WPORT PORTF
#define PF5_PWM 0
#define PF5_DDR DDRF
#undef PF6
#define PF6_PIN PINF6
#define PF6_RPORT PINF
#define PF6_WPORT PORTF
#define PF6_PWM 0
#define PF6_DDR DDRF
#undef PF7
#define PF7_PIN PINF7
#define PF7_RPORT PINF
#define PF7_WPORT PORTF
#define PF7_PWM 0
#define PF7_DDR DDRF
/**
* Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
* do not function the same as the other Arduino extensions.
*/
//digitalPinToTimer(pin) function works like Arduino but Timers are not defined
#define TIMER0B 1
#define TIMER1A 7
#define TIMER1B 8
#define TIMER1C 9
#define TIMER2A 6
#define TIMER2B 2
#define TIMER3A 5
#define TIMER3B 4
#define TIMER3C 3
Marlin/src/HAL/AVR/inc/Conditionals_LCD.h
+26
View File
@@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if HAS_SPI_TFT || HAS_FSMC_TFT
#error "Sorry! TFT displays are not available for HAL/AVR."
#endif
Marlin/src/HAL/AVR/inc/Conditionals_adv.h
+22
View File
@@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
Marlin/src/HAL/AVR/inc/Conditionals_post.h
+22
View File
@@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
Marlin/src/HAL/AVR/inc/SanityCheck.h
+65
View File
@@ -0,0 +1,65 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Test AVR-specific configuration values for errors at compile-time.
*/
/**
* Checks for FAST PWM
*/
#if ENABLED(FAST_PWM_FAN) && (ENABLED(USE_OCR2A_AS_TOP) && defined(TCCR2))
#error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
#endif
/**
* Sanity checks for Spindle / Laser PWM
*/
#if ENABLED(SPINDLE_LASER_PWM)
#include "../ServoTimers.h" // Needed to check timer availability (_useTimer3)
#if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
#error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
#elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
#error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
#endif
#elif defined(SPINDLE_LASER_FREQUENCY)
#error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_PWM."
#endif
/**
* The Trinamic library includes SoftwareSerial.h, leading to a compile error.
*/
#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
#error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
#endif
#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
#error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
#endif
/**
* Postmortem debugging
*/
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not supported on AVR boards."
#endif
Marlin/src/HAL/AVR/math.h
+113
View File
@@ -0,0 +1,113 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Optimized math functions for AVR
*/
// intRes = longIn1 * longIn2 >> 24
// uses:
// A[tmp] to store 0
// B[tmp] to store bits 16-23 of the 48bit result. The top bit is used to round the two byte result.
// note that the lower two bytes and the upper byte of the 48bit result are not calculated.
// this can cause the result to be out by one as the lower bytes may cause carries into the upper ones.
// B A are bits 24-39 and are the returned value
// C B A is longIn1
// D C B A is longIn2
//
static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) {
uint8_t tmp1;
uint8_t tmp2;
uint16_t intRes;
__asm__ __volatile__(
A("clr %[tmp1]")
A("mul %A[longIn1], %B[longIn2]")
A("mov %[tmp2], r1")
A("mul %B[longIn1], %C[longIn2]")
A("movw %A[intRes], r0")
A("mul %C[longIn1], %C[longIn2]")
A("add %B[intRes], r0")
A("mul %C[longIn1], %B[longIn2]")
A("add %A[intRes], r0")
A("adc %B[intRes], r1")
A("mul %A[longIn1], %C[longIn2]")
A("add %[tmp2], r0")
A("adc %A[intRes], r1")
A("adc %B[intRes], %[tmp1]")
A("mul %B[longIn1], %B[longIn2]")
A("add %[tmp2], r0")
A("adc %A[intRes], r1")
A("adc %B[intRes], %[tmp1]")
A("mul %C[longIn1], %A[longIn2]")
A("add %[tmp2], r0")
A("adc %A[intRes], r1")
A("adc %B[intRes], %[tmp1]")
A("mul %B[longIn1], %A[longIn2]")
A("add %[tmp2], r1")
A("adc %A[intRes], %[tmp1]")
A("adc %B[intRes], %[tmp1]")
A("lsr %[tmp2]")
A("adc %A[intRes], %[tmp1]")
A("adc %B[intRes], %[tmp1]")
A("mul %D[longIn2], %A[longIn1]")
A("add %A[intRes], r0")
A("adc %B[intRes], r1")
A("mul %D[longIn2], %B[longIn1]")
A("add %B[intRes], r0")
A("clr r1")
: [intRes] "=&r" (intRes),
[tmp1] "=&r" (tmp1),
[tmp2] "=&r" (tmp2)
: [longIn1] "d" (longIn1),
[longIn2] "d" (longIn2)
: "cc"
);
return intRes;
}
// intRes = intIn1 * intIn2 >> 16
// uses:
// r26 to store 0
// r27 to store the byte 1 of the 24 bit result
static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
uint8_t tmp;
uint16_t intRes;
__asm__ __volatile__ (
A("clr %[tmp]")
A("mul %[charIn1], %B[intIn2]")
A("movw %A[intRes], r0")
A("mul %[charIn1], %A[intIn2]")
A("add %A[intRes], r1")
A("adc %B[intRes], %[tmp]")
A("lsr r0")
A("adc %A[intRes], %[tmp]")
A("adc %B[intRes], %[tmp]")
A("clr r1")
: [intRes] "=&r" (intRes),
[tmp] "=&r" (tmp)
: [charIn1] "d" (charIn1),
[intIn2] "d" (intIn2)
: "cc"
);
return intRes;
}
Marlin/src/HAL/AVR/pinsDebug.h
+395
View File
@@ -0,0 +1,395 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* PWM print routines for Atmel 8 bit AVR CPUs
*/
#include "../../inc/MarlinConfig.h"
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
#define AVR_ATmega2560_FAMILY_PLUS_70 1
#endif
#if AVR_AT90USB1286_FAMILY
// Working with Teensyduino extension so need to re-define some things
#include "pinsDebug_Teensyduino.h"
// Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
// portModeRegister takes a different argument
#define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
#define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
#define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
#define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
#elif AVR_ATmega2560_FAMILY_PLUS_70 // So we can access/display all the pins on boards using more than 70
#include "pinsDebug_plus_70.h"
#define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
#define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
#define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
#else
#define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
#define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
#define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
#endif
#define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
#if AVR_ATmega1284_FAMILY
#define DIGITAL_PIN_TO_ANALOG_PIN(P) int(analogInputToDigitalPin(0) - (P))
#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(7) && (P) <= analogInputToDigitalPin(0))
#else
#define DIGITAL_PIN_TO_ANALOG_PIN(P) int((P) - analogInputToDigitalPin(0))
#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7)))
#endif
#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
#define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin
void PRINT_ARRAY_NAME(uint8_t x) {
char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
LOOP_L_N(y, MAX_NAME_LENGTH) {
char temp_char = pgm_read_byte(name_mem_pointer + y);
if (temp_char != 0)
SERIAL_CHAR(temp_char);
else {
LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
break;
}
}
}
#define GET_ARRAY_IS_DIGITAL(x) pgm_read_byte(&pin_array[x].is_digital)
#if defined(__AVR_ATmega1284P__) // 1284 IDE extensions set this to the number of
#undef NUM_DIGITAL_PINS // digital only pins while all other CPUs have it
#define NUM_DIGITAL_PINS 32 // set to digital only + digital/analog
#endif
#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), V); SERIAL_ECHO(buffer); }while(0)
#define PWM_CASE(N,Z) \
case TIMER##N##Z: \
if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \
PWM_PRINT(OCR##N##Z); \
return true; \
} else return false
/**
* Print a pin's PWM status.
* Return true if it's currently a PWM pin.
*/
static bool pwm_status(uint8_t pin) {
char buffer[20]; // for the sprintf statements
switch (digitalPinToTimer_DEBUG(pin)) {
#if defined(TCCR0A) && defined(COM0A1)
#ifdef TIMER0A
#if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs
PWM_CASE(0, A);
#endif
#endif
PWM_CASE(0, B);
#endif
#if defined(TCCR1A) && defined(COM1A1)
PWM_CASE(1, A);
PWM_CASE(1, B);
#if defined(COM1C1) && defined(TIMER1C)
PWM_CASE(1, C);
#endif
#endif
#if defined(TCCR2A) && defined(COM2A1)
PWM_CASE(2, A);
PWM_CASE(2, B);
#endif
#if defined(TCCR3A) && defined(COM3A1)
PWM_CASE(3, A);
PWM_CASE(3, B);
#ifdef COM3C1
PWM_CASE(3, C);
#endif
#endif
#ifdef TCCR4A
PWM_CASE(4, A);
PWM_CASE(4, B);
PWM_CASE(4, C);
#endif
#if defined(TCCR5A) && defined(COM5A1)
PWM_CASE(5, A);
PWM_CASE(5, B);
PWM_CASE(5, C);
#endif
case NOT_ON_TIMER:
default:
return false;
}
SERIAL_ECHO_SP(2);
} // pwm_status
const volatile uint8_t* const PWM_other[][3] PROGMEM = {
{ &TCCR0A, &TCCR0B, &TIMSK0 },
{ &TCCR1A, &TCCR1B, &TIMSK1 },
#if defined(TCCR2A) && defined(COM2A1)
{ &TCCR2A, &TCCR2B, &TIMSK2 },
#endif
#if defined(TCCR3A) && defined(COM3A1)
{ &TCCR3A, &TCCR3B, &TIMSK3 },
#endif
#ifdef TCCR4A
{ &TCCR4A, &TCCR4B, &TIMSK4 },
#endif
#if defined(TCCR5A) && defined(COM5A1)
{ &TCCR5A, &TCCR5B, &TIMSK5 },
#endif
};
const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
#ifdef TIMER0A
{ &OCR0A, &OCR0B, 0 },
#else
{ 0, &OCR0B, 0 },
#endif
#if defined(COM1C1) && defined(TIMER1C)
{ (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, (const uint8_t*)&OCR1C },
#else
{ (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, 0 },
#endif
#if defined(TCCR2A) && defined(COM2A1)
{ &OCR2A, &OCR2B, 0 },
#endif
#if defined(TCCR3A) && defined(COM3A1)
#ifdef COM3C1
{ (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, (const uint8_t*)&OCR3C },
#else
{ (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, 0 },
#endif
#endif
#ifdef TCCR4A
{ (const uint8_t*)&OCR4A, (const uint8_t*)&OCR4B, (const uint8_t*)&OCR4C },
#endif
#if defined(TCCR5A) && defined(COM5A1)
{ (const uint8_t*)&OCR5A, (const uint8_t*)&OCR5B, (const uint8_t*)&OCR5C },
#endif
};
#define TCCR_A(T) pgm_read_word(&PWM_other[T][0])
#define TCCR_B(T) pgm_read_word(&PWM_other[T][1])
#define TIMSK(T) pgm_read_word(&PWM_other[T][2])
#define CS_0 0
#define CS_1 1
#define CS_2 2
#define WGM_0 0
#define WGM_1 1
#define WGM_2 3
#define WGM_3 4
#define TOIE 0
#define OCR_VAL(T, L) pgm_read_word(&PWM_OCR[T][L])
static void err_is_counter() { SERIAL_ECHOPGM(" non-standard PWM mode"); }
static void err_is_interrupt() { SERIAL_ECHOPGM(" compare interrupt enabled"); }
static void err_prob_interrupt() { SERIAL_ECHOPGM(" overflow interrupt enabled"); }
static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); }
inline void com_print(const uint8_t N, const uint8_t Z) {
const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
SERIAL_ECHOPAIR(" COM", AS_CHAR('0' + N));
SERIAL_CHAR(Z);
SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
}
void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - WGM bit layout
char buffer[20]; // for the sprintf statements
const uint8_t *TCCRB = (uint8_t*)TCCR_B(T),
*TCCRA = (uint8_t*)TCCR_A(T);
uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
SERIAL_ECHOPAIR(" TIMER", AS_CHAR(T + '0'));
SERIAL_CHAR(L);
SERIAL_ECHO_SP(3);
if (N == 3) {
const uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A');
PWM_PRINT(*OCRVAL8);
}
else {
const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
PWM_PRINT(*OCRVAL16);
}
SERIAL_ECHOPAIR(" WGM: ", WGM);
com_print(T,L);
SERIAL_ECHOPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
SERIAL_ECHOPAIR(" TCCR", AS_CHAR(T + '0'), "A: ", *TCCRA);
SERIAL_ECHOPAIR(" TCCR", AS_CHAR(T + '0'), "B: ", *TCCRB);
const uint8_t *TMSK = (uint8_t*)TIMSK(T);
SERIAL_ECHOPAIR(" TIMSK", AS_CHAR(T + '0'), ": ", *TMSK);
const uint8_t OCIE = L - 'A' + 1;
if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); }
else { if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) err_is_counter(); }
if (TEST(*TMSK, OCIE)) err_is_interrupt();
if (TEST(*TMSK, TOIE)) err_prob_interrupt();
}
static void pwm_details(uint8_t pin) {
switch (digitalPinToTimer_DEBUG(pin)) {
#if defined(TCCR0A) && defined(COM0A1)
#ifdef TIMER0A
#if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs
case TIMER0A: timer_prefix(0, 'A', 3); break;
#endif
#endif
case TIMER0B: timer_prefix(0, 'B', 3); break;
#endif
#if defined(TCCR1A) && defined(COM1A1)
case TIMER1A: timer_prefix(1, 'A', 4); break;
case TIMER1B: timer_prefix(1, 'B', 4); break;
#if defined(COM1C1) && defined(TIMER1C)
case TIMER1C: timer_prefix(1, 'C', 4); break;
#endif
#endif
#if defined(TCCR2A) && defined(COM2A1)
case TIMER2A: timer_prefix(2, 'A', 3); break;
case TIMER2B: timer_prefix(2, 'B', 3); break;
#endif
#if defined(TCCR3A) && defined(COM3A1)
case TIMER3A: timer_prefix(3, 'A', 4); break;
case TIMER3B: timer_prefix(3, 'B', 4); break;
#ifdef COM3C1
case TIMER3C: timer_prefix(3, 'C', 4); break;
#endif
#endif
#ifdef TCCR4A
case TIMER4A: timer_prefix(4, 'A', 4); break;
case TIMER4B: timer_prefix(4, 'B', 4); break;
case TIMER4C: timer_prefix(4, 'C', 4); break;
#endif
#if defined(TCCR5A) && defined(COM5A1)
case TIMER5A: timer_prefix(5, 'A', 4); break;
case TIMER5B: timer_prefix(5, 'B', 4); break;
case TIMER5C: timer_prefix(5, 'C', 4); break;
#endif
case NOT_ON_TIMER: break;
}
SERIAL_ECHOPGM(" ");
// on pins that have two PWMs, print info on second PWM
#if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY
// looking for port B7 - PWMs 0A and 1C
if (digitalPinToPort_DEBUG(pin) == 'B' - 64 && 0x80 == digitalPinToBitMask_DEBUG(pin)) {
#if !AVR_AT90USB1286_FAMILY
SERIAL_ECHOPGM("\n .");
SERIAL_ECHO_SP(18);
SERIAL_ECHOPGM("TIMER1C");
print_is_also_tied();
timer_prefix(1, 'C', 4);
#else
SERIAL_ECHOPGM("\n .");
SERIAL_ECHO_SP(18);
SERIAL_ECHOPGM("TIMER0A");
print_is_also_tied();
timer_prefix(0, 'A', 3);
#endif
}
#else
UNUSED(print_is_also_tied);
#endif
} // pwm_details
#ifndef digitalRead_mod // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed
const uint8_t port = digitalPinToPort_DEBUG(pin);
return (port != NOT_A_PIN) && (*portInputRegister(port) & digitalPinToBitMask_DEBUG(pin)) ? HIGH : LOW;
}
#endif
#ifndef PRINT_PORT
void print_port(int8_t pin) { // print port number
#ifdef digitalPinToPort_DEBUG
uint8_t x;
SERIAL_ECHOPGM(" Port: ");
#if AVR_AT90USB1286_FAMILY
x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64;
#else
x = digitalPinToPort_DEBUG(pin) + 64;
#endif
SERIAL_CHAR(x);
#if AVR_AT90USB1286_FAMILY
if (pin == 46)
x = '2';
else if (pin == 47)
x = '3';
else {
uint8_t temp = digitalPinToBitMask_DEBUG(pin);
for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1;
}
#else
uint8_t temp = digitalPinToBitMask_DEBUG(pin);
for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1;
#endif
SERIAL_CHAR(x);
#else
SERIAL_ECHO_SP(10);
#endif
}
#define PRINT_PORT(p) print_port(p)
#endif
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h
+108
View File
@@ -0,0 +1,108 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
//
// some of the pin mapping functions of the Teensduino extension to the Arduino IDE
// do not function the same as the other Arduino extensions
//
#define TEENSYDUINO_IDE
//digitalPinToTimer(pin) function works like Arduino but Timers are not defined
#define TIMER0B 1
#define TIMER1A 7
#define TIMER1B 8
#define TIMER1C 9
#define TIMER2A 6
#define TIMER2B 2
#define TIMER3A 5
#define TIMER3B 4
#define TIMER3C 3
// digitalPinToPort function just returns the pin number so need to create our own
#define PA 1
#define PB 2
#define PC 3
#define PD 4
#define PE 5
#define PF 6
#undef digitalPinToPort
const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
PD, // 0 - PD0 - INT0 - PWM
PD, // 1 - PD1 - INT1 - PWM
PD, // 2 - PD2 - INT2 - RX
PD, // 3 - PD3 - INT3 - TX
PD, // 4 - PD4
PD, // 5 - PD5
PD, // 6 - PD6
PD, // 7 - PD7
PE, // 8 - PE0
PE, // 9 - PE1
PC, // 10 - PC0
PC, // 11 - PC1
PC, // 12 - PC2
PC, // 13 - PC3
PC, // 14 - PC4 - PWM
PC, // 15 - PC5 - PWM
PC, // 16 - PC6 - PWM
PC, // 17 - PC7
PE, // 18 - PE6 - INT6
PE, // 19 - PE7 - INT7
PB, // 20 - PB0
PB, // 21 - PB1
PB, // 22 - PB2
PB, // 23 - PB3
PB, // 24 - PB4 - PWM
PB, // 25 - PB5 - PWM
PB, // 26 - PB6 - PWM
PB, // 27 - PB7 - PWM
PA, // 28 - PA0
PA, // 29 - PA1
PA, // 30 - PA2
PA, // 31 - PA3
PA, // 32 - PA4
PA, // 33 - PA5
PA, // 34 - PA6
PA, // 35 - PA7
PE, // 36 - PE4 - INT4
PE, // 37 - PE5 - INT5
PF, // 38 - PF0 - A0
PF, // 39 - PF1 - A1
PF, // 40 - PF2 - A2
PF, // 41 - PF3 - A3
PF, // 42 - PF4 - A4
PF, // 43 - PF5 - A5
PF, // 44 - PF6 - A6
PF, // 45 - PF7 - A7
PE, // 46 - PE2 (not defined in teensyduino)
PE, // 47 - PE3 (not defined in teensyduino)
};
#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
// digitalPinToBitMask(pin) is OK
#define digitalRead_mod(p) extDigitalRead(p) // Teensyduino's version of digitalRead doesn't
// disable the PWMs so we can use it as is
// portModeRegister(pin) is OK
Marlin/src/HAL/AVR/pinsDebug_plus_70.h
+329
View File
@@ -0,0 +1,329 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Structures for 2560 family boards that use more than 70 pins
*/
#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
#undef NUM_DIGITAL_PINS
#define NUM_DIGITAL_PINS 85
#elif MB(MIGHTYBOARD_REVE)
#undef NUM_DIGITAL_PINS
#define NUM_DIGITAL_PINS 80
#endif
#define PA 1
#define PB 2
#define PC 3
#define PD 4
#define PE 5
#define PF 6
#define PG 7
#define PH 8
#define PJ 10
#define PK 11
#define PL 12
const uint8_t PROGMEM digital_pin_to_port_PGM_plus_70[] = {
// PORTLIST
// ------------------------
PE , // PE 0 ** 0 ** USART0_RX
PE , // PE 1 ** 1 ** USART0_TX
PE , // PE 4 ** 2 ** PWM2
PE , // PE 5 ** 3 ** PWM3
PG , // PG 5 ** 4 ** PWM4
PE , // PE 3 ** 5 ** PWM5
PH , // PH 3 ** 6 ** PWM6
PH , // PH 4 ** 7 ** PWM7
PH , // PH 5 ** 8 ** PWM8
PH , // PH 6 ** 9 ** PWM9
PB , // PB 4 ** 10 ** PWM10
PB , // PB 5 ** 11 ** PWM11
PB , // PB 6 ** 12 ** PWM12
PB , // PB 7 ** 13 ** PWM13
PJ , // PJ 1 ** 14 ** USART3_TX
PJ , // PJ 0 ** 15 ** USART3_RX
PH , // PH 1 ** 16 ** USART2_TX
PH , // PH 0 ** 17 ** USART2_RX
PD , // PD 3 ** 18 ** USART1_TX
PD , // PD 2 ** 19 ** USART1_RX
PD , // PD 1 ** 20 ** I2C_SDA
PD , // PD 0 ** 21 ** I2C_SCL
PA , // PA 0 ** 22 ** D22
PA , // PA 1 ** 23 ** D23
PA , // PA 2 ** 24 ** D24
PA , // PA 3 ** 25 ** D25
PA , // PA 4 ** 26 ** D26
PA , // PA 5 ** 27 ** D27
PA , // PA 6 ** 28 ** D28
PA , // PA 7 ** 29 ** D29
PC , // PC 7 ** 30 ** D30
PC , // PC 6 ** 31 ** D31
PC , // PC 5 ** 32 ** D32
PC , // PC 4 ** 33 ** D33
PC , // PC 3 ** 34 ** D34
PC , // PC 2 ** 35 ** D35
PC , // PC 1 ** 36 ** D36
PC , // PC 0 ** 37 ** D37
PD , // PD 7 ** 38 ** D38
PG , // PG 2 ** 39 ** D39
PG , // PG 1 ** 40 ** D40
PG , // PG 0 ** 41 ** D41
PL , // PL 7 ** 42 ** D42
PL , // PL 6 ** 43 ** D43
PL , // PL 5 ** 44 ** D44
PL , // PL 4 ** 45 ** D45
PL , // PL 3 ** 46 ** D46
PL , // PL 2 ** 47 ** D47
PL , // PL 1 ** 48 ** D48
PL , // PL 0 ** 49 ** D49
PB , // PB 3 ** 50 ** SPI_MISO
PB , // PB 2 ** 51 ** SPI_MOSI
PB , // PB 1 ** 52 ** SPI_SCK
PB , // PB 0 ** 53 ** SPI_SS
PF , // PF 0 ** 54 ** A0
PF , // PF 1 ** 55 ** A1
PF , // PF 2 ** 56 ** A2
PF , // PF 3 ** 57 ** A3
PF , // PF 4 ** 58 ** A4
PF , // PF 5 ** 59 ** A5
PF , // PF 6 ** 60 ** A6
PF , // PF 7 ** 61 ** A7
PK , // PK 0 ** 62 ** A8
PK , // PK 1 ** 63 ** A9
PK , // PK 2 ** 64 ** A10
PK , // PK 3 ** 65 ** A11
PK , // PK 4 ** 66 ** A12
PK , // PK 5 ** 67 ** A13
PK , // PK 6 ** 68 ** A14
PK , // PK 7 ** 69 ** A15
PG , // PG 4 ** 70 **
PG , // PG 3 ** 71 **
PJ , // PJ 2 ** 72 **
PJ , // PJ 3 ** 73 **
PJ , // PJ 7 ** 74 **
PJ , // PJ 4 ** 75 **
PJ , // PJ 5 ** 76 **
PJ , // PJ 6 ** 77 **
PE , // PE 2 ** 78 **
PE , // PE 6 ** 79 **
PE , // PE 7 ** 80 **
PD , // PD 4 ** 81 **
PD , // PD 5 ** 82 **
PD , // PD 6 ** 83 **
PH , // PH 2 ** 84 **
PH , // PH 7 ** 85 **
};
#define digitalPinToPort_plus_70(P) ( pgm_read_byte( digital_pin_to_port_PGM_plus_70 + (P) ) )
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
// PIN IN PORT
// ------------------------
_BV( 0 ) , // PE 0 ** 0 ** USART0_RX
_BV( 1 ) , // PE 1 ** 1 ** USART0_TX
_BV( 4 ) , // PE 4 ** 2 ** PWM2
_BV( 5 ) , // PE 5 ** 3 ** PWM3
_BV( 5 ) , // PG 5 ** 4 ** PWM4
_BV( 3 ) , // PE 3 ** 5 ** PWM5
_BV( 3 ) , // PH 3 ** 6 ** PWM6
_BV( 4 ) , // PH 4 ** 7 ** PWM7
_BV( 5 ) , // PH 5 ** 8 ** PWM8
_BV( 6 ) , // PH 6 ** 9 ** PWM9
_BV( 4 ) , // PB 4 ** 10 ** PWM10
_BV( 5 ) , // PB 5 ** 11 ** PWM11
_BV( 6 ) , // PB 6 ** 12 ** PWM12
_BV( 7 ) , // PB 7 ** 13 ** PWM13
_BV( 1 ) , // PJ 1 ** 14 ** USART3_TX
_BV( 0 ) , // PJ 0 ** 15 ** USART3_RX
_BV( 1 ) , // PH 1 ** 16 ** USART2_TX
_BV( 0 ) , // PH 0 ** 17 ** USART2_RX
_BV( 3 ) , // PD 3 ** 18 ** USART1_TX
_BV( 2 ) , // PD 2 ** 19 ** USART1_RX
_BV( 1 ) , // PD 1 ** 20 ** I2C_SDA
_BV( 0 ) , // PD 0 ** 21 ** I2C_SCL
_BV( 0 ) , // PA 0 ** 22 ** D22
_BV( 1 ) , // PA 1 ** 23 ** D23
_BV( 2 ) , // PA 2 ** 24 ** D24
_BV( 3 ) , // PA 3 ** 25 ** D25
_BV( 4 ) , // PA 4 ** 26 ** D26
_BV( 5 ) , // PA 5 ** 27 ** D27
_BV( 6 ) , // PA 6 ** 28 ** D28
_BV( 7 ) , // PA 7 ** 29 ** D29
_BV( 7 ) , // PC 7 ** 30 ** D30
_BV( 6 ) , // PC 6 ** 31 ** D31
_BV( 5 ) , // PC 5 ** 32 ** D32
_BV( 4 ) , // PC 4 ** 33 ** D33
_BV( 3 ) , // PC 3 ** 34 ** D34
_BV( 2 ) , // PC 2 ** 35 ** D35
_BV( 1 ) , // PC 1 ** 36 ** D36
_BV( 0 ) , // PC 0 ** 37 ** D37
_BV( 7 ) , // PD 7 ** 38 ** D38
_BV( 2 ) , // PG 2 ** 39 ** D39
_BV( 1 ) , // PG 1 ** 40 ** D40
_BV( 0 ) , // PG 0 ** 41 ** D41
_BV( 7 ) , // PL 7 ** 42 ** D42
_BV( 6 ) , // PL 6 ** 43 ** D43
_BV( 5 ) , // PL 5 ** 44 ** D44
_BV( 4 ) , // PL 4 ** 45 ** D45
_BV( 3 ) , // PL 3 ** 46 ** D46
_BV( 2 ) , // PL 2 ** 47 ** D47
_BV( 1 ) , // PL 1 ** 48 ** D48
_BV( 0 ) , // PL 0 ** 49 ** D49
_BV( 3 ) , // PB 3 ** 50 ** SPI_MISO
_BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI
_BV( 1 ) , // PB 1 ** 52 ** SPI_SCK
_BV( 0 ) , // PB 0 ** 53 ** SPI_SS
_BV( 0 ) , // PF 0 ** 54 ** A0
_BV( 1 ) , // PF 1 ** 55 ** A1
_BV( 2 ) , // PF 2 ** 56 ** A2
_BV( 3 ) , // PF 3 ** 57 ** A3
_BV( 4 ) , // PF 4 ** 58 ** A4
_BV( 5 ) , // PF 5 ** 59 ** A5
_BV( 6 ) , // PF 6 ** 60 ** A6
_BV( 7 ) , // PF 7 ** 61 ** A7
_BV( 0 ) , // PK 0 ** 62 ** A8
_BV( 1 ) , // PK 1 ** 63 ** A9
_BV( 2 ) , // PK 2 ** 64 ** A10
_BV( 3 ) , // PK 3 ** 65 ** A11
_BV( 4 ) , // PK 4 ** 66 ** A12
_BV( 5 ) , // PK 5 ** 67 ** A13
_BV( 6 ) , // PK 6 ** 68 ** A14
_BV( 7 ) , // PK 7 ** 69 ** A15
_BV( 4 ) , // PG 4 ** 70 **
_BV( 3 ) , // PG 3 ** 71 **
_BV( 2 ) , // PJ 2 ** 72 **
_BV( 3 ) , // PJ 3 ** 73 **
_BV( 7 ) , // PJ 7 ** 74 **
_BV( 4 ) , // PJ 4 ** 75 **
_BV( 5 ) , // PJ 5 ** 76 **
_BV( 6 ) , // PJ 6 ** 77 **
_BV( 2 ) , // PE 2 ** 78 **
_BV( 6 ) , // PE 6 ** 79 **
_BV( 7 ) , // PE 7 ** 80 **
_BV( 4 ) , // PD 4 ** 81 **
_BV( 5 ) , // PD 5 ** 82 **
_BV( 6 ) , // PD 6 ** 83 **
_BV( 2 ) , // PH 2 ** 84 **
_BV( 7 ) , // PH 7 ** 85 **
};
#define digitalPinToBitMask_plus_70(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM_plus_70 + (P) ) )
const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = {
// TIMERS
// ------------------------
NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX
NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX
TIMER3B , // PE 4 ** 2 ** PWM2
TIMER3C , // PE 5 ** 3 ** PWM3
TIMER0B , // PG 5 ** 4 ** PWM4
TIMER3A , // PE 3 ** 5 ** PWM5
TIMER4A , // PH 3 ** 6 ** PWM6
TIMER4B , // PH 4 ** 7 ** PWM7
TIMER4C , // PH 5 ** 8 ** PWM8
TIMER2B , // PH 6 ** 9 ** PWM9
TIMER2A , // PB 4 ** 10 ** PWM10
TIMER1A , // PB 5 ** 11 ** PWM11
TIMER1B , // PB 6 ** 12 ** PWM12
TIMER0A , // PB 7 ** 13 ** PWM13
NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX
NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX
NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX
NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX
NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX
NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX
NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA
NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL
NOT_ON_TIMER , // PA 0 ** 22 ** D22
NOT_ON_TIMER , // PA 1 ** 23 ** D23
NOT_ON_TIMER , // PA 2 ** 24 ** D24
NOT_ON_TIMER , // PA 3 ** 25 ** D25
NOT_ON_TIMER , // PA 4 ** 26 ** D26
NOT_ON_TIMER , // PA 5 ** 27 ** D27
NOT_ON_TIMER , // PA 6 ** 28 ** D28
NOT_ON_TIMER , // PA 7 ** 29 ** D29
NOT_ON_TIMER , // PC 7 ** 30 ** D30
NOT_ON_TIMER , // PC 6 ** 31 ** D31
NOT_ON_TIMER , // PC 5 ** 32 ** D32
NOT_ON_TIMER , // PC 4 ** 33 ** D33
NOT_ON_TIMER , // PC 3 ** 34 ** D34
NOT_ON_TIMER , // PC 2 ** 35 ** D35
NOT_ON_TIMER , // PC 1 ** 36 ** D36
NOT_ON_TIMER , // PC 0 ** 37 ** D37
NOT_ON_TIMER , // PD 7 ** 38 ** D38
NOT_ON_TIMER , // PG 2 ** 39 ** D39
NOT_ON_TIMER , // PG 1 ** 40 ** D40
NOT_ON_TIMER , // PG 0 ** 41 ** D41
NOT_ON_TIMER , // PL 7 ** 42 ** D42
NOT_ON_TIMER , // PL 6 ** 43 ** D43
TIMER5C , // PL 5 ** 44 ** D44
TIMER5B , // PL 4 ** 45 ** D45
TIMER5A , // PL 3 ** 46 ** D46
NOT_ON_TIMER , // PL 2 ** 47 ** D47
NOT_ON_TIMER , // PL 1 ** 48 ** D48
NOT_ON_TIMER , // PL 0 ** 49 ** D49
NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO
NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI
NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK
NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS
NOT_ON_TIMER , // PF 0 ** 54 ** A0
NOT_ON_TIMER , // PF 1 ** 55 ** A1
NOT_ON_TIMER , // PF 2 ** 56 ** A2
NOT_ON_TIMER , // PF 3 ** 57 ** A3
NOT_ON_TIMER , // PF 4 ** 58 ** A4
NOT_ON_TIMER , // PF 5 ** 59 ** A5
NOT_ON_TIMER , // PF 6 ** 60 ** A6
NOT_ON_TIMER , // PF 7 ** 61 ** A7
NOT_ON_TIMER , // PK 0 ** 62 ** A8
NOT_ON_TIMER , // PK 1 ** 63 ** A9
NOT_ON_TIMER , // PK 2 ** 64 ** A10
NOT_ON_TIMER , // PK 3 ** 65 ** A11
NOT_ON_TIMER , // PK 4 ** 66 ** A12
NOT_ON_TIMER , // PK 5 ** 67 ** A13
NOT_ON_TIMER , // PK 6 ** 68 ** A14
NOT_ON_TIMER , // PK 7 ** 69 ** A15
NOT_ON_TIMER , // PG 4 ** 70 **
NOT_ON_TIMER , // PG 3 ** 71 **
NOT_ON_TIMER , // PJ 2 ** 72 **
NOT_ON_TIMER , // PJ 3 ** 73 **
NOT_ON_TIMER , // PJ 7 ** 74 **
NOT_ON_TIMER , // PJ 4 ** 75 **
NOT_ON_TIMER , // PJ 5 ** 76 **
NOT_ON_TIMER , // PJ 6 ** 77 **
NOT_ON_TIMER , // PE 2 ** 78 **
NOT_ON_TIMER , // PE 6 ** 79 **
};
#define digitalPinToTimer_plus_70(P) ( pgm_read_byte( digital_pin_to_timer_PGM_plus_70 + (P) ) )
/**
* Interrupts that are not implemented
*
* INT6 E6 79
* INT7 E7 80
* PCINT11 J2 72
* PCINT12 J3 73
* PCINT13 J4 75
* PCINT14 J5 76
* PCINT15 J6 77
*/
Marlin/src/HAL/AVR/spi_pins.h
+65
View File
@@ -0,0 +1,65 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Define SPI Pins: SCK, MISO, MOSI, SS
*/
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
#define AVR_SCK_PIN 13
#define AVR_MISO_PIN 12
#define AVR_MOSI_PIN 11
#define AVR_SS_PIN 10
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
#define AVR_SCK_PIN 7
#define AVR_MISO_PIN 6
#define AVR_MOSI_PIN 5
#define AVR_SS_PIN 4
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
#define AVR_SCK_PIN 52
#define AVR_MISO_PIN 50
#define AVR_MOSI_PIN 51
#define AVR_SS_PIN 53
#elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
#define AVR_SCK_PIN 21
#define AVR_MISO_PIN 23
#define AVR_MOSI_PIN 22
#define AVR_SS_PIN 20
#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
#define AVR_SCK_PIN 10
#define AVR_MISO_PIN 12
#define AVR_MOSI_PIN 11
#define AVR_SS_PIN 16
#endif
#ifndef SD_SCK_PIN
#define SD_SCK_PIN AVR_SCK_PIN
#endif
#ifndef SD_MISO_PIN
#define SD_MISO_PIN AVR_MISO_PIN
#endif
#ifndef SD_MOSI_PIN
#define SD_MOSI_PIN AVR_MOSI_PIN
#endif
#ifndef SD_SS_PIN
#define SD_SS_PIN AVR_SS_PIN
#endif
Marlin/src/HAL/AVR/timers.h
+260
View File
@@ -0,0 +1,260 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <stdint.h>
// ------------------------
// Types
// ------------------------
typedef uint16_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFF
// ------------------------
// Defines
// ------------------------
#define HAL_TIMER_RATE ((F_CPU) / 8) // i.e., 2MHz or 2.5MHz
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 1
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 0
#endif
#define TEMP_TIMER_FREQUENCY ((F_CPU) / 64.0 / 256.0)
#define STEPPER_TIMER_RATE HAL_TIMER_RATE
#define STEPPER_TIMER_PRESCALE 8
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
switch (timer_num) {
case STEP_TIMER_NUM:
// waveform generation = 0100 = CTC
SET_WGM(1, CTC_OCRnA);
// output mode = 00 (disconnected)
SET_COMA(1, NORMAL);
// Set the timer pre-scaler
// Generally we use a divider of 8, resulting in a 2MHz timer
// frequency on a 16MHz MCU. If you are going to change this, be
// sure to regenerate speed_lookuptable.h with
// create_speed_lookuptable.py
SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler
// Init Stepper ISR to 122 Hz for quick starting
// (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
OCR1A = 0x4000;
TCNT1 = 0;
break;
case TEMP_TIMER_NUM:
// Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt
OCR0B = 128;
break;
}
}
#define TIMER_OCR_1 OCR1A
#define TIMER_COUNTER_1 TCNT1
#define TIMER_OCR_0 OCR0A
#define TIMER_COUNTER_0 TCNT0
#define _CAT(a,V...) a##V
#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
/**
* On AVR there is no hardware prioritization and preemption of
* interrupts, so this emulates it. The UART has first priority
* (otherwise, characters will be lost due to UART overflow).
* Then: Stepper, Endstops, Temperature, and -finally- all others.
*/
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)
/* 18 cycles maximum latency */
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() \
extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER1_COMPA_vect() { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("push r16") /* 2 Save TIMSK0 into the stack */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("lds r16, %[timsk1]") /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
A("andi r16,~%[msk1]") /* 1 Disable the stepper ISR */ \
A("sts %[timsk1], r16") /* 2 And set the new value */ \
A("push r16") /* 2 Save TIMSK1 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
A("ori r16,%[msk1]") /* 1 Reenable the stepper ISR */ \
A("cli") /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
A("sts %[timsk1], r16") /* 2 And restore the old value - This reenables the stepper ISR */ \
A("pop r16") /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
A("sts %[timsk0], r16") /* 2 And restore the old value - This reenables the temperature ISR */ \
A("pop r16") /* 2 Get the old SREG value */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 value */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i" ((uint16_t)&TIMSK0), \
[timsk1] "i" ((uint16_t)&TIMSK1), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)),\
[msk1] "M" ((uint8_t)(1<<OCIE1A)) \
: \
); \
} \
void TIMER1_COMPA_vect_bottom()
#endif // HAL_STEP_TIMER_ISR
#ifndef HAL_TEMP_TIMER_ISR
/* 14 cycles maximum latency */
#define HAL_TEMP_TIMER_ISR() \
extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
extern "C" void TIMER0_COMPB_vect_bottom() asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
void TIMER0_COMPB_vect() { \
__asm__ __volatile__ ( \
A("push r16") /* 2 Save R16 */ \
A("in r16, __SREG__") /* 1 Get SREG */ \
A("push r16") /* 2 Save SREG into stack */ \
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
A("sts %[timsk0], r16") /* 2 And set the new value */ \
A("sei") /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */ \
A("push r16") /* 2 Save TIMSK0 into stack */ \
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
A("push r16") /* 2 Save RAMPZ into stack */ \
A("in r16, 0x3C") /* 1 Get EIND register */ \
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
A("push r1") \
A("push r18") \
A("push r19") \
A("push r20") \
A("push r21") \
A("push r22") \
A("push r23") \
A("push r24") \
A("push r25") \
A("push r26") \
A("push r27") \
A("push r30") \
A("push r31") \
A("clr r1") /* C runtime expects this register to be 0 */ \
A("call TIMER0_COMPB_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
A("pop r31") \
A("pop r30") \
A("pop r27") \
A("pop r26") \
A("pop r25") \
A("pop r24") \
A("pop r23") \
A("pop r22") \
A("pop r21") \
A("pop r20") \
A("pop r19") \
A("pop r18") \
A("pop r1") \
A("pop r0") \
A("out 0x3C, r16") /* 1 Restore EIND register */ \
A("pop r16") /* 2 Get the original RAMPZ register value */ \
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
A("pop r16") /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
A("ori r16,%[msk0]") /* 1 Enable temperature ISR */ \
A("cli") /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
A("sts %[timsk0], r16") /* 2 And restore the old value */ \
A("pop r16") /* 2 Get the old SREG */ \
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
A("pop r16") /* 2 Restore R16 */ \
A("reti") /* 4 Return from interrupt */ \
: \
: [timsk0] "i"((uint16_t)&TIMSK0), \
[msk0] "M" ((uint8_t)(1<<OCIE0B)) \
: \
); \
} \
void TIMER0_COMPB_vect_bottom()
#endif // HAL_TEMP_TIMER_ISR
Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp
+193
View File
@@ -0,0 +1,193 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_com_st7920_hw_spi.c
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2011, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#if defined(ARDUINO) && !defined(ARDUINO_ARCH_STM32) && !defined(ARDUINO_ARCH_SAM)
#include "../../inc/MarlinConfigPre.h"
#if HAS_MARLINUI_U8GLIB
#include "../shared/Marduino.h"
#include "../shared/Delay.h"
#include <U8glib.h>
uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
volatile uint8_t *u8g_outData, *u8g_outClock;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin) {
u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
u8g_outClock = portOutputRegister(digitalPinToPort(clockPin));
u8g_bitData = digitalPinToBitMask(dataPin);
u8g_bitClock = digitalPinToBitMask(clockPin);
u8g_bitNotClock = u8g_bitClock;
u8g_bitNotClock ^= 0xFF;
u8g_bitNotData = u8g_bitData;
u8g_bitNotData ^= 0xFF;
}
void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
uint8_t bitData = u8g_bitData,
bitNotData = u8g_bitNotData,
bitClock = u8g_bitClock,
bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData,
*outClock = u8g_outClock;
U8G_ATOMIC_START();
LOOP_L_N(i, 8) {
if (val & 0x80)
*outData |= bitData;
else
*outData &= bitNotData;
*outClock |= bitClock;
val <<= 1;
*outClock &= bitNotClock;
}
U8G_ATOMIC_END();
}
void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
uint8_t bitData = u8g_bitData,
bitNotData = u8g_bitNotData,
bitClock = u8g_bitClock,
bitNotClock = u8g_bitNotClock;
volatile uint8_t *outData = u8g_outData,
*outClock = u8g_outClock;
U8G_ATOMIC_START();
LOOP_L_N(i, 8) {
*outClock &= bitNotClock;
if (val & 0x80)
*outData |= bitData;
else
*outData &= bitNotData;
*outClock |= bitClock;
val <<= 1;
}
U8G_ATOMIC_END();
}
#if ENABLED(FYSETC_MINI_12864)
#define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
#else
#define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_0
#endif
uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch (msg) {
case U8G_COM_MSG_INIT:
u8g_com_arduino_init_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK]);
u8g_com_arduino_assign_pin_output_high(u8g);
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 0);
u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, 0);
break;
case U8G_COM_MSG_STOP:
break;
case U8G_COM_MSG_RESET:
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
break;
case U8G_COM_MSG_CHIP_SELECT:
#if ENABLED(FYSETC_MINI_12864) // LCD SPI is running mode 3 while SD card is running mode 0
if (arg_val) { // SCK idle state needs to be set to the proper idle state before
// the next chip select goes active
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 1); // Set SCK to mode 3 idle state before CS goes active
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
}
else {
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 0); // Set SCK to mode 0 idle state after CS goes inactive
}
#else
u8g_com_arduino_digital_write(u8g, U8G_PI_CS, !arg_val);
#endif
break;
case U8G_COM_MSG_WRITE_BYTE:
SPISEND_SW_AVR(arg_val);
break;
case U8G_COM_MSG_WRITE_SEQ: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
SPISEND_SW_AVR(*ptr++);
arg_val--;
}
}
break;
case U8G_COM_MSG_WRITE_SEQ_P: {
uint8_t *ptr = (uint8_t *)arg_ptr;
while (arg_val > 0) {
SPISEND_SW_AVR(u8g_pgm_read(ptr));
ptr++;
arg_val--;
}
}
break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
break;
}
return 1;
}
#endif // HAS_MARLINUI_U8GLIB
#endif // ARDUINO_ARCH_SAM
Marlin/src/HAL/AVR/watchdog.cpp
+70
View File
@@ -0,0 +1,70 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __AVR__
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog.h"
#include "../../MarlinCore.h"
// Initialize watchdog with 8s timeout, if possible. Otherwise, make it 4s.
void watchdog_init() {
#if ENABLED(WATCHDOG_DURATION_8S) && defined(WDTO_8S)
#define WDTO_NS WDTO_8S
#else
#define WDTO_NS WDTO_4S
#endif
#if ENABLED(WATCHDOG_RESET_MANUAL)
// Enable the watchdog timer, but only for the interrupt.
// Take care, as this requires the correct order of operation, with interrupts disabled.
// See the datasheet of any AVR chip for details.
wdt_reset();
cli();
_WD_CONTROL_REG = _BV(_WD_CHANGE_BIT) | _BV(WDE);
_WD_CONTROL_REG = _BV(WDIE) | (WDTO_NS & 0x07) | ((WDTO_NS & 0x08) << 2); // WDTO_NS directly does not work. bit 0-2 are consecutive in the register but the highest value bit is at bit 5
// So worked for up to WDTO_2S
sei();
wdt_reset();
#else
wdt_enable(WDTO_NS); // The function handles the upper bit correct.
#endif
//delay(10000); // test it!
}
//===========================================================================
//=================================== ISR ===================================
//===========================================================================
// Watchdog timer interrupt, called if main program blocks >4sec and manual reset is enabled.
#if ENABLED(WATCHDOG_RESET_MANUAL)
ISR(WDT_vect) {
sei(); // With the interrupt driven serial we need to allow interrupts.
SERIAL_ERROR_MSG(STR_WATCHDOG_FIRED);
minkill(); // interrupt-safe final kill and infinite loop
}
#endif
#endif // USE_WATCHDOG
#endif // __AVR__
Marlin/src/HAL/AVR/watchdog.h
+31
View File
@@ -0,0 +1,31 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <avr/wdt.h>
// Initialize watchdog with a 4 second interrupt time
void watchdog_init();
// Reset watchdog. MUST be called at least every 4 seconds after the
// first watchdog_init or AVR will go into emergency procedures.
inline void HAL_watchdog_refresh() { wdt_reset(); }
Marlin/src/HAL/ESP32/FlushableHardwareSerial.cpp
+29
View File
@@ -0,0 +1,29 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "FlushableHardwareSerial.h"
Serial1Class<FlushableHardwareSerial> flushableSerial(false, 0);
#endif
Marlin/src/HAL/ESP32/FlushableHardwareSerial.h
+34
View File
@@ -0,0 +1,34 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <HardwareSerial.h>
#include "../shared/Marduino.h"
#include "../../core/serial_hook.h"
class FlushableHardwareSerial : public HardwareSerial {
public:
FlushableHardwareSerial(int uart_nr) : HardwareSerial(uart_nr) {}
};
extern Serial1Class<FlushableHardwareSerial> flushableSerial;
Marlin/src/HAL/ESP32/HAL.cpp
+283
View File
@@ -0,0 +1,283 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#include <rom/rtc.h>
#include <driver/adc.h>
#include <esp_adc_cal.h>
#include <HardwareSerial.h>
#if ENABLED(WIFISUPPORT)
#include <ESPAsyncWebServer.h>
#include "wifi.h"
#if ENABLED(OTASUPPORT)
#include "ota.h"
#endif
#if ENABLED(WEBSUPPORT)
#include "spiffs.h"
#include "web.h"
#endif
#endif
#if ENABLED(ESP3D_WIFISUPPORT)
DefaultSerial1 MSerial0(false, Serial2Socket);
#endif
// ------------------------
// Externs
// ------------------------
portMUX_TYPE spinlock = portMUX_INITIALIZER_UNLOCKED;
// ------------------------
// Local defines
// ------------------------
#define V_REF 1100
// ------------------------
// Public Variables
// ------------------------
uint16_t HAL_adc_result;
// ------------------------
// Private Variables
// ------------------------
esp_adc_cal_characteristics_t characteristics[ADC_ATTEN_MAX];
adc_atten_t attenuations[ADC1_CHANNEL_MAX] = {};
uint32_t thresholds[ADC_ATTEN_MAX];
volatile int numPWMUsed = 0,
pwmPins[MAX_PWM_PINS],
pwmValues[MAX_PWM_PINS];
// ------------------------
// Public functions
// ------------------------
#if ENABLED(WIFI_CUSTOM_COMMAND)
bool wifi_custom_command(char * const command_ptr) {
#if ENABLED(ESP3D_WIFISUPPORT)
return esp3dlib.parse(command_ptr);
#else
UNUSED(command_ptr);
return false;
#endif
}
#endif
void HAL_init_board() {
#if ENABLED(ESP3D_WIFISUPPORT)
esp3dlib.init();
#elif ENABLED(WIFISUPPORT)
wifi_init();
TERN_(OTASUPPORT, OTA_init());
#if ENABLED(WEBSUPPORT)
spiffs_init();
web_init();
#endif
server.begin();
#endif
// ESP32 uses a GPIO matrix that allows pins to be assigned to hardware serial ports.
// The following code initializes hardware Serial1 and Serial2 to use user-defined pins
// if they have been defined.
#if defined(HARDWARE_SERIAL1_RX) && defined(HARDWARE_SERIAL1_TX)
HardwareSerial Serial1(1);
#ifdef TMC_BAUD_RATE // use TMC_BAUD_RATE for Serial1 if defined
Serial1.begin(TMC_BAUD_RATE, SERIAL_8N1, HARDWARE_SERIAL1_RX, HARDWARE_SERIAL1_TX);
#else // use default BAUDRATE if TMC_BAUD_RATE not defined
Serial1.begin(BAUDRATE, SERIAL_8N1, HARDWARE_SERIAL1_RX, HARDWARE_SERIAL1_TX);
#endif
#endif
#if defined(HARDWARE_SERIAL2_RX) && defined(HARDWARE_SERIAL2_TX)
HardwareSerial Serial2(2);
#ifdef TMC_BAUD_RATE // use TMC_BAUD_RATE for Serial1 if defined
Serial2.begin(TMC_BAUD_RATE, SERIAL_8N1, HARDWARE_SERIAL2_RX, HARDWARE_SERIAL2_TX);
#else // use default BAUDRATE if TMC_BAUD_RATE not defined
Serial2.begin(BAUDRATE, SERIAL_8N1, HARDWARE_SERIAL2_RX, HARDWARE_SERIAL2_TX);
#endif
#endif
// Initialize the i2s peripheral only if the I2S stepper stream is enabled.
// The following initialization is performed after Serial1 and Serial2 are defined as
// their native pins might conflict with the i2s stream even when they are remapped.
TERN_(I2S_STEPPER_STREAM, i2s_init());
}
void HAL_idletask() {
#if BOTH(WIFISUPPORT, OTASUPPORT)
OTA_handle();
#endif
TERN_(ESP3D_WIFISUPPORT, esp3dlib.idletask());
}
void HAL_clear_reset_source() { }
uint8_t HAL_get_reset_source() { return rtc_get_reset_reason(1); }
void HAL_reboot() { ESP.restart(); }
void _delay_ms(int delay_ms) { delay(delay_ms); }
// return free memory between end of heap (or end bss) and whatever is current
int freeMemory() { return ESP.getFreeHeap(); }
// ------------------------
// ADC
// ------------------------
#define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL
adc1_channel_t get_channel(int pin) {
switch (pin) {
case 39: return ADC1_CHANNEL(39);
case 36: return ADC1_CHANNEL(36);
case 35: return ADC1_CHANNEL(35);
case 34: return ADC1_CHANNEL(34);
case 33: return ADC1_CHANNEL(33);
case 32: return ADC1_CHANNEL(32);
}
return ADC1_CHANNEL_MAX;
}
void adc1_set_attenuation(adc1_channel_t chan, adc_atten_t atten) {
if (attenuations[chan] != atten) {
adc1_config_channel_atten(chan, atten);
attenuations[chan] = atten;
}
}
void HAL_adc_init() {
// Configure ADC
adc1_config_width(ADC_WIDTH_12Bit);
// Configure channels only if used as (re-)configuring a pin for ADC that is used elsewhere might have adverse effects
TERN_(HAS_TEMP_ADC_0, adc1_set_attenuation(get_channel(TEMP_0_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_1, adc1_set_attenuation(get_channel(TEMP_1_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_2, adc1_set_attenuation(get_channel(TEMP_2_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_3, adc1_set_attenuation(get_channel(TEMP_3_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_4, adc1_set_attenuation(get_channel(TEMP_4_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_5, adc1_set_attenuation(get_channel(TEMP_5_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_6, adc2_set_attenuation(get_channel(TEMP_6_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db));
TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_COOLER, adc1_set_attenuation(get_channel(TEMP_COOLER_PIN), ADC_ATTEN_11db));
TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db));
// Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.
// That's why we're not setting it up here.
// Calculate ADC characteristics (i.e., gain and offset factors for each attenuation level)
for (int i = 0; i < ADC_ATTEN_MAX; i++) {
esp_adc_cal_characterize(ADC_UNIT_1, (adc_atten_t)i, ADC_WIDTH_BIT_12, V_REF, &characteristics[i]);
// Change attenuation 100mV below the calibrated threshold
thresholds[i] = esp_adc_cal_raw_to_voltage(4095, &characteristics[i]);
}
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
const adc1_channel_t chan = get_channel(adc_pin);
uint32_t mv;
esp_adc_cal_get_voltage((adc_channel_t)chan, &characteristics[attenuations[chan]], &mv);
HAL_adc_result = mv * 1023.0 / 3300.0;
// Change the attenuation level based on the new reading
adc_atten_t atten;
if (mv < thresholds[ADC_ATTEN_DB_0] - 100)
atten = ADC_ATTEN_DB_0;
else if (mv > thresholds[ADC_ATTEN_DB_0] - 50 && mv < thresholds[ADC_ATTEN_DB_2_5] - 100)
atten = ADC_ATTEN_DB_2_5;
else if (mv > thresholds[ADC_ATTEN_DB_2_5] - 50 && mv < thresholds[ADC_ATTEN_DB_6] - 100)
atten = ADC_ATTEN_DB_6;
else if (mv > thresholds[ADC_ATTEN_DB_6] - 50)
atten = ADC_ATTEN_DB_11;
else return;
adc1_set_attenuation(chan, atten);
}
void analogWrite(pin_t pin, int value) {
// Use ledc hardware for internal pins
if (pin < 34) {
static int cnt_channel = 1, pin_to_channel[40] = { 0 };
if (pin_to_channel[pin] == 0) {
ledcAttachPin(pin, cnt_channel);
ledcSetup(cnt_channel, 490, 8);
ledcWrite(cnt_channel, value);
pin_to_channel[pin] = cnt_channel++;
}
ledcWrite(pin_to_channel[pin], value);
return;
}
int idx = -1;
// Search Pin
for (int i = 0; i < numPWMUsed; ++i)
if (pwmPins[i] == pin) { idx = i; break; }
// not found ?
if (idx < 0) {
// No slots remaining
if (numPWMUsed >= MAX_PWM_PINS) return;
// Take new slot for pin
idx = numPWMUsed;
pwmPins[idx] = pin;
// Start timer on first use
if (idx == 0) HAL_timer_start(PWM_TIMER_NUM, PWM_TIMER_FREQUENCY);
++numPWMUsed;
}
// Use 7bit internal value - add 1 to have 100% high at 255
pwmValues[idx] = (value + 1) / 2;
}
// Handle PWM timer interrupt
HAL_PWM_TIMER_ISR() {
HAL_timer_isr_prologue(PWM_TIMER_NUM);
static uint8_t count = 0;
for (int i = 0; i < numPWMUsed; ++i) {
if (count == 0) // Start of interval
WRITE(pwmPins[i], pwmValues[i] ? HIGH : LOW);
else if (pwmValues[i] == count) // End of duration
WRITE(pwmPins[i], LOW);
}
// 128 for 7 Bit resolution
count = (count + 1) & 0x7F;
HAL_timer_isr_epilogue(PWM_TIMER_NUM);
}
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/HAL.h
+184
View File
@@ -0,0 +1,184 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* HAL for Espressif ESP32 WiFi
*/
#define CPU_32_BIT
#include <stdint.h>
#include "../shared/Marduino.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include "i2s.h"
#if ENABLED(WIFISUPPORT)
#include "WebSocketSerial.h"
#endif
#if ENABLED(ESP3D_WIFISUPPORT)
#include "esp3dlib.h"
#endif
#include "FlushableHardwareSerial.h"
// ------------------------
// Defines
// ------------------------
extern portMUX_TYPE spinlock;
#define MYSERIAL1 flushableSerial
#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
#if ENABLED(ESP3D_WIFISUPPORT)
typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#define MYSERIAL2 MSerial0
#else
#define MYSERIAL2 webSocketSerial
#endif
#endif
#define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)
#define CRITICAL_SECTION_END() portEXIT_CRITICAL(&spinlock)
#define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL)
#define ENABLE_ISRS() if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
#define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
// ------------------------
// Types
// ------------------------
typedef int16_t pin_t;
#define HAL_SERVO_LIB Servo
// ------------------------
// Public Variables
// ------------------------
/** result of last ADC conversion */
extern uint16_t HAL_adc_result;
// ------------------------
// Public functions
// ------------------------
//
// Tone
//
void toneInit();
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
void noTone(const pin_t _pin);
// clear reset reason
void HAL_clear_reset_source();
// reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
void _delay_ms(int delay);
#if GCC_VERSION <= 50000
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
int freeMemory();
#if GCC_VERSION <= 50000
#pragma GCC diagnostic pop
#endif
void analogWrite(pin_t pin, int value);
// ADC
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_init();
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t adc_pin);
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
// Enable hooks into idle and setup for HAL
#define HAL_IDLETASK 1
#define BOARD_INIT() HAL_init_board();
void HAL_idletask();
inline void HAL_init() {}
void HAL_init_board();
//
// Delay in cycles (used by DELAY_NS / DELAY_US)
//
FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {
unsigned long start, ccount, stop;
/**
* It's important to care for race conditions (and overflows) here.
* Race condition example: If `stop` calculates to being close to the upper boundary of
* `uint32_t` and if at the same time a longer loop interruption kicks in (e.g. due to other
* FreeRTOS tasks or interrupts), `ccount` might overflow (and therefore be below `stop` again)
* without the loop ever being able to notice that `ccount` had already been above `stop` once
* (and that therefore the number of cycles to delay has already passed).
* As DELAY_CYCLES (through DELAY_NS / DELAY_US) is used by software SPI bit banging to drive
* LCDs and therefore might be called very, very often, this seemingly improbable situation did
* actually happen in reality. It resulted in apparently random print pauses of ~17.9 seconds
* (0x100000000 / 240 MHz) or multiples thereof, essentially ruining the current print by causing
* large blobs of filament.
*/
__asm__ __volatile__ ( "rsr %0, ccount" : "=a" (start) );
stop = start + x;
ccount = start;
if (stop >= start) {
// no overflow, so only loop while in between start and stop:
// 0x00000000 -----------------start****stop-- 0xFFFFFFFF
while (ccount >= start && ccount < stop) {
__asm__ __volatile__ ( "rsr %0, ccount" : "=a" (ccount) );
}
}
else {
// stop did overflow, so only loop while outside of stop and start:
// 0x00000000 **stop-------------------start** 0xFFFFFFFF
while (ccount >= start || ccount < stop) {
__asm__ __volatile__ ( "rsr %0, ccount" : "=a" (ccount) );
}
}
}
Marlin/src/HAL/ESP32/HAL_SPI.cpp
+115
View File
@@ -0,0 +1,115 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#include "../shared/HAL_SPI.h"
#include <pins_arduino.h>
#include <SPI.h>
// ------------------------
// Public Variables
// ------------------------
static SPISettings spiConfig;
// ------------------------
// Public functions
// ------------------------
#if ENABLED(SOFTWARE_SPI)
// ------------------------
// Software SPI
// ------------------------
#error "Software SPI not supported for ESP32. Use Hardware SPI."
#else
// ------------------------
// Hardware SPI
// ------------------------
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
}
void spiInit(uint8_t spiRate) {
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 16000000; break;
case SPI_HALF_SPEED: clock = 8000000; break;
case SPI_QUARTER_SPEED: clock = 4000000; break;
case SPI_EIGHTH_SPEED: clock = 2000000; break;
case SPI_SIXTEENTH_SPEED: clock = 1000000; break;
case SPI_SPEED_5: clock = 500000; break;
case SPI_SPEED_6: clock = 250000; break;
default: clock = 1000000; // Default from the SPI library
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
SPI.begin();
}
uint8_t spiRec() {
SPI.beginTransaction(spiConfig);
uint8_t returnByte = SPI.transfer(0xFF);
SPI.endTransaction();
return returnByte;
}
void spiRead(uint8_t *buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transferBytes(0, buf, nbyte);
SPI.endTransaction();
}
void spiSend(uint8_t b) {
SPI.beginTransaction(spiConfig);
SPI.transfer(b);
SPI.endTransaction();
}
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI.beginTransaction(spiConfig);
SPI.transfer(token);
SPI.writeBytes(const_cast<uint8_t*>(buf), 512);
SPI.endTransaction();
}
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, bitOrder, dataMode);
SPI.beginTransaction(spiConfig);
}
#endif // !SOFTWARE_SPI
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/Servo.cpp
+69
View File
@@ -0,0 +1,69 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "Servo.h"
// Adjacent channels (0/1, 2/3 etc.) share the same timer and therefore the same frequency and resolution settings on ESP32,
// so we only allocate servo channels up high to avoid side effects with regards to analogWrite (fans, leds, laser pwm etc.)
int Servo::channel_next_free = 12;
Servo::Servo() {
channel = channel_next_free++;
}
int8_t Servo::attach(const int inPin) {
if (channel >= CHANNEL_MAX_NUM) return -1;
if (inPin > 0) pin = inPin;
ledcSetup(channel, 50, 16); // channel X, 50 Hz, 16-bit depth
ledcAttachPin(pin, channel);
return true;
}
void Servo::detach() { ledcDetachPin(pin); }
int Servo::read() { return degrees; }
void Servo::write(int inDegrees) {
degrees = constrain(inDegrees, MIN_ANGLE, MAX_ANGLE);
int us = map(degrees, MIN_ANGLE, MAX_ANGLE, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH);
int duty = map(us, 0, TAU_USEC, 0, MAX_COMPARE);
ledcWrite(channel, duty);
}
void Servo::move(const int value) {
constexpr uint16_t servo_delay[] = SERVO_DELAY;
static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
if (attach(0) >= 0) {
write(value);
safe_delay(servo_delay[channel]);
TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
}
}
#endif // HAS_SERVOS
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/Servo.h
+49
View File
@@ -0,0 +1,49 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <Arduino.h>
class Servo {
static const int MIN_ANGLE = 0,
MAX_ANGLE = 180,
MIN_PULSE_WIDTH = 544, // Shortest pulse sent to a servo
MAX_PULSE_WIDTH = 2400, // Longest pulse sent to a servo
TAU_MSEC = 20,
TAU_USEC = (TAU_MSEC * 1000),
MAX_COMPARE = _BV(16) - 1, // 65535
CHANNEL_MAX_NUM = 16;
public:
Servo();
int8_t attach(const int pin); // attach the given pin to the next free channel, set pinMode, return channel number (-1 on fail)
void detach();
void write(int degrees); // set angle
void move(const int degrees); // attach the servo, then move to value
int read(); // returns current pulse width as an angle between 0 and 180 degrees
private:
static int channel_next_free;
int channel;
int pin;
int degrees;
};
Marlin/src/HAL/ESP32/Tone.cpp
+59
View File
@@ -0,0 +1,59 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* Copypaste of SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Description: Tone function for ESP32
* Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#include "HAL.h"
static pin_t tone_pin;
volatile static int32_t toggles;
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) {
tone_pin = _pin;
toggles = 2 * frequency * duration / 1000;
HAL_timer_start(TONE_TIMER_NUM, 2 * frequency);
}
void noTone(const pin_t _pin) {
HAL_timer_disable_interrupt(TONE_TIMER_NUM);
WRITE(_pin, LOW);
}
HAL_TONE_TIMER_ISR() {
HAL_timer_isr_prologue(TONE_TIMER_NUM);
if (toggles) {
toggles--;
TOGGLE(tone_pin);
}
else noTone(tone_pin); // turn off interrupt
}
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/WebSocketSerial.cpp
+148
View File
@@ -0,0 +1,148 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT)
#include "WebSocketSerial.h"
#include "wifi.h"
#include <ESPAsyncWebServer.h>
MSerialWebSocketT webSocketSerial(false);
AsyncWebSocket ws("/ws"); // TODO Move inside the class.
// RingBuffer impl
#define NEXT_INDEX(I, SIZE) ((I + 1) & (ring_buffer_pos_t)(SIZE - 1))
RingBuffer::RingBuffer(ring_buffer_pos_t size)
: data(new uint8_t[size]),
size(size),
read_index(0),
write_index(0)
{}
RingBuffer::~RingBuffer() { delete[] data; }
ring_buffer_pos_t RingBuffer::write(const uint8_t c) {
const ring_buffer_pos_t n = NEXT_INDEX(write_index, size);
if (n != read_index) {
this->data[write_index] = c;
write_index = n;
return 1;
}
// TODO: buffer is full, handle?
return 0;
}
ring_buffer_pos_t RingBuffer::write(const uint8_t *buffer, ring_buffer_pos_t size) {
ring_buffer_pos_t written = 0;
for (ring_buffer_pos_t i = 0; i < size; i++) {
written += write(buffer[i]);
}
return written;
}
int RingBuffer::available() {
return (size - read_index + write_index) & (size - 1);
}
int RingBuffer::peek() {
return available() ? data[read_index] : -1;
}
int RingBuffer::read() {
if (available()) {
const int ret = data[read_index];
read_index = NEXT_INDEX(read_index, size);
return ret;
}
return -1;
}
ring_buffer_pos_t RingBuffer::read(uint8_t *buffer) {
ring_buffer_pos_t len = available();
for (ring_buffer_pos_t i = 0; read_index != write_index; i++) {
buffer[i] = data[read_index];
read_index = NEXT_INDEX(read_index, size);
}
return len;
}
void RingBuffer::flush() { read_index = write_index; }
// WebSocketSerial impl
WebSocketSerial::WebSocketSerial()
: rx_buffer(RingBuffer(RX_BUFFER_SIZE)),
tx_buffer(RingBuffer(TX_BUFFER_SIZE))
{}
void WebSocketSerial::begin(const long baud_setting) {
ws.onEvent([this](AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
switch (type) {
case WS_EVT_CONNECT: client->ping(); break; // client connected
case WS_EVT_DISCONNECT: // client disconnected
case WS_EVT_ERROR: // error was received from the other end
case WS_EVT_PONG: break; // pong message was received (in response to a ping request maybe)
case WS_EVT_DATA: { // data packet
AwsFrameInfo * info = (AwsFrameInfo*)arg;
if (info->opcode == WS_TEXT || info->message_opcode == WS_TEXT)
this->rx_buffer.write(data, len);
}
}
});
server.addHandler(&ws);
}
void WebSocketSerial::end() { }
int WebSocketSerial::peek() { return rx_buffer.peek(); }
int WebSocketSerial::read() { return rx_buffer.read(); }
int WebSocketSerial::available() { return rx_buffer.available(); }
void WebSocketSerial::flush() { rx_buffer.flush(); }
size_t WebSocketSerial::write(const uint8_t c) {
size_t ret = tx_buffer.write(c);
if (ret && c == '\n') {
uint8_t tmp[TX_BUFFER_SIZE];
ring_buffer_pos_t size = tx_buffer.read(tmp);
ws.textAll(tmp, size);
}
return ret;
}
size_t WebSocketSerial::write(const uint8_t *buffer, size_t size) {
size_t written = 0;
for (size_t i = 0; i < size; i++)
written += write(buffer[i]);
return written;
}
#endif // WIFISUPPORT
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/WebSocketSerial.h
+85
View File
@@ -0,0 +1,85 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../inc/MarlinConfig.h"
#include "../../core/serial_hook.h"
#include <Stream.h>
#ifndef TX_BUFFER_SIZE
#define TX_BUFFER_SIZE 32
#endif
#if ENABLED(WIFISUPPORT)
#ifndef RX_BUFFER_SIZE
#define RX_BUFFER_SIZE 128
#endif
#if TX_BUFFER_SIZE <= 0
#error "TX_BUFFER_SIZE is required for the WebSocket."
#endif
#endif
typedef uint16_t ring_buffer_pos_t;
class RingBuffer {
uint8_t *data;
ring_buffer_pos_t size, read_index, write_index;
public:
RingBuffer(ring_buffer_pos_t size);
~RingBuffer();
int available();
int peek();
int read();
ring_buffer_pos_t read(uint8_t *buffer);
void flush();
ring_buffer_pos_t write(const uint8_t c);
ring_buffer_pos_t write(const uint8_t *buffer, ring_buffer_pos_t size);
};
class WebSocketSerial: public Stream {
RingBuffer rx_buffer;
RingBuffer tx_buffer;
public:
WebSocketSerial();
void begin(const long);
void end();
int available();
int peek();
int read();
void flush();
size_t write(const uint8_t c);
size_t write(const uint8_t *buffer, size_t size);
#if ENABLED(SERIAL_STATS_DROPPED_RX)
FORCE_INLINE uint32_t dropped() { return 0; }
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
FORCE_INLINE int rxMaxEnqueued() { return 0; }
#endif
};
typedef Serial1Class<WebSocketSerial> MSerialWebSocketT;
extern MSerialWebSocketT webSocketSerial;
Marlin/src/HAL/ESP32/eeprom.cpp
+57
View File
@@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#if ENABLED(EEPROM_SETTINGS)
#include "../shared/eeprom_api.h"
#include <EEPROM.h>
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { return EEPROM.begin(MARLIN_EEPROM_SIZE); }
bool PersistentStore::access_finish() { EEPROM.end(); return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
for (size_t i = 0; i < size; i++) {
EEPROM.write(pos++, value[i]);
crc16(crc, &value[i], 1);
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
for (size_t i = 0; i < size; i++) {
uint8_t c = EEPROM.read(pos++);
if (writing) value[i] = c;
crc16(crc, &c, 1);
}
return false;
}
#endif // EEPROM_SETTINGS
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/endstop_interrupts.h
+62
View File
@@ -0,0 +1,62 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the stepper-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate an 'external interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#include "../../module/endstops.h"
// One ISR for all EXT-Interrupts
void ICACHE_RAM_ATTR endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
}
Marlin/src/HAL/ESP32/fastio.h
+87
View File
@@ -0,0 +1,87 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "i2s.h"
/**
* Utility functions
*/
// I2S expander pin mapping.
#define IS_I2S_EXPANDER_PIN(IO) TEST(IO, 7)
#define I2S_EXPANDER_PIN_INDEX(IO) (IO & 0x7F)
// Set pin as input
#define _SET_INPUT(IO) pinMode(IO, INPUT)
// Set pin as output
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT)
// Set pin as input with pullup mode
#define _PULLUP(IO, v) pinMode(IO, v ? INPUT_PULLUP : INPUT)
// Read a pin wrapper
#define READ(IO) (IS_I2S_EXPANDER_PIN(IO) ? i2s_state(I2S_EXPANDER_PIN_INDEX(IO)) : digitalRead(IO))
// Write to a pin wrapper
#define WRITE(IO, v) (IS_I2S_EXPANDER_PIN(IO) ? i2s_write(I2S_EXPANDER_PIN_INDEX(IO), v) : digitalWrite(IO, v))
// Set pin as input wrapper
#define SET_INPUT(IO) _SET_INPUT(IO)
// Set pin as input with pullup wrapper
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
// Set pin as input with pulldown (substitution)
#define SET_INPUT_PULLDOWN SET_INPUT
// Set pin as output wrapper
#define SET_OUTPUT(IO) do{ _SET_OUTPUT(IO); }while(0)
// Set pin as PWM
#define SET_PWM SET_OUTPUT
// Set pin as output and init
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
// PWM outputs
#define PWM_PIN(P) (P < 34 || P > 127) // NOTE Pins >= 34 are input only on ESP32, so they can't be used for output.
// Toggle pin value
#define TOGGLE(IO) WRITE(IO, !READ(IO))
//
// Ports and functions
//
// UART
#define RXD 3
#define TXD 1
// TWI (I2C)
#define SCL 5
#define SDA 4
Marlin/src/HAL/ESP32/i2s.cpp
+343
View File
@@ -0,0 +1,343 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#include "i2s.h"
#include "../shared/Marduino.h"
#include <driver/periph_ctrl.h>
#include <rom/lldesc.h>
#include <soc/i2s_struct.h>
#include <freertos/queue.h>
#include "../../module/stepper.h"
#define DMA_BUF_COUNT 8 // number of DMA buffers to store data
#define DMA_BUF_LEN 4092 // maximum size in bytes
#define I2S_SAMPLE_SIZE 4 // 4 bytes, 32 bits per sample
#define DMA_SAMPLE_COUNT DMA_BUF_LEN / I2S_SAMPLE_SIZE // number of samples per buffer
typedef enum {
I2S_NUM_0 = 0x0, /*!< I2S 0*/
I2S_NUM_1 = 0x1, /*!< I2S 1*/
I2S_NUM_MAX,
} i2s_port_t;
typedef struct {
uint32_t **buffers;
uint32_t *current;
uint32_t rw_pos;
lldesc_t **desc;
xQueueHandle queue;
} i2s_dma_t;
static portMUX_TYPE i2s_spinlock[I2S_NUM_MAX] = {portMUX_INITIALIZER_UNLOCKED, portMUX_INITIALIZER_UNLOCKED};
static i2s_dev_t* I2S[I2S_NUM_MAX] = {&I2S0, &I2S1};
static i2s_dma_t dma;
// output value
uint32_t i2s_port_data = 0;
#define I2S_ENTER_CRITICAL() portENTER_CRITICAL(&i2s_spinlock[i2s_num])
#define I2S_EXIT_CRITICAL() portEXIT_CRITICAL(&i2s_spinlock[i2s_num])
static inline void gpio_matrix_out_check(uint32_t gpio, uint32_t signal_idx, bool out_inv, bool oen_inv) {
//if pin = -1, do not need to configure
if (gpio != -1) {
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio], PIN_FUNC_GPIO);
gpio_set_direction((gpio_num_t)gpio, (gpio_mode_t)GPIO_MODE_DEF_OUTPUT);
gpio_matrix_out(gpio, signal_idx, out_inv, oen_inv);
}
}
static esp_err_t i2s_reset_fifo(i2s_port_t i2s_num) {
I2S_ENTER_CRITICAL();
I2S[i2s_num]->conf.rx_fifo_reset = 1;
I2S[i2s_num]->conf.rx_fifo_reset = 0;
I2S[i2s_num]->conf.tx_fifo_reset = 1;
I2S[i2s_num]->conf.tx_fifo_reset = 0;
I2S_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t i2s_start(i2s_port_t i2s_num) {
//start DMA link
I2S_ENTER_CRITICAL();
i2s_reset_fifo(i2s_num);
//reset dma
I2S[i2s_num]->lc_conf.in_rst = 1;
I2S[i2s_num]->lc_conf.in_rst = 0;
I2S[i2s_num]->lc_conf.out_rst = 1;
I2S[i2s_num]->lc_conf.out_rst = 0;
I2S[i2s_num]->conf.tx_reset = 1;
I2S[i2s_num]->conf.tx_reset = 0;
I2S[i2s_num]->conf.rx_reset = 1;
I2S[i2s_num]->conf.rx_reset = 0;
I2S[i2s_num]->int_clr.val = 0xFFFFFFFF;
I2S[i2s_num]->out_link.start = 1;
I2S[i2s_num]->conf.tx_start = 1;
I2S_EXIT_CRITICAL();
return ESP_OK;
}
esp_err_t i2s_stop(i2s_port_t i2s_num) {
I2S_ENTER_CRITICAL();
I2S[i2s_num]->out_link.stop = 1;
I2S[i2s_num]->conf.tx_start = 0;
I2S[i2s_num]->int_clr.val = I2S[i2s_num]->int_st.val; //clear pending interrupt
I2S_EXIT_CRITICAL();
return ESP_OK;
}
static void IRAM_ATTR i2s_intr_handler_default(void *arg) {
int dummy;
lldesc_t *finish_desc;
portBASE_TYPE high_priority_task_awoken = pdFALSE;
if (I2S0.int_st.out_eof) {
// Get the descriptor of the last item in the linkedlist
finish_desc = (lldesc_t*) I2S0.out_eof_des_addr;
// If the queue is full it's because we have an underflow,
// more than buf_count isr without new data, remove the front buffer
if (xQueueIsQueueFullFromISR(dma.queue))
xQueueReceiveFromISR(dma.queue, &dummy, &high_priority_task_awoken);
xQueueSendFromISR(dma.queue, (void *)(&finish_desc->buf), &high_priority_task_awoken);
}
if (high_priority_task_awoken == pdTRUE) portYIELD_FROM_ISR();
// clear interrupt
I2S0.int_clr.val = I2S0.int_st.val; //clear pending interrupt
}
void stepperTask(void *parameter) {
uint32_t remaining = 0;
while (1) {
xQueueReceive(dma.queue, &dma.current, portMAX_DELAY);
dma.rw_pos = 0;
while (dma.rw_pos < DMA_SAMPLE_COUNT) {
// Fill with the port data post pulse_phase until the next step
if (remaining) {
i2s_push_sample();
remaining--;
}
else {
Stepper::pulse_phase_isr();
remaining = Stepper::block_phase_isr();
}
}
}
}
int i2s_init() {
periph_module_enable(PERIPH_I2S0_MODULE);
/**
* Each i2s transfer will take
* fpll = PLL_D2_CLK -- clka_en = 0
*
* fi2s = fpll / N + b/a -- N = clkm_div_num
* fi2s = 160MHz / 2
* fi2s = 80MHz
*
* fbclk = fi2s / M -- M = tx_bck_div_num
* fbclk = 80MHz / 2
* fbclk = 40MHz
*
* fwclk = fbclk / 32
*
* for fwclk = 250kHz (4µS pulse time)
* N = 10
* M = 20
*/
// Allocate the array of pointers to the buffers
dma.buffers = (uint32_t **)malloc(sizeof(uint32_t*) * DMA_BUF_COUNT);
if (!dma.buffers) return -1;
// Allocate each buffer that can be used by the DMA controller
for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {
dma.buffers[buf_idx] = (uint32_t*) heap_caps_calloc(1, DMA_BUF_LEN, MALLOC_CAP_DMA);
if (dma.buffers[buf_idx] == nullptr) return -1;
}
// Allocate the array of DMA descriptors
dma.desc = (lldesc_t**) malloc(sizeof(lldesc_t*) * DMA_BUF_COUNT);
if (!dma.desc) return -1;
// Allocate each DMA descriptor that will be used by the DMA controller
for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {
dma.desc[buf_idx] = (lldesc_t*) heap_caps_malloc(sizeof(lldesc_t), MALLOC_CAP_DMA);
if (dma.desc[buf_idx] == nullptr) return -1;
}
// Initialize
for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {
dma.desc[buf_idx]->owner = 1;
dma.desc[buf_idx]->eof = 1; // set to 1 will trigger the interrupt
dma.desc[buf_idx]->sosf = 0;
dma.desc[buf_idx]->length = DMA_BUF_LEN;
dma.desc[buf_idx]->size = DMA_BUF_LEN;
dma.desc[buf_idx]->buf = (uint8_t *) dma.buffers[buf_idx];
dma.desc[buf_idx]->offset = 0;
dma.desc[buf_idx]->empty = (uint32_t)((buf_idx < (DMA_BUF_COUNT - 1)) ? (dma.desc[buf_idx + 1]) : dma.desc[0]);
}
dma.queue = xQueueCreate(DMA_BUF_COUNT, sizeof(uint32_t *));
// Set the first DMA descriptor
I2S0.out_link.addr = (uint32_t)dma.desc[0];
// stop i2s
i2s_stop(I2S_NUM_0);
// configure I2S data port interface.
i2s_reset_fifo(I2S_NUM_0);
//reset i2s
I2S0.conf.tx_reset = 1;
I2S0.conf.tx_reset = 0;
I2S0.conf.rx_reset = 1;
I2S0.conf.rx_reset = 0;
//reset dma
I2S0.lc_conf.in_rst = 1;
I2S0.lc_conf.in_rst = 0;
I2S0.lc_conf.out_rst = 1;
I2S0.lc_conf.out_rst = 0;
//Enable and configure DMA
I2S0.lc_conf.check_owner = 0;
I2S0.lc_conf.out_loop_test = 0;
I2S0.lc_conf.out_auto_wrback = 0;
I2S0.lc_conf.out_data_burst_en = 0;
I2S0.lc_conf.outdscr_burst_en = 0;
I2S0.lc_conf.out_no_restart_clr = 0;
I2S0.lc_conf.indscr_burst_en = 0;
I2S0.lc_conf.out_eof_mode = 1;
I2S0.conf2.lcd_en = 0;
I2S0.conf2.camera_en = 0;
I2S0.pdm_conf.pcm2pdm_conv_en = 0;
I2S0.pdm_conf.pdm2pcm_conv_en = 0;
I2S0.fifo_conf.dscr_en = 0;
I2S0.conf_chan.tx_chan_mod = (
#if ENABLED(I2S_STEPPER_SPLIT_STREAM)
4
#else
0
#endif
);
I2S0.fifo_conf.tx_fifo_mod = 0;
I2S0.conf.tx_mono = 0;
I2S0.conf_chan.rx_chan_mod = 0;
I2S0.fifo_conf.rx_fifo_mod = 0;
I2S0.conf.rx_mono = 0;
I2S0.fifo_conf.dscr_en = 1; //connect dma to fifo
I2S0.conf.tx_start = 0;
I2S0.conf.rx_start = 0;
I2S0.conf.tx_msb_right = 1;
I2S0.conf.tx_right_first = 1;
I2S0.conf.tx_slave_mod = 0; // Master
I2S0.fifo_conf.tx_fifo_mod_force_en = 1;
I2S0.pdm_conf.rx_pdm_en = 0;
I2S0.pdm_conf.tx_pdm_en = 0;
I2S0.conf.tx_short_sync = 0;
I2S0.conf.rx_short_sync = 0;
I2S0.conf.tx_msb_shift = 0;
I2S0.conf.rx_msb_shift = 0;
// set clock
I2S0.clkm_conf.clka_en = 0; // Use PLL/2 as reference
I2S0.clkm_conf.clkm_div_num = 10; // minimum value of 2, reset value of 4, max 256
I2S0.clkm_conf.clkm_div_a = 0; // 0 at reset, what about divide by 0? (not an issue)
I2S0.clkm_conf.clkm_div_b = 0; // 0 at reset
// fbck = fi2s / tx_bck_div_num
I2S0.sample_rate_conf.tx_bck_div_num = 2; // minimum value of 2 defaults to 6
// Enable TX interrupts
I2S0.int_ena.out_eof = 1;
I2S0.int_ena.out_dscr_err = 0;
I2S0.int_ena.out_total_eof = 0;
I2S0.int_ena.out_done = 0;
// Allocate and Enable the I2S interrupt
intr_handle_t i2s_isr_handle;
esp_intr_alloc(ETS_I2S0_INTR_SOURCE, 0, i2s_intr_handler_default, nullptr, &i2s_isr_handle);
esp_intr_enable(i2s_isr_handle);
// Create the task that will feed the buffer
xTaskCreatePinnedToCore(stepperTask, "StepperTask", 10000, nullptr, 1, nullptr, CONFIG_ARDUINO_RUNNING_CORE); // run I2S stepper task on same core as rest of Marlin
// Route the i2s pins to the appropriate GPIO
gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
gpio_matrix_out_check(I2S_BCK, I2S0O_BCK_OUT_IDX, 0, 0);
gpio_matrix_out_check(I2S_WS, I2S0O_WS_OUT_IDX, 0, 0);
// Start the I2S peripheral
return i2s_start(I2S_NUM_0);
}
void i2s_write(uint8_t pin, uint8_t val) {
#if ENABLED(I2S_STEPPER_SPLIT_STREAM)
if (pin >= 16) {
SET_BIT_TO(I2S0.conf_single_data, pin, val);
return;
}
#endif
SET_BIT_TO(i2s_port_data, pin, val);
}
uint8_t i2s_state(uint8_t pin) {
#if ENABLED(I2S_STEPPER_SPLIT_STREAM)
if (pin >= 16) return TEST(I2S0.conf_single_data, pin);
#endif
return TEST(i2s_port_data, pin);
}
void i2s_push_sample() {
dma.current[dma.rw_pos++] = i2s_port_data;
}
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/i2s.h
+35
View File
@@ -0,0 +1,35 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <stdint.h>
// current value of the outputs provided over i2s
extern uint32_t i2s_port_data;
int i2s_init();
uint8_t i2s_state(uint8_t pin);
void i2s_write(uint8_t pin, uint8_t val);
void i2s_push_sample();
Marlin/src/HAL/ESP32/inc/Conditionals_LCD.h
+26
View File
@@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if HAS_SPI_TFT || HAS_FSMC_TFT
#error "Sorry! TFT displays are not available for HAL/ESP32."
#endif
Marlin/src/HAL/ESP32/inc/Conditionals_adv.h
+22
View File
@@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
Marlin/src/HAL/ESP32/inc/Conditionals_post.h
+22
View File
@@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
Marlin/src/HAL/ESP32/inc/SanityCheck.h
+42
View File
@@ -0,0 +1,42 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for ESP32. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on ESP32."
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on ESP32."
#endif
#if BOTH(WIFISUPPORT, ESP3D_WIFISUPPORT)
#error "Only enable one WiFi option, either WIFISUPPORT or ESP3D_WIFISUPPORT."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on ESP32."
#endif
Marlin/src/HAL/ESP32/ota.cpp
+72
View File
@@ -0,0 +1,72 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#if BOTH(WIFISUPPORT, OTASUPPORT)
#include <WiFi.h>
#include <ESPmDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include <driver/timer.h>
void OTA_init() {
ArduinoOTA
.onStart([]() {
timer_pause(TIMER_GROUP_0, TIMER_0);
timer_pause(TIMER_GROUP_0, TIMER_1);
// U_FLASH or U_SPIFFS
String type = (ArduinoOTA.getCommand() == U_FLASH) ? "sketch" : "filesystem";
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
Serial.println("Start updating " + type);
})
.onEnd([]() {
Serial.println("\nEnd");
})
.onProgress([](unsigned int progress, unsigned int total) {
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
})
.onError([](ota_error_t error) {
Serial.printf("Error[%u]: ", error);
char *str;
switch (error) {
case OTA_AUTH_ERROR: str = "Auth Failed"; break;
case OTA_BEGIN_ERROR: str = "Begin Failed"; break;
case OTA_CONNECT_ERROR: str = "Connect Failed"; break;
case OTA_RECEIVE_ERROR: str = "Receive Failed"; break;
case OTA_END_ERROR: str = "End Failed"; break;
}
Serial.println(str);
});
ArduinoOTA.begin();
}
void OTA_handle() {
ArduinoOTA.handle();
}
#endif // WIFISUPPORT && OTASUPPORT
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/ota.h
+23
View File
@@ -0,0 +1,23 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
void OTA_init();
void OTA_handle();
Marlin/src/HAL/ESP32/servotimers.h
+22
View File
@@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
Marlin/src/HAL/ESP32/spi_pins.h
+24
View File
@@ -0,0 +1,24 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define SD_SS_PIN SDSS
#define SD_SCK_PIN 18
#define SD_MISO_PIN 19
#define SD_MOSI_PIN 23
Marlin/src/HAL/ESP32/spiffs.cpp
+43
View File
@@ -0,0 +1,43 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#if BOTH(WIFISUPPORT, WEBSUPPORT)
#include "../../core/serial.h"
#include <FS.h>
#include <SPIFFS.h>
bool spiffs_initialized;
void spiffs_init() {
if (SPIFFS.begin(true)) // formatOnFail = true
spiffs_initialized = true;
else
SERIAL_ERROR_MSG("SPIFFS mount failed");
}
#endif // WIFISUPPORT && WEBSUPPORT
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/spiffs.h
+26
View File
@@ -0,0 +1,26 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
extern bool spiffs_initialized;
void spiffs_init();
Marlin/src/HAL/ESP32/timers.cpp
+171
View File
@@ -0,0 +1,171 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include <stdio.h>
#include <esp_types.h>
#include <soc/timer_group_struct.h>
#include <driver/periph_ctrl.h>
#include <driver/timer.h>
#include "../../inc/MarlinConfig.h"
// ------------------------
// Local defines
// ------------------------
#define NUM_HARDWARE_TIMERS 4
// ------------------------
// Private Variables
// ------------------------
static timg_dev_t *TG[2] = {&TIMERG0, &TIMERG1};
const tTimerConfig TimerConfig [NUM_HARDWARE_TIMERS] = {
{ TIMER_GROUP_0, TIMER_0, STEPPER_TIMER_PRESCALE, stepTC_Handler }, // 0 - Stepper
{ TIMER_GROUP_0, TIMER_1, TEMP_TIMER_PRESCALE, tempTC_Handler }, // 1 - Temperature
{ TIMER_GROUP_1, TIMER_0, PWM_TIMER_PRESCALE, pwmTC_Handler }, // 2 - PWM
{ TIMER_GROUP_1, TIMER_1, TONE_TIMER_PRESCALE, toneTC_Handler }, // 3 - Tone
};
// ------------------------
// Public functions
// ------------------------
void IRAM_ATTR timer_isr(void *para) {
const tTimerConfig& timer = TimerConfig[(int)para];
// Retrieve the interrupt status and the counter value
// from the timer that reported the interrupt
uint32_t intr_status = TG[timer.group]->int_st_timers.val;
TG[timer.group]->hw_timer[timer.idx].update = 1;
// Clear the interrupt
if (intr_status & BIT(timer.idx)) {
switch (timer.idx) {
case TIMER_0: TG[timer.group]->int_clr_timers.t0 = 1; break;
case TIMER_1: TG[timer.group]->int_clr_timers.t1 = 1; break;
case TIMER_MAX: break;
}
}
timer.fn();
// After the alarm has been triggered
// Enable it again so it gets triggered the next time
TG[timer.group]->hw_timer[timer.idx].config.alarm_en = TIMER_ALARM_EN;
}
/**
* Enable and initialize the timer
* @param timer_num timer number to initialize
* @param frequency frequency of the timer
*/
void HAL_timer_start(const uint8_t timer_num, uint32_t frequency) {
const tTimerConfig timer = TimerConfig[timer_num];
timer_config_t config;
config.divider = timer.divider;
config.counter_dir = TIMER_COUNT_UP;
config.counter_en = TIMER_PAUSE;
config.alarm_en = TIMER_ALARM_EN;
config.intr_type = TIMER_INTR_LEVEL;
config.auto_reload = true;
// Select and initialize the timer
timer_init(timer.group, timer.idx, &config);
// Timer counter initial value and auto reload on alarm
timer_set_counter_value(timer.group, timer.idx, 0x00000000ULL);
// Configure the alam value and the interrupt on alarm
timer_set_alarm_value(timer.group, timer.idx, (HAL_TIMER_RATE) / timer.divider / frequency - 1);
timer_enable_intr(timer.group, timer.idx);
timer_isr_register(timer.group, timer.idx, timer_isr, (void*)(uint32_t)timer_num, 0, nullptr);
timer_start(timer.group, timer.idx);
}
/**
* Set the upper value of the timer, when the timer reaches this upper value the
* interrupt should be triggered and the counter reset
* @param timer_num timer number to set the count to
* @param count threshold at which the interrupt is triggered
*/
void HAL_timer_set_compare(const uint8_t timer_num, hal_timer_t count) {
const tTimerConfig timer = TimerConfig[timer_num];
timer_set_alarm_value(timer.group, timer.idx, count);
}
/**
* Get the current upper value of the timer
* @param timer_num timer number to get the count from
* @return the timer current threshold for the alarm to be triggered
*/
hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
uint64_t alarm_value;
timer_get_alarm_value(timer.group, timer.idx, &alarm_value);
return alarm_value;
}
/**
* Get the current counter value between 0 and the maximum count (HAL_timer_set_count)
* @param timer_num timer number to get the current count
* @return the current counter of the alarm
*/
hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
uint64_t counter_value;
timer_get_counter_value(timer.group, timer.idx, &counter_value);
return counter_value;
}
/**
* Enable timer interrupt on the timer
* @param timer_num timer number to enable interrupts on
*/
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
//const tTimerConfig timer = TimerConfig[timer_num];
//timer_enable_intr(timer.group, timer.idx);
}
/**
* Disable timer interrupt on the timer
* @param timer_num timer number to disable interrupts on
*/
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
//const tTimerConfig timer = TimerConfig[timer_num];
//timer_disable_intr(timer.group, timer.idx);
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
const tTimerConfig timer = TimerConfig[timer_num];
return TG[timer.group]->int_ena.val | BIT(timer_num);
}
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/timers.h
+140
View File
@@ -0,0 +1,140 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <stdint.h>
#include <driver/timer.h>
// ------------------------
// Defines
// ------------------------
#define FORCE_INLINE __attribute__((always_inline)) inline
typedef uint64_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFFULL
#ifndef STEP_TIMER_NUM
#define STEP_TIMER_NUM 0 // Timer Index for Stepper
#endif
#ifndef PULSE_TIMER_NUM
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#endif
#ifndef TEMP_TIMER_NUM
#define TEMP_TIMER_NUM 1 // Timer Index for Temperature
#endif
#ifndef PWM_TIMER_NUM
#define PWM_TIMER_NUM 2 // index of timer to use for PWM outputs
#endif
#ifndef TONE_TIMER_NUM
#define TONE_TIMER_NUM 3 // index of timer for beeper tones
#endif
#define HAL_TIMER_RATE APB_CLK_FREQ // frequency of timer peripherals
#if ENABLED(I2S_STEPPER_STREAM)
#define STEPPER_TIMER_PRESCALE 1
#define STEPPER_TIMER_RATE 250000 // 250khz, 4µs pulses of i2s word clock
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25
#else
#define STEPPER_TIMER_PRESCALE 40
#define STEPPER_TIMER_RATE ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
#endif
#define STEP_TIMER_MIN_INTERVAL 8 // minimum time in µs between stepper interrupts
#define TONE_TIMER_PRESCALE 1000 // Arbitrary value, no idea what i'm doing here
#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
#define PWM_TIMER_PRESCALE 10
#if ENABLED(FAST_PWM_FAN)
#define PWM_TIMER_FREQUENCY FAST_PWM_FAN_FREQUENCY
#else
#define PWM_TIMER_FREQUENCY (50*128) // 50Hz and 7bit resolution
#endif
#define MAX_PWM_PINS 32 // Number of PWM pin-slots
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#ifndef HAL_TEMP_TIMER_ISR
#define HAL_TEMP_TIMER_ISR() extern "C" void tempTC_Handler()
#endif
#ifndef HAL_STEP_TIMER_ISR
#define HAL_STEP_TIMER_ISR() extern "C" void stepTC_Handler()
#endif
#ifndef HAL_PWM_TIMER_ISR
#define HAL_PWM_TIMER_ISR() extern "C" void pwmTC_Handler()
#endif
#ifndef HAL_TONE_TIMER_ISR
#define HAL_TONE_TIMER_ISR() extern "C" void toneTC_Handler()
#endif
extern "C" {
void tempTC_Handler();
void stepTC_Handler();
void pwmTC_Handler();
void toneTC_Handler();
}
// ------------------------
// Types
// ------------------------
typedef struct {
timer_group_t group;
timer_idx_t idx;
uint32_t divider;
void (*fn)();
} tTimerConfig;
// ------------------------
// Public Variables
// ------------------------
extern const tTimerConfig TimerConfig[];
// ------------------------
// Public functions
// ------------------------
void HAL_timer_start (const uint8_t timer_num, uint32_t frequency);
void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t count);
hal_timer_t HAL_timer_get_compare(const uint8_t timer_num);
hal_timer_t HAL_timer_get_count(const uint8_t timer_num);
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)
Marlin/src/HAL/ESP32/watchdog.cpp
+42
View File
@@ -0,0 +1,42 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
#include "watchdog.h"
void watchdogSetup() {
// do whatever. don't remove this function.
}
void watchdog_init() {
// TODO
}
#endif // USE_WATCHDOG
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/watchdog.h
+38
View File
@@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
esp_err_t esp_task_wdt_reset();
#ifdef __cplusplus
}
#endif
// Initialize watchdog with a 4 second interrupt time
void watchdog_init();
// Reset watchdog.
inline void HAL_watchdog_refresh() { esp_task_wdt_reset(); }
Marlin/src/HAL/ESP32/web.cpp
+47
View File
@@ -0,0 +1,47 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfigPre.h"
#if BOTH(WIFISUPPORT, WEBSUPPORT)
#include "../../inc/MarlinConfig.h"
#undef DISABLED // esp32-hal-gpio.h
#include <SPIFFS.h>
#include "wifi.h"
AsyncEventSource events("/events"); // event source (Server-Sent events)
void onNotFound(AsyncWebServerRequest *request) {
request->send(404);
}
void web_init() {
server.addHandler(&events); // attach AsyncEventSource
server.serveStatic("/", SPIFFS, "/www").setDefaultFile("index.html");
server.onNotFound(onNotFound);
}
#endif // WIFISUPPORT && WEBSUPPORT
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/web.h
+24
View File
@@ -0,0 +1,24 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
void web_init();
Marlin/src/HAL/ESP32/wifi.cpp
+66
View File
@@ -0,0 +1,66 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../core/serial.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT)
#include <WiFi.h>
#include <ESPmDNS.h>
#include <ESPAsyncWebServer.h>
#include "wifi.h"
AsyncWebServer server(80);
#ifndef WIFI_HOSTNAME
#define WIFI_HOSTNAME DEFAULT_WIFI_HOSTNAME
#endif
void wifi_init() {
SERIAL_ECHO_MSG("Starting WiFi...");
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PWD);
while (WiFi.waitForConnectResult() != WL_CONNECTED) {
SERIAL_ERROR_MSG("Unable to connect to WiFi with SSID '" WIFI_SSID "', restarting.");
delay(5000);
ESP.restart();
}
delay(10);
if (!MDNS.begin(WIFI_HOSTNAME)) {
SERIAL_ERROR_MSG("Unable to start mDNS with hostname '" WIFI_HOSTNAME "', restarting.");
delay(5000);
ESP.restart();
}
MDNS.addService("http", "tcp", 80);
SERIAL_ECHOLNPAIR("Successfully connected to WiFi with SSID '" WIFI_SSID "', hostname: '" WIFI_HOSTNAME "', IP address: ", WiFi.localIP().toString().c_str());
}
#endif // WIFISUPPORT
#endif // ARDUINO_ARCH_ESP32
Marlin/src/HAL/ESP32/wifi.h
+30
View File
@@ -0,0 +1,30 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <ESPAsyncWebServer.h>
extern AsyncWebServer server;
#define DEFAULT_WIFI_HOSTNAME "marlin"
void wifi_init();
Marlin/src/HAL/HAL.h
+50
View File
@@ -0,0 +1,50 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "platforms.h"
#ifndef GCC_VERSION
#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
#endif
#include HAL_PATH(.,HAL.h)
#define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
#ifndef I2C_ADDRESS
#define I2C_ADDRESS(A) uint8_t(A)
#endif
// Needed for AVR sprintf_P PROGMEM extension
#ifndef S_FMT
#define S_FMT "%s"
#endif
// String helper
#ifndef PGMSTR
#define PGMSTR(NAM,STR) const char NAM[] = STR
#endif
inline void watchdog_refresh() {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
}
Marlin/src/HAL/STM32/HAL.cpp
+170
View File
@@ -0,0 +1,170 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "HAL.h"
#include "usb_serial.h"
#include "../../inc/MarlinConfig.h"
#include "../shared/Delay.h"
#ifdef USBCON
DefaultSerial1 MSerial0(false, SerialUSB);
#endif
#if ENABLED(SRAM_EEPROM_EMULATION)
#if STM32F7xx
#include <stm32f7xx_ll_pwr.h>
#elif STM32F4xx
#include <stm32f4xx_ll_pwr.h>
#else
#error "SRAM_EEPROM_EMULATION is currently only supported for STM32F4xx and STM32F7xx"
#endif
#endif
#if HAS_SD_HOST_DRIVE
#include "msc_sd.h"
#include "usbd_cdc_if.h"
#endif
// ------------------------
// Public Variables
// ------------------------
uint16_t HAL_adc_result;
// ------------------------
// Public functions
// ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task
void HAL_init() {
FastIO_init();
// Ensure F_CPU is a constant expression.
// If the compiler breaks here, it means that delay code that should compute at compile time will not work.
// So better safe than sorry here.
constexpr int cpuFreq = F_CPU;
UNUSED(cpuFreq);
#if ENABLED(SDSUPPORT) && DISABLED(SDIO_SUPPORT) && (defined(SDSS) && SDSS != -1)
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif
#if PIN_EXISTS(LED)
OUT_WRITE(LED_PIN, LOW);
#endif
#if ENABLED(SRAM_EEPROM_EMULATION)
__HAL_RCC_PWR_CLK_ENABLE();
HAL_PWR_EnableBkUpAccess(); // Enable access to backup SRAM
__HAL_RCC_BKPSRAM_CLK_ENABLE();
LL_PWR_EnableBkUpRegulator(); // Enable backup regulator
while (!LL_PWR_IsActiveFlag_BRR()); // Wait until backup regulator is initialized
#endif
SetTimerInterruptPriorities();
#if ENABLED(EMERGENCY_PARSER) && USBD_USE_CDC
USB_Hook_init();
#endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
#if HAS_SD_HOST_DRIVE
MSC_SD_init(); // Enable USB SD card access
#endif
#if PIN_EXISTS(USB_CONNECT)
OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection
delay(1000); // Give OS time to notice
WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING);
#endif
}
// HAL idle task
void HAL_idletask() {
#if HAS_SHARED_MEDIA
// Stm32duino currently doesn't have a "loop/idle" method
CDC_resume_receive();
CDC_continue_transmit();
#endif
}
void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); }
uint8_t HAL_get_reset_source() {
return
#ifdef RCC_FLAG_IWDGRST // Some sources may not exist...
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) ? RST_WATCHDOG :
#endif
#ifdef RCC_FLAG_IWDG1RST
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_IWDG1RST) ? RST_WATCHDOG :
#endif
#ifdef RCC_FLAG_IWDG2RST
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_IWDG2RST) ? RST_WATCHDOG :
#endif
#ifdef RCC_FLAG_SFTRST
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST) ? RST_SOFTWARE :
#endif
#ifdef RCC_FLAG_PINRST
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_PINRST) ? RST_EXTERNAL :
#endif
#ifdef RCC_FLAG_PORRST
RESET != __HAL_RCC_GET_FLAG(RCC_FLAG_PORRST) ? RST_POWER_ON :
#endif
0
;
}
void HAL_reboot() { NVIC_SystemReset(); }
void _delay_ms(const int delay_ms) { delay(delay_ms); }
extern "C" {
extern unsigned int _ebss; // end of bss section
}
// ------------------------
// ADC
// ------------------------
// TODO: Make sure this doesn't cause any delay
void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRead(adc_pin); }
uint16_t HAL_adc_get_result() { return HAL_adc_result; }
// Reset the system to initiate a firmware flash
void flashFirmware(const int16_t) { HAL_reboot(); }
// Maple Compatibility
volatile uint32_t systick_uptime_millis = 0;
systickCallback_t systick_user_callback;
void systick_attach_callback(systickCallback_t cb) { systick_user_callback = cb; }
void HAL_SYSTICK_Callback() {
systick_uptime_millis++;
if (systick_user_callback) systick_user_callback();
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/HAL.h
+225
View File
@@ -0,0 +1,225 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#define CPU_32_BIT
#include "../../core/macros.h"
#include "../shared/Marduino.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "Servo.h"
#include "watchdog.h"
#include "MarlinSerial.h"
#include "../../inc/MarlinConfigPre.h"
#include <stdint.h>
//
// Serial Ports
//
#ifdef USBCON
#include <USBSerial.h>
#include "../../core/serial_hook.h"
typedef ForwardSerial1Class< decltype(SerialUSB) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#endif
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#if SERIAL_PORT == -1
#define MYSERIAL1 MSerial0
#elif WITHIN(SERIAL_PORT, 1, 6)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL2 MSerial0
#elif WITHIN(SERIAL_PORT_2, 1, 6)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from 1 to 6. You can also use -1 if the board supports Native USB."
#endif
#endif
#ifdef SERIAL_PORT_3
#if SERIAL_PORT_3 == -1
#define MYSERIAL3 MSerial0
#elif WITHIN(SERIAL_PORT_3, 1, 6)
#define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
#else
#error "SERIAL_PORT_3 must be from 1 to 6. You can also use -1 if the board supports Native USB."
#endif
#endif
#ifdef MMU2_SERIAL_PORT
#if MMU2_SERIAL_PORT == -1
#define MMU2_SERIAL MSerial0
#elif WITHIN(MMU2_SERIAL_PORT, 1, 6)
#define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
#else
#error "MMU2_SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
#endif
#endif
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL MSerial0
#elif WITHIN(LCD_SERIAL_PORT, 1, 6)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
#error "LCD_SERIAL_PORT must be from 1 to 6. You can also use -1 if the board supports Native USB."
#endif
#if HAS_DGUS_LCD
#define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
#endif
#endif
/**
* TODO: review this to return 1 for pins that are not analog input
*/
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) (p)
#endif
#define CRITICAL_SECTION_START() uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END() if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define cli() __disable_irq()
#define sei() __enable_irq()
// On AVR this is in math.h?
#define square(x) ((x)*(x))
// ------------------------
// Types
// ------------------------
typedef int16_t pin_t;
#define HAL_SERVO_LIB libServo
#define PAUSE_SERVO_OUTPUT() libServo::pause_all_servos()
#define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()
// ------------------------
// Public Variables
// ------------------------
// result of last ADC conversion
extern uint16_t HAL_adc_result;
// ------------------------
// Public functions
// ------------------------
// Memory related
#define __bss_end __bss_end__
// Enable hooks into setup for HAL
void HAL_init();
#define HAL_IDLETASK 1
void HAL_idletask();
// Clear reset reason
void HAL_clear_reset_source();
// Reset reason
uint8_t HAL_get_reset_source();
void HAL_reboot();
void _delay_ms(const int delay);
extern "C" char* _sbrk(int incr);
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-function"
static inline int freeMemory() {
volatile char top;
return &top - reinterpret_cast<char*>(_sbrk(0));
}
#pragma GCC diagnostic pop
//
// ADC
//
#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT)
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION ADC_RESOLUTION // 12
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
inline void HAL_adc_init() { analogReadResolution(HAL_ADC_RESOLUTION); }
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result();
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
#ifdef STM32F1xx
#define JTAG_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_JTAGDISABLE)
#define JTAGSWD_DISABLE() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_DISABLE)
#endif
#define PLATFORM_M997_SUPPORT
void flashFirmware(const int16_t);
// Maple Compatibility
typedef void (*systickCallback_t)(void);
void systick_attach_callback(systickCallback_t cb);
void HAL_SYSTICK_Callback();
extern volatile uint32_t systick_uptime_millis;
#define HAL_CAN_SET_PWM_FREQ // This HAL supports PWM Frequency adjustment
/**
* set_pwm_frequency
* Set the frequency of the timer corresponding to the provided pin
* All Timer PWM pins run at the same frequency
*/
void set_pwm_frequency(const pin_t pin, int f_desired);
/**
* set_pwm_duty
* Set the PWM duty cycle of the provided pin to the provided value
* Optionally allows inverting the duty cycle [default = false]
* Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
*/
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
Marlin/src/HAL/STM32/HAL_MinSerial.cpp
+152
View File
@@ -0,0 +1,152 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include "watchdog.h"
/* Instruction Synchronization Barrier */
#define isb() __asm__ __volatile__ ("isb" : : : "memory")
/* Data Synchronization Barrier */
#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
// Dumb mapping over the registers of a USART device on STM32
struct USARTMin {
volatile uint32_t SR;
volatile uint32_t DR;
volatile uint32_t BRR;
volatile uint32_t CR1;
volatile uint32_t CR2;
};
#if WITHIN(SERIAL_PORT, 1, 6)
// Depending on the CPU, the serial port is different for USART1
static const uintptr_t regsAddr[] = {
TERN(STM32F1xx, 0x40013800, 0x40011000), // USART1
0x40004400, // USART2
0x40004800, // USART3
0x40004C00, // UART4_BASE
0x40005000, // UART5_BASE
0x40011400 // USART6
};
static USARTMin * regs = (USARTMin*)regsAddr[SERIAL_PORT - 1];
#endif
static void TXBegin() {
#if !WITHIN(SERIAL_PORT, 1, 6)
#warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
#warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
#else
// This is common between STM32F1/STM32F2 and STM32F4
const int nvicUART[] = { /* NVIC_USART1 */ 37, /* NVIC_USART2 */ 38, /* NVIC_USART3 */ 39, /* NVIC_UART4 */ 52, /* NVIC_UART5 */ 53, /* NVIC_USART6 */ 71 };
int nvicIndex = nvicUART[SERIAL_PORT - 1];
struct NVICMin {
volatile uint32_t ISER[32];
volatile uint32_t ICER[32];
};
NVICMin *nvicBase = (NVICMin*)0xE000E100;
SBI32(nvicBase->ICER[nvicIndex >> 5], nvicIndex & 0x1F);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
dsb();
isb();
// Example for USART1 disable: (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
// Too difficult to reimplement here, let's query the STM32duino macro here
#if SERIAL_PORT == 1
__HAL_RCC_USART1_CLK_DISABLE();
__HAL_RCC_USART1_CLK_ENABLE();
#elif SERIAL_PORT == 2
__HAL_RCC_USART2_CLK_DISABLE();
__HAL_RCC_USART2_CLK_ENABLE();
#elif SERIAL_PORT == 3
__HAL_RCC_USART3_CLK_DISABLE();
__HAL_RCC_USART3_CLK_ENABLE();
#elif SERIAL_PORT == 4
__HAL_RCC_UART4_CLK_DISABLE(); // BEWARE: UART4 and not USART4 here
__HAL_RCC_UART4_CLK_ENABLE();
#elif SERIAL_PORT == 5
__HAL_RCC_UART5_CLK_DISABLE(); // BEWARE: UART5 and not USART5 here
__HAL_RCC_UART5_CLK_ENABLE();
#elif SERIAL_PORT == 6
__HAL_RCC_USART6_CLK_DISABLE();
__HAL_RCC_USART6_CLK_ENABLE();
#endif
uint32_t brr = regs->BRR;
regs->CR1 = 0; // Reset the USART
regs->CR2 = 0; // 1 stop bit
// If we don't touch the BRR (baudrate register), we don't need to recompute.
regs->BRR = brr;
regs->CR1 = _BV(3) | _BV(13); // 8 bits, no parity, 1 stop bit (TE | UE)
#endif
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
#if WITHIN(SERIAL_PORT, 1, 6)
constexpr uint32_t usart_sr_txe = _BV(7);
while (!(regs->SR & usart_sr_txe)) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
sw_barrier();
}
regs->DR = c;
#else
// Let's hope a mystical guru will fix this, one day by writting interrupt-free USB CDC ACM code (or, at least, by polling the registers since interrupt will be queued but will never trigger)
// For now, it's completely lost to oblivion.
#endif
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE) && DISABLED(STM32F0xx) // Cortex M0 can't jump to a symbol that's too far from the current function, so we work around this in exception_arm.cpp
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // ARDUINO_ARCH_STM32
Marlin/src/HAL/STM32/HAL_SPI.cpp
+229
View File
@@ -0,0 +1,229 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#include <SPI.h>
// ------------------------
// Public Variables
// ------------------------
static SPISettings spiConfig;
// ------------------------
// Public functions
// ------------------------
#if ENABLED(SOFTWARE_SPI)
// ------------------------
// Software SPI
// ------------------------
#include "../shared/Delay.h"
void spiBegin(void) {
OUT_WRITE(SD_SS_PIN, HIGH);
OUT_WRITE(SD_SCK_PIN, HIGH);
SET_INPUT(SD_MISO_PIN);
OUT_WRITE(SD_MOSI_PIN, HIGH);
}
// Use function with compile-time value so we can actually reach the desired frequency
// Need to adjust this a little bit: on a 72MHz clock, we have 14ns/clock
// and we'll use ~3 cycles to jump to the method and going back, so it'll take ~40ns from the given clock here
#define CALLING_COST_NS (3U * 1000000000U) / (F_CPU)
void (*delaySPIFunc)();
void delaySPI_125() { DELAY_NS(125 - CALLING_COST_NS); }
void delaySPI_250() { DELAY_NS(250 - CALLING_COST_NS); }
void delaySPI_500() { DELAY_NS(500 - CALLING_COST_NS); }
void delaySPI_1000() { DELAY_NS(1000 - CALLING_COST_NS); }
void delaySPI_2000() { DELAY_NS(2000 - CALLING_COST_NS); }
void delaySPI_4000() { DELAY_NS(4000 - CALLING_COST_NS); }
void spiInit(uint8_t spiRate) {
// Use datarates Marlin uses
switch (spiRate) {
case SPI_FULL_SPEED: delaySPIFunc = &delaySPI_125; break; // desired: 8,000,000 actual: ~1.1M
case SPI_HALF_SPEED: delaySPIFunc = &delaySPI_125; break; // desired: 4,000,000 actual: ~1.1M
case SPI_QUARTER_SPEED:delaySPIFunc = &delaySPI_250; break; // desired: 2,000,000 actual: ~890K
case SPI_EIGHTH_SPEED: delaySPIFunc = &delaySPI_500; break; // desired: 1,000,000 actual: ~590K
case SPI_SPEED_5: delaySPIFunc = &delaySPI_1000; break; // desired: 500,000 actual: ~360K
case SPI_SPEED_6: delaySPIFunc = &delaySPI_2000; break; // desired: 250,000 actual: ~210K
default: delaySPIFunc = &delaySPI_4000; break; // desired: 125,000 actual: ~123K
}
SPI.begin();
}
// Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { /* do nothing */ }
uint8_t HAL_SPI_STM32_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
for (uint8_t bits = 8; bits--;) {
WRITE(SD_SCK_PIN, LOW);
WRITE(SD_MOSI_PIN, b & 0x80);
delaySPIFunc();
WRITE(SD_SCK_PIN, HIGH);
delaySPIFunc();
b <<= 1; // little setup time
b |= (READ(SD_MISO_PIN) != 0);
}
DELAY_NS(125);
return b;
}
// Soft SPI receive byte
uint8_t spiRec() {
DISABLE_ISRS(); // No interrupts during byte receive
const uint8_t data = HAL_SPI_STM32_SpiTransfer_Mode_3(0xFF);
ENABLE_ISRS(); // Enable interrupts
return data;
}
// Soft SPI read data
void spiRead(uint8_t *buf, uint16_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
buf[i] = spiRec();
}
// Soft SPI send byte
void spiSend(uint8_t data) {
DISABLE_ISRS(); // No interrupts during byte send
HAL_SPI_STM32_SpiTransfer_Mode_3(data); // Don't care what is received
ENABLE_ISRS(); // Enable interrupts
}
// Soft SPI send block
void spiSendBlock(uint8_t token, const uint8_t *buf) {
spiSend(token);
for (uint16_t i = 0; i < 512; i++)
spiSend(buf[i]);
}
#else
// ------------------------
// Hardware SPI
// ------------------------
/**
* VGPV SPI speed start and PCLK2/2, by default 108/2 = 54Mhz
*/
/**
* @brief Begin SPI port setup
*
* @return Nothing
*
* @details Only configures SS pin since stm32duino creates and initialize the SPI object
*/
void spiBegin() {
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
}
// Configure SPI for specified SPI speed
void spiInit(uint8_t spiRate) {
// Use datarates Marlin uses
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000
case SPI_HALF_SPEED: clock = 5000000; break;
case SPI_QUARTER_SPEED: clock = 2500000; break;
case SPI_EIGHTH_SPEED: clock = 1250000; break;
case SPI_SPEED_5: clock = 625000; break;
case SPI_SPEED_6: clock = 300000; break;
default:
clock = 4000000; // Default from the SPI library
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
#if ENABLED(CUSTOM_SPI_PINS)
SPI.setMISO(SD_MISO_PIN);
SPI.setMOSI(SD_MOSI_PIN);
SPI.setSCLK(SD_SCK_PIN);
#endif
SPI.begin();
}
/**
* @brief Receives a single byte from the SPI port.
*
* @return Byte received
*
* @details
*/
uint8_t spiRec() {
uint8_t returnByte = SPI.transfer(0xFF);
return returnByte;
}
/**
* @brief Receive a number of bytes from the SPI port to a buffer
*
* @param buf Pointer to starting address of buffer to write to.
* @param nbyte Number of bytes to receive.
* @return Nothing
*
* @details Uses DMA
*/
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte == 0) return;
memset(buf, 0xFF, nbyte);
SPI.transfer(buf, nbyte);
}
/**
* @brief Send a single byte on SPI port
*
* @param b Byte to send
*
* @details
*/
void spiSend(uint8_t b) {
SPI.transfer(b);
}
/**
* @brief Write token and then write from 512 byte buffer to SPI (for SD card)
*
* @param buf Pointer with buffer start address
* @return Nothing
*
* @details Use DMA
*/
void spiSendBlock(uint8_t token, const uint8_t *buf) {
uint8_t rxBuf[512];
SPI.transfer(token);
SPI.transfer((uint8_t*)buf, &rxBuf, 512);
}
#endif // SOFTWARE_SPI
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/MarlinSPI.cpp
+168
View File
@@ -0,0 +1,168 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(STM32H7xx)
#include "MarlinSPI.h"
static void spi_init(spi_t *obj, uint32_t speed, spi_mode_e mode, uint8_t msb, uint32_t dataSize) {
spi_init(obj, speed, mode, msb);
// spi_init set 8bit always
// TODO: copy the code from spi_init and handle data size, to avoid double init always!!
if (dataSize != SPI_DATASIZE_8BIT) {
obj->handle.Init.DataSize = dataSize;
HAL_SPI_Init(&obj->handle);
__HAL_SPI_ENABLE(&obj->handle);
}
}
void MarlinSPI::setClockDivider(uint8_t _div) {
_speed = spi_getClkFreq(&_spi);// / _div;
_clockDivider = _div;
}
void MarlinSPI::begin(void) {
//TODO: only call spi_init if any parameter changed!!
spi_init(&_spi, _speed, _dataMode, _bitOrder, _dataSize);
}
void MarlinSPI::setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc) {
_dmaHandle.Init.Direction = direction;
_dmaHandle.Init.PeriphInc = DMA_PINC_DISABLE;
_dmaHandle.Init.Mode = DMA_NORMAL;
_dmaHandle.Init.Priority = DMA_PRIORITY_LOW;
_dmaHandle.Init.MemInc = minc ? DMA_MINC_ENABLE : DMA_MINC_DISABLE;
if (_dataSize == DATA_SIZE_8BIT) {
_dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
_dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
}
else {
_dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
_dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
}
#ifdef STM32F4xx
_dmaHandle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
#endif
// start DMA hardware
// TODO: check if hardware is already enabled
#ifdef SPI1_BASE
if (_spiHandle.Instance == SPI1) {
#ifdef STM32F1xx
__HAL_RCC_DMA1_CLK_ENABLE();
_dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Channel3 : DMA1_Channel2;
#elif defined(STM32F4xx)
__HAL_RCC_DMA2_CLK_ENABLE();
_dmaHandle.Init.Channel = DMA_CHANNEL_3;
_dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA2_Stream3 : DMA2_Stream0;
#endif
}
#endif
#ifdef SPI2_BASE
if (_spiHandle.Instance == SPI2) {
#ifdef STM32F1xx
__HAL_RCC_DMA1_CLK_ENABLE();
_dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Channel5 : DMA1_Channel4;
#elif defined(STM32F4xx)
__HAL_RCC_DMA1_CLK_ENABLE();
_dmaHandle.Init.Channel = DMA_CHANNEL_0;
_dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Stream4 : DMA1_Stream3;
#endif
}
#endif
#ifdef SPI3_BASE
if (_spiHandle.Instance == SPI3) {
#ifdef STM32F1xx
__HAL_RCC_DMA2_CLK_ENABLE();
_dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA2_Channel2 : DMA2_Channel1;
#elif defined(STM32F4xx)
__HAL_RCC_DMA1_CLK_ENABLE();
_dmaHandle.Init.Channel = DMA_CHANNEL_0;
_dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Stream5 : DMA1_Stream2;
#endif
}
#endif
HAL_DMA_Init(&_dmaHandle);
}
byte MarlinSPI::transfer(uint8_t _data) {
uint8_t rxData = 0xFF;
HAL_SPI_TransmitReceive(&_spi.handle, &_data, &rxData, 1, HAL_MAX_DELAY);
return rxData;
}
uint8_t MarlinSPI::dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length) {
const uint8_t ff = 0xFF;
//if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) //only enable if disabled
__HAL_SPI_ENABLE(&_spi.handle);
if (receiveBuf) {
setupDma(_spi.handle, _dmaRx, DMA_PERIPH_TO_MEMORY, true);
HAL_DMA_Start(&_dmaRx, (uint32_t)&(_spi.handle.Instance->DR), (uint32_t)receiveBuf, length);
SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_RXDMAEN); /* Enable Rx DMA Request */
}
// check for 2 lines transfer
bool mincTransmit = true;
if (transmitBuf == nullptr && _spi.handle.Init.Direction == SPI_DIRECTION_2LINES && _spi.handle.Init.Mode == SPI_MODE_MASTER) {
transmitBuf = &ff;
mincTransmit = false;
}
if (transmitBuf) {
setupDma(_spi.handle, _dmaTx, DMA_MEMORY_TO_PERIPH, mincTransmit);
HAL_DMA_Start(&_dmaTx, (uint32_t)transmitBuf, (uint32_t)&(_spi.handle.Instance->DR), length);
SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_TXDMAEN); /* Enable Tx DMA Request */
}
if (transmitBuf) {
HAL_DMA_PollForTransfer(&_dmaTx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
HAL_DMA_Abort(&_dmaTx);
HAL_DMA_DeInit(&_dmaTx);
}
// while ((_spi.handle.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
if (receiveBuf) {
HAL_DMA_PollForTransfer(&_dmaRx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
HAL_DMA_Abort(&_dmaRx);
HAL_DMA_DeInit(&_dmaRx);
}
return 1;
}
uint8_t MarlinSPI::dmaSend(const void * transmitBuf, uint16_t length, bool minc) {
setupDma(_spi.handle, _dmaTx, DMA_MEMORY_TO_PERIPH, minc);
HAL_DMA_Start(&_dmaTx, (uint32_t)transmitBuf, (uint32_t)&(_spi.handle.Instance->DR), length);
__HAL_SPI_ENABLE(&_spi.handle);
SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_TXDMAEN); /* Enable Tx DMA Request */
HAL_DMA_PollForTransfer(&_dmaTx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
HAL_DMA_Abort(&_dmaTx);
// DeInit objects
HAL_DMA_DeInit(&_dmaTx);
return 1;
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/MarlinSPI.h
+107
View File
@@ -0,0 +1,107 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "HAL.h"
#include <SPI.h>
extern "C" {
#include <utility/spi_com.h>
}
/**
* Marlin currently requires 3 SPI classes:
*
* SPIClass:
* This class is normally provided by frameworks and has a semi-default interface.
* This is needed because some libraries reference it globally.
*
* SPISettings:
* Container for SPI configs for SPIClass. As above, libraries may reference it globally.
*
* These two classes are often provided by frameworks so we cannot extend them to add
* useful methods for Marlin.
*
* MarlinSPI:
* Provides the default SPIClass interface plus some Marlin goodies such as a simplified
* interface for SPI DMA transfer.
*
*/
#define DATA_SIZE_8BIT SPI_DATASIZE_8BIT
#define DATA_SIZE_16BIT SPI_DATASIZE_16BIT
class MarlinSPI {
public:
MarlinSPI() : MarlinSPI(NC, NC, NC, NC) {}
MarlinSPI(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)NC) : _mosiPin(mosi), _misoPin(miso), _sckPin(sclk), _ssPin(ssel) {
_spi.pin_miso = digitalPinToPinName(_misoPin);
_spi.pin_mosi = digitalPinToPinName(_mosiPin);
_spi.pin_sclk = digitalPinToPinName(_sckPin);
_spi.pin_ssel = digitalPinToPinName(_ssPin);
_dataSize = DATA_SIZE_8BIT;
_bitOrder = MSBFIRST;
_dataMode = SPI_MODE_0;
_spi.handle.State = HAL_SPI_STATE_RESET;
setClockDivider(SPI_SPEED_CLOCK_DIV2_MHZ);
}
void begin(void);
void end(void) {}
byte transfer(uint8_t _data);
uint8_t dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length);
uint8_t dmaSend(const void * transmitBuf, uint16_t length, bool minc = true);
/* These methods are deprecated and kept for compatibility.
* Use SPISettings with SPI.beginTransaction() to configure SPI parameters.
*/
void setBitOrder(BitOrder _order) { _bitOrder = _order; }
void setDataMode(uint8_t _mode) {
switch (_mode) {
case SPI_MODE0: _dataMode = SPI_MODE_0; break;
case SPI_MODE1: _dataMode = SPI_MODE_1; break;
case SPI_MODE2: _dataMode = SPI_MODE_2; break;
case SPI_MODE3: _dataMode = SPI_MODE_3; break;
}
}
void setClockDivider(uint8_t _div);
private:
void setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc = false);
spi_t _spi;
DMA_HandleTypeDef _dmaTx;
DMA_HandleTypeDef _dmaRx;
BitOrder _bitOrder;
spi_mode_e _dataMode;
uint8_t _clockDivider;
uint32_t _speed;
uint32_t _dataSize;
pin_t _mosiPin;
pin_t _misoPin;
pin_t _sckPin;
pin_t _ssPin;
};
Marlin/src/HAL/STM32/MarlinSerial.cpp
+104
View File
@@ -0,0 +1,104 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#include "MarlinSerial.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
#ifndef USART4
#define USART4 UART4
#endif
#ifndef USART5
#define USART5 UART5
#endif
#define DECLARE_SERIAL_PORT(ser_num) \
void _rx_complete_irq_ ## ser_num (serial_t * obj); \
MSerialT MSerial ## ser_num (true, USART ## ser_num, &_rx_complete_irq_ ## ser_num); \
void _rx_complete_irq_ ## ser_num (serial_t * obj) { MSerial ## ser_num ._rx_complete_irq(obj); }
#if USING_HW_SERIAL1
DECLARE_SERIAL_PORT(1)
#endif
#if USING_HW_SERIAL2
DECLARE_SERIAL_PORT(2)
#endif
#if USING_HW_SERIAL3
DECLARE_SERIAL_PORT(3)
#endif
#if USING_HW_SERIAL4
DECLARE_SERIAL_PORT(4)
#endif
#if USING_HW_SERIAL5
DECLARE_SERIAL_PORT(5)
#endif
#if USING_HW_SERIAL6
DECLARE_SERIAL_PORT(6)
#endif
#if USING_HW_SERIAL7
DECLARE_SERIAL_PORT(7)
#endif
#if USING_HW_SERIAL8
DECLARE_SERIAL_PORT(8)
#endif
#if USING_HW_SERIAL9
DECLARE_SERIAL_PORT(9)
#endif
#if USING_HW_SERIAL10
DECLARE_SERIAL_PORT(10)
#endif
#if USING_HW_SERIALLP1
DECLARE_SERIAL_PORT(LP1)
#endif
void MarlinSerial::begin(unsigned long baud, uint8_t config) {
HardwareSerial::begin(baud, config);
// Replace the IRQ callback with the one we have defined
TERN_(EMERGENCY_PARSER, _serial.rx_callback = _rx_callback);
}
// This function is Copyright (c) 2006 Nicholas Zambetti.
void MarlinSerial::_rx_complete_irq(serial_t *obj) {
// No Parity error, read byte and store it in the buffer if there is room
unsigned char c;
if (uart_getc(obj, &c) == 0) {
rx_buffer_index_t i = (unsigned int)(obj->rx_head + 1) % SERIAL_RX_BUFFER_SIZE;
// if we should be storing the received character into the location
// just before the tail (meaning that the head would advance to the
// current location of the tail), we're about to overflow the buffer
// and so we don't write the character or advance the head.
if (i != obj->rx_tail) {
obj->rx_buff[obj->rx_head] = c;
obj->rx_head = i;
}
#if ENABLED(EMERGENCY_PARSER)
emergency_parser.update(static_cast<MSerialT*>(this)->emergency_state, c);
#endif
}
}
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/MarlinSerial.h
+56
View File
@@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
#include "../../core/serial_hook.h"
typedef void (*usart_rx_callback_t)(serial_t * obj);
struct MarlinSerial : public HardwareSerial {
MarlinSerial(void *peripheral, usart_rx_callback_t rx_callback) :
HardwareSerial(peripheral), _rx_callback(rx_callback)
{ }
void begin(unsigned long baud, uint8_t config);
inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
void _rx_complete_irq(serial_t *obj);
protected:
usart_rx_callback_t _rx_callback;
};
typedef Serial1Class<MarlinSerial> MSerialT;
extern MSerialT MSerial1;
extern MSerialT MSerial2;
extern MSerialT MSerial3;
extern MSerialT MSerial4;
extern MSerialT MSerial5;
extern MSerialT MSerial6;
extern MSerialT MSerial7;
extern MSerialT MSerial8;
extern MSerialT MSerial9;
extern MSerialT MSerial10;
extern MSerialT MSerialLP1;
Marlin/src/HAL/STM32/README.md
+11
View File
@@ -0,0 +1,11 @@
# Generic STM32 HAL based on the stm32duino core
This HAL is intended to act as the generic STM32 HAL for all STM32 chips (The whole F, H and L family).
Currently it supports:
* STM32F0xx
* STM32F1xx
* STM32F4xx
* STM32F7xx
Targeting the official [Arduino STM32 Core](https://github.com/stm32duino/Arduino_Core_STM32).
Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
+346
View File
@@ -0,0 +1,346 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#if ENABLED(SDIO_SUPPORT)
#include <stdint.h>
#include <stdbool.h>
#if NONE(STM32F103xE, STM32F103xG, STM32F4xx, STM32F7xx)
#error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported"
#endif
#if HAS_SD_HOST_DRIVE
// use USB drivers
extern "C" {
int8_t SD_MSC_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len);
int8_t SD_MSC_Write(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len);
extern SD_HandleTypeDef hsd;
}
bool SDIO_Init() {
return hsd.State == HAL_SD_STATE_READY; // return pass/fail status
}
bool SDIO_ReadBlock(uint32_t block, uint8_t *src) {
int8_t status = SD_MSC_Read(0, (uint8_t*)src, block, 1); // read one 512 byte block
return (bool) status;
}
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
int8_t status = SD_MSC_Write(0, (uint8_t*)src, block, 1); // write one 512 byte block
return (bool) status;
}
#else // !USBD_USE_CDC_COMPOSITE
// use local drivers
#if defined(STM32F103xE) || defined(STM32F103xG)
#include <stm32f1xx_hal_rcc_ex.h>
#include <stm32f1xx_hal_sd.h>
#elif defined(STM32F4xx)
#include <stm32f4xx_hal_rcc.h>
#include <stm32f4xx_hal_dma.h>
#include <stm32f4xx_hal_gpio.h>
#include <stm32f4xx_hal_sd.h>
#elif defined(STM32F7xx)
#include <stm32f7xx_hal_rcc.h>
#include <stm32f7xx_hal_dma.h>
#include <stm32f7xx_hal_gpio.h>
#include <stm32f7xx_hal_sd.h>
#else
#error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported"
#endif
// Fixed
#define SDIO_D0_PIN PC8
#define SDIO_D1_PIN PC9
#define SDIO_D2_PIN PC10
#define SDIO_D3_PIN PC11
#define SDIO_CK_PIN PC12
#define SDIO_CMD_PIN PD2
SD_HandleTypeDef hsd; // create SDIO structure
// F4 supports one DMA for RX and another for TX, but Marlin will never
// do read and write at same time, so we use the same DMA for both.
DMA_HandleTypeDef hdma_sdio;
/*
SDIO_INIT_CLK_DIV is 118
SDIO clock frequency is 48MHz / (TRANSFER_CLOCK_DIV + 2)
SDIO init clock frequency should not exceed 400KHz = 48MHz / (118 + 2)
Default TRANSFER_CLOCK_DIV is 2 (118 / 40)
Default SDIO clock frequency is 48MHz / (2 + 2) = 12 MHz
This might be too fast for stable SDIO operations
MKS Robin board seems to have stable SDIO with BusWide 1bit and ClockDiv 8 i.e. 4.8MHz SDIO clock frequency
Additional testing is required as there are clearly some 4bit initialization problems
*/
#ifndef USBD_OK
#define USBD_OK 0
#endif
// Target Clock, configurable. Default is 18MHz, from STM32F1
#ifndef SDIO_CLOCK
#define SDIO_CLOCK 18000000 // 18 MHz
#endif
// SDIO retries, configurable. Default is 3, from STM32F1
#ifndef SDIO_READ_RETRIES
#define SDIO_READ_RETRIES 3
#endif
// SDIO Max Clock (naming from STM Manual, don't change)
#define SDIOCLK 48000000
static uint32_t clock_to_divider(uint32_t clk) {
// limit the SDIO master clock to 8/3 of PCLK2. See STM32 Manuals
// Also limited to no more than 48Mhz (SDIOCLK).
const uint32_t pclk2 = HAL_RCC_GetPCLK2Freq();
clk = min(clk, (uint32_t)(pclk2 * 8 / 3));
clk = min(clk, (uint32_t)SDIOCLK);
// Round up divider, so we don't run the card over the speed supported,
// and subtract by 2, because STM32 will add 2, as written in the manual:
// SDIO_CK frequency = SDIOCLK / [CLKDIV + 2]
return pclk2 / clk + (pclk2 % clk != 0) - 2;
}
void go_to_transfer_speed() {
/* Default SDIO peripheral configuration for SD card initialization */
hsd.Init.ClockEdge = hsd.Init.ClockEdge;
hsd.Init.ClockBypass = hsd.Init.ClockBypass;
hsd.Init.ClockPowerSave = hsd.Init.ClockPowerSave;
hsd.Init.BusWide = hsd.Init.BusWide;
hsd.Init.HardwareFlowControl = hsd.Init.HardwareFlowControl;
hsd.Init.ClockDiv = clock_to_divider(SDIO_CLOCK);
/* Initialize SDIO peripheral interface with default configuration */
SDIO_Init(hsd.Instance, hsd.Init);
}
void SD_LowLevel_Init(void) {
uint32_t tempreg;
__HAL_RCC_GPIOC_CLK_ENABLE(); //enable GPIO clocks
__HAL_RCC_GPIOD_CLK_ENABLE(); //enable GPIO clocks
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = 1; //GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
#if DISABLED(STM32F1xx)
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
#endif
GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_12; // D0 & SCK
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
#if PINS_EXIST(SDIO_D1, SDIO_D2, SDIO_D3) // define D1-D3 only if have a four bit wide SDIO bus
GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11; // D1-D3
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
#endif
// Configure PD.02 CMD line
GPIO_InitStruct.Pin = GPIO_PIN_2;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
// Setup DMA
#if defined(STM32F1xx)
hdma_sdio.Init.Mode = DMA_NORMAL;
hdma_sdio.Instance = DMA2_Channel4;
HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
#elif defined(STM32F4xx)
hdma_sdio.Init.Mode = DMA_PFCTRL;
hdma_sdio.Instance = DMA2_Stream3;
hdma_sdio.Init.Channel = DMA_CHANNEL_4;
hdma_sdio.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
hdma_sdio.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
hdma_sdio.Init.MemBurst = DMA_MBURST_INC4;
hdma_sdio.Init.PeriphBurst = DMA_PBURST_INC4;
HAL_NVIC_EnableIRQ(DMA2_Stream3_IRQn);
#endif
HAL_NVIC_EnableIRQ(SDIO_IRQn);
hdma_sdio.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_sdio.Init.MemInc = DMA_MINC_ENABLE;
hdma_sdio.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
hdma_sdio.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
hdma_sdio.Init.Priority = DMA_PRIORITY_LOW;
__HAL_LINKDMA(&hsd, hdmarx, hdma_sdio);
__HAL_LINKDMA(&hsd, hdmatx, hdma_sdio);
#if defined(STM32F1xx)
__HAL_RCC_SDIO_CLK_ENABLE();
__HAL_RCC_DMA2_CLK_ENABLE();
#else
__HAL_RCC_SDIO_FORCE_RESET();
delay(2);
__HAL_RCC_SDIO_RELEASE_RESET();
delay(2);
__HAL_RCC_SDIO_CLK_ENABLE();
__HAL_RCC_DMA2_FORCE_RESET();
delay(2);
__HAL_RCC_DMA2_RELEASE_RESET();
delay(2);
__HAL_RCC_DMA2_CLK_ENABLE();
#endif
//Initialize the SDIO (with initial <400Khz Clock)
tempreg = 0; //Reset value
tempreg |= SDIO_CLKCR_CLKEN; // Clock enabled
tempreg |= SDIO_INIT_CLK_DIV; // Clock Divider. Clock = 48000 / (118 + 2) = 400Khz
// Keep the rest at 0 => HW_Flow Disabled, Rising Clock Edge, Disable CLK ByPass, Bus Width = 0, Power save Disable
SDIO->CLKCR = tempreg;
// Power up the SDIO
SDIO_PowerState_ON(SDIO);
hsd.Instance = SDIO;
}
void HAL_SD_MspInit(SD_HandleTypeDef *hsd) { // application specific init
UNUSED(hsd); // Prevent unused argument(s) compilation warning
__HAL_RCC_SDIO_CLK_ENABLE(); // turn on SDIO clock
}
bool SDIO_Init() {
uint8_t retryCnt = SDIO_READ_RETRIES;
bool status;
hsd.Instance = SDIO;
hsd.State = HAL_SD_STATE_RESET;
SD_LowLevel_Init();
uint8_t retry_Cnt = retryCnt;
for (;;) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
status = (bool) HAL_SD_Init(&hsd);
if (!status) break;
if (!--retry_Cnt) return false; // return failing status if retries are exhausted
}
go_to_transfer_speed();
#if PINS_EXIST(SDIO_D1, SDIO_D2, SDIO_D3) // go to 4 bit wide mode if pins are defined
retry_Cnt = retryCnt;
for (;;) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
if (!HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B)) break; // some cards are only 1 bit wide so a pass here is not required
if (!--retry_Cnt) break;
}
if (!retry_Cnt) { // wide bus failed, go back to one bit wide mode
hsd.State = (HAL_SD_StateTypeDef) 0; // HAL_SD_STATE_RESET
SD_LowLevel_Init();
retry_Cnt = retryCnt;
for (;;) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
status = (bool) HAL_SD_Init(&hsd);
if (!status) break;
if (!--retry_Cnt) return false; // return failing status if retries are exhausted
}
go_to_transfer_speed();
}
#endif
return true;
}
static bool SDIO_ReadWriteBlock_DMA(uint32_t block, const uint8_t *src, uint8_t *dst) {
if (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) return false;
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
HAL_StatusTypeDef ret;
if (src) {
hdma_sdio.Init.Direction = DMA_MEMORY_TO_PERIPH;
HAL_DMA_Init(&hdma_sdio);
ret = HAL_SD_WriteBlocks_DMA(&hsd, (uint8_t *)src, block, 1);
}
else {
hdma_sdio.Init.Direction = DMA_PERIPH_TO_MEMORY;
HAL_DMA_Init(&hdma_sdio);
ret = HAL_SD_ReadBlocks_DMA(&hsd, (uint8_t *)dst, block, 1);
}
if (ret != HAL_OK) {
HAL_DMA_Abort_IT(&hdma_sdio);
HAL_DMA_DeInit(&hdma_sdio);
return false;
}
millis_t timeout = millis() + 500;
// Wait the transfer
while (hsd.State != HAL_SD_STATE_READY) {
if (ELAPSED(millis(), timeout)) {
HAL_DMA_Abort_IT(&hdma_sdio);
HAL_DMA_DeInit(&hdma_sdio);
return false;
}
}
while (__HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TC_FLAG_INDEX(&hdma_sdio)) != 0
|| __HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TE_FLAG_INDEX(&hdma_sdio)) != 0) { /* nada */ }
HAL_DMA_Abort_IT(&hdma_sdio);
HAL_DMA_DeInit(&hdma_sdio);
timeout = millis() + 500;
while (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) if (ELAPSED(millis(), timeout)) return false;
return true;
}
bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
uint8_t retries = SDIO_READ_RETRIES;
while (retries--) if (SDIO_ReadWriteBlock_DMA(block, NULL, dst)) return true;
return false;
}
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
uint8_t retries = SDIO_READ_RETRIES;
while (retries--) if (SDIO_ReadWriteBlock_DMA(block, src, NULL)) return true;
return false;
}
#if defined(STM32F1xx)
#define DMA_IRQ_HANDLER DMA2_Channel4_5_IRQHandler
#elif defined(STM32F4xx)
#define DMA_IRQ_HANDLER DMA2_Stream3_IRQHandler
#else
#error "Unknown STM32 architecture."
#endif
extern "C" void SDIO_IRQHandler(void) { HAL_SD_IRQHandler(&hsd); }
extern "C" void DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&hdma_sdio); }
#endif // !USBD_USE_CDC_COMPOSITE
#endif // SDIO_SUPPORT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/Servo.cpp
+110
View File
@@ -0,0 +1,110 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "Servo.h"
static uint_fast8_t servoCount = 0;
static libServo *servos[NUM_SERVOS] = {0};
constexpr millis_t servoDelay[] = SERVO_DELAY;
static_assert(COUNT(servoDelay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
// Initialize to the default timer priority. This will be overridden by a call from timers.cpp.
// This allows all timer interrupt priorities to be managed from a single location in the HAL.
static uint32_t servo_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), TIM_IRQ_PRIO, TIM_IRQ_SUBPRIO);
// This must be called after the STM32 Servo class has intialized the timer.
// It may only be needed after the first call to attach(), but it is possible
// that is is necessary after every detach() call. To be safe this is currently
// called after every call to attach().
static void fixServoTimerInterruptPriority() {
NVIC_SetPriority(getTimerUpIrq(TIMER_SERVO), servo_interrupt_priority);
}
libServo::libServo()
: delay(servoDelay[servoCount]),
was_attached_before_pause(false),
value_before_pause(0)
{
servos[servoCount++] = this;
}
int8_t libServo::attach(const int pin) {
if (servoCount >= MAX_SERVOS) return -1;
if (pin > 0) servo_pin = pin;
auto result = stm32_servo.attach(servo_pin);
fixServoTimerInterruptPriority();
return result;
}
int8_t libServo::attach(const int pin, const int min, const int max) {
if (servoCount >= MAX_SERVOS) return -1;
if (pin > 0) servo_pin = pin;
auto result = stm32_servo.attach(servo_pin, min, max);
fixServoTimerInterruptPriority();
return result;
}
void libServo::move(const int value) {
if (attach(0) >= 0) {
stm32_servo.write(value);
safe_delay(delay);
TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
}
}
void libServo::pause() {
was_attached_before_pause = stm32_servo.attached();
if (was_attached_before_pause) {
value_before_pause = stm32_servo.read();
stm32_servo.detach();
}
}
void libServo::resume() {
if (was_attached_before_pause) {
attach();
move(value_before_pause);
}
}
void libServo::pause_all_servos() {
for (auto& servo : servos)
if (servo) servo->pause();
}
void libServo::resume_all_servos() {
for (auto& servo : servos)
if (servo) servo->resume();
}
void libServo::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) {
servo_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority);
}
#endif // HAS_SERVOS
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/Servo.h
+54
View File
@@ -0,0 +1,54 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <Servo.h>
#include "../../core/millis_t.h"
// Inherit and expand on the official library
class libServo {
public:
libServo();
int8_t attach(const int pin = 0); // pin == 0 uses value from previous call
int8_t attach(const int pin, const int min, const int max);
void detach() { stm32_servo.detach(); }
int read() { return stm32_servo.read(); }
void move(const int value);
void pause();
void resume();
static void pause_all_servos();
static void resume_all_servos();
static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
private:
Servo stm32_servo;
int servo_pin = 0;
millis_t delay = 0;
bool was_attached_before_pause;
int value_before_pause;
};
Marlin/src/HAL/STM32/eeprom_flash.cpp
+269
View File
@@ -0,0 +1,269 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#if ENABLED(FLASH_EEPROM_EMULATION)
#include "../shared/eeprom_api.h"
/**
* The STM32 HAL supports chips that deal with "pages" and some with "sectors" and some that
* even have multiple "banks" of flash.
*
* This code is a bit of a mashup of
* framework-arduinoststm32/cores/arduino/stm32/stm32_eeprom.c
* hal/hal_lpc1768/persistent_store_flash.cpp
*
* This has only be written against those that use a single "sector" design.
*
* Those that deal with "pages" could be made to work. Looking at the STM32F07 for example, there are
* 128 "pages", each 2kB in size. If we continued with our EEPROM being 4Kb, we'd always need to operate
* on 2 of these pages. Each write, we'd use 2 different pages from a pool of pages until we are done.
*/
#if ENABLED(FLASH_EEPROM_LEVELING)
#include "stm32_def.h"
#define DEBUG_OUT ENABLED(EEPROM_CHITCHAT)
#include "../../core/debug_out.h"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif
#ifndef FLASH_SECTOR
#define FLASH_SECTOR (FLASH_SECTOR_TOTAL - 1)
#endif
#ifndef FLASH_UNIT_SIZE
#define FLASH_UNIT_SIZE 0x20000 // 128kB
#endif
#ifndef FLASH_ADDRESS_START
#define FLASH_ADDRESS_START (FLASH_END - ((FLASH_SECTOR_TOTAL - (FLASH_SECTOR)) * (FLASH_UNIT_SIZE)) + 1)
#endif
#define FLASH_ADDRESS_END (FLASH_ADDRESS_START + FLASH_UNIT_SIZE - 1)
#define EEPROM_SLOTS ((FLASH_UNIT_SIZE) / (MARLIN_EEPROM_SIZE))
#define SLOT_ADDRESS(slot) (FLASH_ADDRESS_START + (slot * (MARLIN_EEPROM_SIZE)))
#define UNLOCK_FLASH() if (!flash_unlocked) { \
HAL_FLASH_Unlock(); \
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | \
FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR); \
flash_unlocked = true; \
}
#define LOCK_FLASH() if (flash_unlocked) { HAL_FLASH_Lock(); flash_unlocked = false; }
#define EMPTY_UINT32 ((uint32_t)-1)
#define EMPTY_UINT8 ((uint8_t)-1)
static uint8_t ram_eeprom[MARLIN_EEPROM_SIZE] __attribute__((aligned(4))) = {0};
static int current_slot = -1;
static_assert(0 == MARLIN_EEPROM_SIZE % 4, "MARLIN_EEPROM_SIZE must be a multiple of 4"); // Ensure copying as uint32_t is safe
static_assert(0 == FLASH_UNIT_SIZE % MARLIN_EEPROM_SIZE, "MARLIN_EEPROM_SIZE must divide evenly into your FLASH_UNIT_SIZE");
static_assert(FLASH_UNIT_SIZE >= MARLIN_EEPROM_SIZE, "FLASH_UNIT_SIZE must be greater than or equal to your MARLIN_EEPROM_SIZE");
static_assert(IS_FLASH_SECTOR(FLASH_SECTOR), "FLASH_SECTOR is invalid");
static_assert(IS_POWER_OF_2(FLASH_UNIT_SIZE), "FLASH_UNIT_SIZE should be a power of 2, please check your chip's spec sheet");
#endif
static bool eeprom_data_written = false;
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE size_t(E2END + 1)
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() {
#if ENABLED(FLASH_EEPROM_LEVELING)
if (current_slot == -1 || eeprom_data_written) {
// This must be the first time since power on that we have accessed the storage, or someone
// loaded and called write_data and never called access_finish.
// Lets go looking for the slot that holds our configuration.
if (eeprom_data_written) DEBUG_ECHOLNPGM("Dangling EEPROM write_data");
uint32_t address = FLASH_ADDRESS_START;
while (address <= FLASH_ADDRESS_END) {
uint32_t address_value = (*(__IO uint32_t*)address);
if (address_value != EMPTY_UINT32) {
current_slot = (address - (FLASH_ADDRESS_START)) / (MARLIN_EEPROM_SIZE);
break;
}
address += sizeof(uint32_t);
}
if (current_slot == -1) {
// We didn't find anything, so we'll just intialize to empty
for (int i = 0; i < MARLIN_EEPROM_SIZE; i++) ram_eeprom[i] = EMPTY_UINT8;
current_slot = EEPROM_SLOTS;
}
else {
// load current settings
uint8_t *eeprom_data = (uint8_t *)SLOT_ADDRESS(current_slot);
for (int i = 0; i < MARLIN_EEPROM_SIZE; i++) ram_eeprom[i] = eeprom_data[i];
DEBUG_ECHOLNPAIR("EEPROM loaded from slot ", current_slot, ".");
}
eeprom_data_written = false;
}
#else
eeprom_buffer_fill();
#endif
return true;
}
bool PersistentStore::access_finish() {
if (eeprom_data_written) {
#ifdef STM32F4xx
// MCU may come up with flash error bits which prevent some flash operations.
// Clear flags prior to flash operations to prevent errors.
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR);
#endif
#if ENABLED(FLASH_EEPROM_LEVELING)
HAL_StatusTypeDef status = HAL_ERROR;
bool flash_unlocked = false;
if (--current_slot < 0) {
// all slots have been used, erase everything and start again
FLASH_EraseInitTypeDef EraseInitStruct;
uint32_t SectorError = 0;
EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS;
EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3;
EraseInitStruct.Sector = FLASH_SECTOR;
EraseInitStruct.NbSectors = 1;
current_slot = EEPROM_SLOTS - 1;
UNLOCK_FLASH();
TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
DISABLE_ISRS();
status = HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError);
ENABLE_ISRS();
TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
if (status != HAL_OK) {
DEBUG_ECHOLNPAIR("HAL_FLASHEx_Erase=", status);
DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPAIR("SectorError=", SectorError);
LOCK_FLASH();
return false;
}
}
UNLOCK_FLASH();
uint32_t offset = 0;
uint32_t address = SLOT_ADDRESS(current_slot);
uint32_t address_end = address + MARLIN_EEPROM_SIZE;
uint32_t data = 0;
bool success = true;
while (address < address_end) {
memcpy(&data, ram_eeprom + offset, sizeof(uint32_t));
status = HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, address, data);
if (status == HAL_OK) {
address += sizeof(uint32_t);
offset += sizeof(uint32_t);
}
else {
DEBUG_ECHOLNPAIR("HAL_FLASH_Program=", status);
DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPAIR("address=", address);
success = false;
break;
}
}
LOCK_FLASH();
if (success) {
eeprom_data_written = false;
DEBUG_ECHOLNPAIR("EEPROM saved to slot ", current_slot, ".");
}
return success;
#else
// The following was written for the STM32F4 but may work with other MCUs as well.
// Most STM32F4 flash does not allow reading from flash during erase operations.
// This takes about a second on a STM32F407 with a 128kB sector used as EEPROM.
// Interrupts during this time can have unpredictable results, such as killing Servo
// output. Servo output still glitches with interrupts disabled, but recovers after the
// erase.
TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
DISABLE_ISRS();
eeprom_buffer_flush();
ENABLE_ISRS();
TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
eeprom_data_written = false;
#endif
}
return true;
}
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
while (size--) {
uint8_t v = *value;
#if ENABLED(FLASH_EEPROM_LEVELING)
if (v != ram_eeprom[pos]) {
ram_eeprom[pos] = v;
eeprom_data_written = true;
}
#else
if (v != eeprom_buffered_read_byte(pos)) {
eeprom_buffered_write_byte(pos, v);
eeprom_data_written = true;
}
#endif
crc16(crc, &v, 1);
pos++;
value++;
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
const uint8_t c = TERN(FLASH_EEPROM_LEVELING, ram_eeprom[pos], eeprom_buffered_read_byte(pos));
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
#endif // FLASH_EEPROM_EMULATION
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/eeprom_sdcard.cpp
+91
View File
@@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
/**
* Implementation of EEPROM settings in SD Card
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(SDCARD_EEPROM_EMULATION)
#include "../shared/eeprom_api.h"
#include "../../sd/cardreader.h"
#define EEPROM_FILENAME "eeprom.dat"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
#define _ALIGN(x) __attribute__ ((aligned(x)))
static char _ALIGN(4) HAL_eeprom_data[MARLIN_EEPROM_SIZE];
bool PersistentStore::access_start() {
if (!card.isMounted()) return false;
SdFile file, root = card.getroot();
if (!file.open(&root, EEPROM_FILENAME, O_RDONLY))
return true;
int bytes_read = file.read(HAL_eeprom_data, MARLIN_EEPROM_SIZE);
if (bytes_read < 0) return false;
for (; bytes_read < MARLIN_EEPROM_SIZE; bytes_read++)
HAL_eeprom_data[bytes_read] = 0xFF;
file.close();
return true;
}
bool PersistentStore::access_finish() {
if (!card.isMounted()) return false;
SdFile file, root = card.getroot();
int bytes_written = 0;
if (file.open(&root, EEPROM_FILENAME, O_CREAT | O_WRITE | O_TRUNC)) {
bytes_written = file.write(HAL_eeprom_data, MARLIN_EEPROM_SIZE);
file.close();
}
return (bytes_written == MARLIN_EEPROM_SIZE);
}
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
for (size_t i = 0; i < size; i++)
HAL_eeprom_data[pos + i] = value[i];
crc16(crc, value, size);
pos += size;
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
for (size_t i = 0; i < size; i++) {
uint8_t c = HAL_eeprom_data[pos + i];
if (writing) value[i] = c;
crc16(crc, &c, 1);
}
pos += size;
return false;
}
#endif // SDCARD_EEPROM_EMULATION
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/eeprom_sram.cpp
+68
View File
@@ -0,0 +1,68 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#if ENABLED(SRAM_EEPROM_EMULATION)
#include "../shared/eeprom_if.h"
#include "../shared/eeprom_api.h"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
while (size--) {
uint8_t v = *value;
// Save to Backup SRAM
*(__IO uint8_t *)(BKPSRAM_BASE + (uint8_t * const)pos) = v;
crc16(crc, &v, 1);
pos++;
value++;
};
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
// Read from either external EEPROM, program flash or Backup SRAM
const uint8_t c = ( *(__IO uint8_t *)(BKPSRAM_BASE + ((uint8_t*)pos)) );
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
#endif // SRAM_EEPROM_EMULATION
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/eeprom_wired.cpp
+78
View File
@@ -0,0 +1,78 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
/**
* PersistentStore for Arduino-style EEPROM interface
* with simple implementations supplied by Marlin.
*/
#include "../shared/eeprom_if.h"
#include "../shared/eeprom_api.h"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE size_t(E2END + 1)
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t v = *value;
uint8_t * const p = (uint8_t * const)pos;
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
do {
// Read from either external EEPROM, program flash or Backup SRAM
const uint8_t c = eeprom_read_byte((uint8_t*)pos);
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
#endif // USE_WIRED_EEPROM
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/endstop_interrupts.h
+49
View File
@@ -0,0 +1,49 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../module/endstops.h"
// One ISR for all EXT-Interrupts
void endstop_ISR() { endstops.update(); }
void setup_endstop_interrupts() {
#define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
}
Marlin/src/HAL/STM32/fast_pwm.cpp
+59
View File
@@ -0,0 +1,59 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfigPre.h"
#if NEEDS_HARDWARE_PWM
#include "HAL.h"
#include "timers.h"
void set_pwm_frequency(const pin_t pin, int f_desired) {
if (!PWM_PIN(pin)) return; // Don't proceed if no hardware timer
PinName pin_name = digitalPinToPinName(pin);
TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM); // Get HAL timer instance
LOOP_S_L_N(i, 0, NUM_HARDWARE_TIMERS) // Protect used timers
if (timer_instance[i] && timer_instance[i]->getHandle()->Instance == Instance)
return;
pwm_start(pin_name, f_desired, 0, RESOLUTION_8B_COMPARE_FORMAT);
}
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
PinName pin_name = digitalPinToPinName(pin);
TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM);
uint16_t adj_val = Instance->ARR * v / v_size;
if (invert) adj_val = Instance->ARR - adj_val;
switch (get_pwm_channel(pin_name)) {
case TIM_CHANNEL_1: LL_TIM_OC_SetCompareCH1(Instance, adj_val); break;
case TIM_CHANNEL_2: LL_TIM_OC_SetCompareCH2(Instance, adj_val); break;
case TIM_CHANNEL_3: LL_TIM_OC_SetCompareCH3(Instance, adj_val); break;
case TIM_CHANNEL_4: LL_TIM_OC_SetCompareCH4(Instance, adj_val); break;
}
}
#endif // NEEDS_HARDWARE_PWM
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/fastio.cpp
+34
View File
@@ -0,0 +1,34 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfig.h"
GPIO_TypeDef* FastIOPortMap[LastPort + 1];
void FastIO_init() {
LOOP_L_N(i, NUM_DIGITAL_PINS)
FastIOPortMap[STM_PORT(digitalPin[i])] = get_GPIO_Port(STM_PORT(digitalPin[i]));
}
#endif
Marlin/src/HAL/STM32/fastio.h
+90
View File
@@ -0,0 +1,90 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast I/O interfaces for STM32
* These use GPIO register access for fast port manipulation.
*/
// ------------------------
// Public Variables
// ------------------------
extern GPIO_TypeDef * FastIOPortMap[];
// ------------------------
// Public functions
// ------------------------
void FastIO_init(); // Must be called before using fast io macros
// ------------------------
// Defines
// ------------------------
#define _BV32(b) (1UL << (b))
#ifndef PWM
#define PWM OUTPUT
#endif
#if defined(STM32F0xx) || defined(STM32F1xx) || defined(STM32F3xx) || defined(STM32L0xx) || defined(STM32L4xx)
#define _WRITE(IO, V) do { \
if (V) FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
else FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
}while(0)
#else
#define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO)) + ((V) ? 0 : 16)))
#endif
#define _READ(IO) bool(READ_BIT(FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->IDR, _BV32(STM_PIN(digitalPinToPinName(IO)))))
#define _TOGGLE(IO) TBI32(FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->ODR, STM_PIN(digitalPinToPinName(IO)))
#define _GET_MODE(IO)
#define _SET_MODE(IO,M) pinMode(IO, M)
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) //!< Output Push Pull Mode & GPIO_NOPULL
#define _SET_OUTPUT_OD(IO) pinMode(IO, OUTPUT_OPEN_DRAIN)
#define WRITE(IO,V) _WRITE(IO,V)
#define READ(IO) _READ(IO)
#define TOGGLE(IO) _TOGGLE(IO)
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
#define SET_INPUT(IO) _SET_MODE(IO, INPUT) //!< Input Floating Mode
#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) //!< Input with Pull-up activation
#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) //!< Input with Pull-down activation
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
#define SET_PWM(IO) _SET_MODE(IO, PWM)
#define IS_INPUT(IO)
#define IS_OUTPUT(IO)
#define PWM_PIN(P) digitalPinHasPWM(P)
#define NO_COMPILE_TIME_PWM
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
Marlin/src/HAL/STM32/inc/Conditionals_LCD.h
+22
View File
@@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
Marlin/src/HAL/STM32/inc/Conditionals_adv.h
+32
View File
@@ -0,0 +1,32 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if defined(USBD_USE_CDC_MSC) && DISABLED(NO_SD_HOST_DRIVE)
#define HAS_SD_HOST_DRIVE 1
#endif
// Fix F_CPU not being a compile-time constant in STSTM32 framework
#ifdef BOARD_F_CPU
#undef F_CPU
#define F_CPU BOARD_F_CPU
#endif
Marlin/src/HAL/STM32/inc/Conditionals_post.h
+29
View File
@@ -0,0 +1,29 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
// If no real or emulated EEPROM selected, fall back to SD emulation
#if USE_FALLBACK_EEPROM
#define SDCARD_EEPROM_EMULATION
#elif EITHER(I2C_EEPROM, SPI_EEPROM)
#define USE_SHARED_EEPROM 1
#endif
Marlin/src/HAL/STM32/inc/SanityCheck.h
+57
View File
@@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Test STM32-specific configuration values for errors at compile-time.
*/
//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
//#endif
#if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
#undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
#if USE_FALLBACK_EEPROM
#warning "EEPROM type not specified. Fallback is SDCARD_EEPROM_EMULATION."
#endif
#error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
#endif
#if defined(STM32F4xx) && BOTH(PRINTCOUNTER, FLASH_EEPROM_EMULATION)
#warning "FLASH_EEPROM_EMULATION may cause long delays when writing and should not be used while printing."
#error "Disable PRINTCOUNTER or choose another EEPROM emulation."
#endif
#if !defined(STM32F4xx) && ENABLED(FLASH_EEPROM_LEVELING)
#error "FLASH_EEPROM_LEVELING is currently only supported on STM32F4 hardware."
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on STM32."
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on STM32."
#endif
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32H7xx, STM32F4xx, STM32F1xx)
#error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32H7, STM32F4 and STM32F1 hardware."
#endif
Marlin/src/HAL/STM32/msc_sd.cpp
+124
View File
@@ -0,0 +1,124 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 BigTreeTech [https://github.com/bigtreetech]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && HAS_SD_HOST_DRIVE
#include "msc_sd.h"
#include "../shared/Marduino.h"
#include "usbd_core.h"
#include <USB.h>
#include <USBMscHandler.h>
#define BLOCK_SIZE 512
#define PRODUCT_ID 0x29
#include "../../sd/cardreader.h"
class Sd2CardUSBMscHandler : public USBMscHandler {
public:
DiskIODriver* diskIODriver() {
#if ENABLED(MULTI_VOLUME)
#if SHARED_VOLUME_IS(SD_ONBOARD)
return &card.media_sd_spi;
#elif SHARED_VOLUME_IS(USB_FLASH_DRIVE)
return &card.media_usbFlashDrive;
#endif
#else
return card.diskIODriver();
#endif
}
bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) {
*pBlockNum = diskIODriver()->cardSize();
*pBlockSize = BLOCK_SIZE;
return true;
}
bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
auto sd2card = diskIODriver();
// single block
if (blkLen == 1) {
watchdog_refresh();
sd2card->writeBlock(blkAddr, pBuf);
return true;
}
// multi block optmization
sd2card->writeStart(blkAddr, blkLen);
while (blkLen--) {
watchdog_refresh();
sd2card->writeData(pBuf);
pBuf += BLOCK_SIZE;
}
sd2card->writeStop();
return true;
}
bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
auto sd2card = diskIODriver();
// single block
if (blkLen == 1) {
watchdog_refresh();
sd2card->readBlock(blkAddr, pBuf);
return true;
}
// multi block optmization
sd2card->readStart(blkAddr);
while (blkLen--) {
watchdog_refresh();
sd2card->readData(pBuf);
pBuf += BLOCK_SIZE;
}
sd2card->readStop();
return true;
}
bool IsReady() {
return diskIODriver()->isReady();
}
};
Sd2CardUSBMscHandler usbMscHandler;
/* USB Mass storage Standard Inquiry Data */
uint8_t Marlin_STORAGE_Inquirydata[] = { /* 36 */
/* LUN 0 */
0x00,
0x80,
0x02,
0x02,
(STANDARD_INQUIRY_DATA_LEN - 5),
0x00,
0x00,
0x00,
'M', 'A', 'R', 'L', 'I', 'N', ' ', ' ', /* Manufacturer : 8 bytes */
'P', 'r', 'o', 'd', 'u', 'c', 't', ' ', /* Product : 16 Bytes */
' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
'0', '.', '0', '1', /* Version : 4 Bytes */
};
USBMscHandler *pSingleMscHandler = &usbMscHandler;
void MSC_SD_init() {
USBDevice.end();
delay(200);
USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata);
USBDevice.begin();
}
#endif // __STM32F1__ && HAS_SD_HOST_DRIVE
Marlin/src/HAL/STM32/msc_sd.h
+18
View File
@@ -0,0 +1,18 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2019 BigTreeTech [https://github.com/bigtreetech]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
void MSC_SD_init();
Marlin/src/HAL/STM32/pinsDebug.h
+264
View File
@@ -0,0 +1,264 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <Arduino.h>
#ifndef NUM_DIGITAL_PINS
// Only in ST's Arduino core (STM32duino, STM32Core)
#error "Expected NUM_DIGITAL_PINS not found"
#endif
/**
* Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order)
* because the variants in this platform do not always define all the I/O port/pins
* that a CPU has.
*
* VARIABLES:
* Ard_num - Arduino pin number - defined by the platform. It is used by digitalRead and
* digitalWrite commands and by M42.
* - does not contain port/pin info
* - is not in port/pin order
* - typically a variant will only assign Ard_num to port/pins that are actually used
* Index - M43 counter - only used to get Ard_num
* x - a parameter/argument used to search the pin_array to try to find a signal name
* associated with a Ard_num
* Port_pin - port number and pin number for use with CPU registers and printing reports
*
* Since M43 uses digitalRead and digitalWrite commands, only the Port_pins with an Ard_num
* are accessed and/or displayed.
*
* Three arrays are used.
*
* digitalPin[] is provided by the platform. It consists of the Port_pin numbers in
* Arduino pin number order.
*
* pin_array is a structure generated by the pins/pinsDebug.h header file. It is generated by
* the preprocessor. Only the signals associated with enabled options are in this table.
* It contains:
* - name of the signal
* - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines.
* EXAMPLE: "#define KILL_PIN PB1" results in Ard_num of 57. 57 is then used as the
* argument to digitalPinToPinName(IO) to get the Port_pin number
* - if it is a digital or analog signal. PWMs are considered digital here.
*
* pin_xref is a structure generated by this header file. It is generated by the
* preprocessor. It is in port/pin order. It contains just the port/pin numbers defined by the
* platform for this variant.
* - Ard_num
* - printable version of Port_pin
*
* Routines with an "x" as a parameter/argument are used to search the pin_array to try to
* find a signal name associated with a port/pin.
*
* NOTE - the Arduino pin number is what is used by the M42 command, NOT the port/pin for that
* signal. The Arduino pin number is listed by the M43 I command.
*/
////////////////////////////////////////////////////////
//
// make a list of the Arduino pin numbers in the Port/Pin order
//
#define _PIN_ADD_2(NAME_ALPHA, ARDUINO_NUM) { {NAME_ALPHA}, ARDUINO_NUM },
#define _PIN_ADD(NAME_ALPHA, ARDUINO_NUM) { NAME_ALPHA, ARDUINO_NUM },
#define PIN_ADD(NAME) _PIN_ADD(#NAME, NAME)
typedef struct {
char Port_pin_alpha[5];
pin_t Ard_num;
} XrefInfo;
const XrefInfo pin_xref[] PROGMEM = {
#include "pins_Xref.h"
};
////////////////////////////////////////////////////////////
#define MODE_PIN_INPUT 0 // Input mode (reset state)
#define MODE_PIN_OUTPUT 1 // General purpose output mode
#define MODE_PIN_ALT 2 // Alternate function mode
#define MODE_PIN_ANALOG 3 // Analog mode
#define PIN_NUM(P) (P & 0x000F)
#define PIN_NUM_ALPHA_LEFT(P) (((P & 0x000F) < 10) ? ('0' + (P & 0x000F)) : '1')
#define PIN_NUM_ALPHA_RIGHT(P) (((P & 0x000F) > 9) ? ('0' + (P & 0x000F) - 10) : 0 )
#define PORT_NUM(P) ((P >> 4) & 0x0007)
#define PORT_ALPHA(P) ('A' + (P >> 4))
/**
* Translation of routines & variables used by pinsDebug.h
*/
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL)
#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num) // must use Arduino pin numbers when doing reads
#define PRINT_PIN(Q)
#define PRINT_PORT(ANUM) port_print(ANUM)
#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1 // will report analog pin number in the print port routine
#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num
// x is a variable used to search pin_array
#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin
#ifndef M43_NEVER_TOUCH
#define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP)
#ifdef KILL_PIN
#define M43_NEVER_TOUCH(Index) m43_never_touch(Index)
bool m43_never_touch(const pin_t Index) {
static pin_t M43_kill_index = -1;
if (M43_kill_index < 0)
for (M43_kill_index = 0; M43_kill_index < NUMBER_PINS_TOTAL; M43_kill_index++)
if (KILL_PIN == GET_PIN_MAP_PIN_M43(M43_kill_index)) break;
return _M43_NEVER_TOUCH(Index) || Index == M43_kill_index; // KILL_PIN and SERIAL/USB
}
#else
#define M43_NEVER_TOUCH(Index) _M43_NEVER_TOUCH(Index)
#endif
#endif
uint8_t get_pin_mode(const pin_t Ard_num) {
const PinName dp = digitalPinToPinName(Ard_num);
uint32_t ll_pin = STM_LL_GPIO_PIN(dp);
GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(dp));
uint32_t mode = LL_GPIO_GetPinMode(port, ll_pin);
switch (mode) {
case LL_GPIO_MODE_ANALOG: return MODE_PIN_ANALOG;
case LL_GPIO_MODE_INPUT: return MODE_PIN_INPUT;
case LL_GPIO_MODE_OUTPUT: return MODE_PIN_OUTPUT;
case LL_GPIO_MODE_ALTERNATE: return MODE_PIN_ALT;
TERN_(STM32F1xx, case LL_GPIO_MODE_FLOATING:)
default: return 0;
}
}
bool GET_PINMODE(const pin_t Ard_num) {
const uint8_t pin_mode = get_pin_mode(Ard_num);
return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT; // assume all alt definitions are PWM
}
int8_t digital_pin_to_analog_pin(pin_t Ard_num) {
Ard_num -= NUM_ANALOG_FIRST;
return (Ard_num >= 0 && Ard_num < NUM_ANALOG_INPUTS) ? Ard_num : -1;
}
bool IS_ANALOG(const pin_t Ard_num) {
return get_pin_mode(Ard_num) == MODE_PIN_ANALOG;
}
bool is_digital(const pin_t x) {
const uint8_t pin_mode = get_pin_mode(pin_array[x].pin);
return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT;
}
void port_print(const pin_t Ard_num) {
char buffer[16];
pin_t Index;
for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++)
if (Ard_num == GET_PIN_MAP_PIN_M43(Index)) break;
const char * ppa = pin_xref[Index].Port_pin_alpha;
sprintf_P(buffer, PSTR("%s"), ppa);
SERIAL_ECHO(buffer);
if (ppa[3] == '\0') SERIAL_CHAR(' ');
// print analog pin number
const int8_t Port_pin = digital_pin_to_analog_pin(Ard_num);
if (Port_pin >= 0) {
sprintf_P(buffer, PSTR(" (A%d) "), Port_pin);
SERIAL_ECHO(buffer);
if (Port_pin < 10) SERIAL_CHAR(' ');
}
else
SERIAL_ECHO_SP(7);
// Print number to be used with M42
sprintf_P(buffer, PSTR(" M42 P%d "), Ard_num);
SERIAL_ECHO(buffer);
if (Ard_num < 10) SERIAL_CHAR(' ');
if (Ard_num < 100) SERIAL_CHAR(' ');
}
bool pwm_status(const pin_t Ard_num) {
return get_pin_mode(Ard_num) == MODE_PIN_ALT;
}
void pwm_details(const pin_t Ard_num) {
#ifndef STM32F1xx
if (pwm_status(Ard_num)) {
uint32_t alt_all = 0;
const PinName dp = digitalPinToPinName(Ard_num);
pin_t pin_number = uint8_t(PIN_NUM(dp));
const bool over_7 = pin_number >= 8;
const uint8_t ind = over_7 ? 1 : 0;
switch (PORT_ALPHA(dp)) { // get alt function
case 'A' : alt_all = GPIOA->AFR[ind]; break;
case 'B' : alt_all = GPIOB->AFR[ind]; break;
case 'C' : alt_all = GPIOC->AFR[ind]; break;
case 'D' : alt_all = GPIOD->AFR[ind]; break;
#ifdef PE_0
case 'E' : alt_all = GPIOE->AFR[ind]; break;
#elif defined (PF_0)
case 'F' : alt_all = GPIOF->AFR[ind]; break;
#elif defined (PG_0)
case 'G' : alt_all = GPIOG->AFR[ind]; break;
#elif defined (PH_0)
case 'H' : alt_all = GPIOH->AFR[ind]; break;
#elif defined (PI_0)
case 'I' : alt_all = GPIOI->AFR[ind]; break;
#elif defined (PJ_0)
case 'J' : alt_all = GPIOJ->AFR[ind]; break;
#elif defined (PK_0)
case 'K' : alt_all = GPIOK->AFR[ind]; break;
#elif defined (PL_0)
case 'L' : alt_all = GPIOL->AFR[ind]; break;
#endif
}
if (over_7) pin_number -= 8;
uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F;
SERIAL_ECHOPAIR("Alt Function: ", alt_func);
if (alt_func < 10) SERIAL_CHAR(' ');
SERIAL_ECHOPGM(" - ");
switch (alt_func) {
case 0 : SERIAL_ECHOPGM("system (misc. I/O)"); break;
case 1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break;
case 2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break;
case 3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break;
case 4 : SERIAL_ECHOPGM("I2C1..3"); break;
case 5 : SERIAL_ECHOPGM("SPI1/SPI2"); break;
case 6 : SERIAL_ECHOPGM("SPI3"); break;
case 7 : SERIAL_ECHOPGM("USART1..3"); break;
case 8 : SERIAL_ECHOPGM("USART4..6"); break;
case 9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14 (probably PWM)"); break;
case 10 : SERIAL_ECHOPGM("OTG"); break;
case 11 : SERIAL_ECHOPGM("ETH"); break;
case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break;
case 13 : SERIAL_ECHOPGM("DCMI"); break;
case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break;
case 15 : SERIAL_ECHOPGM("EVENTOUT"); break;
}
}
#else
// TODO: F1 doesn't support changing pins function, so we need to check the function of the PIN and if it's enabled
#endif
} // pwm_details
Marlin/src/HAL/STM32/pins_Xref.h
+612
View File
@@ -0,0 +1,612 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
//
// make a list of the Arduino pin numbers in the Port/Pin order
//
#ifdef PA0
PIN_ADD(PA0)
#endif
#ifdef PA1
PIN_ADD(PA1)
#endif
#ifdef PA2
PIN_ADD(PA2)
#endif
#ifdef PA3
PIN_ADD(PA3)
#endif
#ifdef PA4
PIN_ADD(PA4)
#endif
#ifdef PA5
PIN_ADD(PA5)
#endif
#ifdef PA6
PIN_ADD(PA6)
#endif
#ifdef PA7
PIN_ADD(PA7)
#endif
#ifdef PA8
PIN_ADD(PA8)
#endif
#ifdef PA9
PIN_ADD(PA9)
#endif
#ifdef PA10
PIN_ADD(PA10)
#endif
#ifdef PA11
PIN_ADD(PA11)
#endif
#ifdef PA12
PIN_ADD(PA12)
#endif
#ifdef PA13
PIN_ADD(PA13)
#endif
#ifdef PA14
PIN_ADD(PA14)
#endif
#ifdef PA15
PIN_ADD(PA15)
#endif
#ifdef PB0
PIN_ADD(PB0)
#endif
#ifdef PB1
PIN_ADD(PB1)
#endif
#ifdef PB2
PIN_ADD(PB2)
#endif
#ifdef PB3
PIN_ADD(PB3)
#endif
#ifdef PB4
PIN_ADD(PB4)
#endif
#ifdef PB5
PIN_ADD(PB5)
#endif
#ifdef PB6
PIN_ADD(PB6)
#endif
#ifdef PB7
PIN_ADD(PB7)
#endif
#ifdef PB8
PIN_ADD(PB8)
#endif
#ifdef PB9
PIN_ADD(PB9)
#endif
#ifdef PB10
PIN_ADD(PB10)
#endif
#ifdef PB11
PIN_ADD(PB11)
#endif
#ifdef PB12
PIN_ADD(PB12)
#endif
#ifdef PB13
PIN_ADD(PB13)
#endif
#ifdef PB14
PIN_ADD(PB14)
#endif
#ifdef PB15
PIN_ADD(PB15)
#endif
#ifdef PC0
PIN_ADD(PC0)
#endif
#ifdef PC1
PIN_ADD(PC1)
#endif
#ifdef PC2
PIN_ADD(PC2)
#endif
#ifdef PC3
PIN_ADD(PC3)
#endif
#ifdef PC4
PIN_ADD(PC4)
#endif
#ifdef PC5
PIN_ADD(PC5)
#endif
#ifdef PC6
PIN_ADD(PC6)
#endif
#ifdef PC7
PIN_ADD(PC7)
#endif
#ifdef PC8
PIN_ADD(PC8)
#endif
#ifdef PC9
PIN_ADD(PC9)
#endif
#ifdef PC10
PIN_ADD(PC10)
#endif
#ifdef PC11
PIN_ADD(PC11)
#endif
#ifdef PC12
PIN_ADD(PC12)
#endif
#ifdef PC13
PIN_ADD(PC13)
#endif
#ifdef PC14
PIN_ADD(PC14)
#endif
#ifdef PC15
PIN_ADD(PC15)
#endif
#ifdef PD0
PIN_ADD(PD0)
#endif
#ifdef PD1
PIN_ADD(PD1)
#endif
#ifdef PD2
PIN_ADD(PD2)
#endif
#ifdef PD3
PIN_ADD(PD3)
#endif
#ifdef PD4
PIN_ADD(PD4)
#endif
#ifdef PD5
PIN_ADD(PD5)
#endif
#ifdef PD6
PIN_ADD(PD6)
#endif
#ifdef PD7
PIN_ADD(PD7)
#endif
#ifdef PD8
PIN_ADD(PD8)
#endif
#ifdef PD9
PIN_ADD(PD9)
#endif
#ifdef PD10
PIN_ADD(PD10)
#endif
#ifdef PD11
PIN_ADD(PD11)
#endif
#ifdef PD12
PIN_ADD(PD12)
#endif
#ifdef PD13
PIN_ADD(PD13)
#endif
#ifdef PD14
PIN_ADD(PD14)
#endif
#ifdef PD15
PIN_ADD(PD15)
#endif
#ifdef PE0
PIN_ADD(PE0)
#endif
#ifdef PE1
PIN_ADD(PE1)
#endif
#ifdef PE2
PIN_ADD(PE2)
#endif
#ifdef PE3
PIN_ADD(PE3)
#endif
#ifdef PE4
PIN_ADD(PE4)
#endif
#ifdef PE5
PIN_ADD(PE5)
#endif
#ifdef PE6
PIN_ADD(PE6)
#endif
#ifdef PE7
PIN_ADD(PE7)
#endif
#ifdef PE8
PIN_ADD(PE8)
#endif
#ifdef PE9
PIN_ADD(PE9)
#endif
#ifdef PE10
PIN_ADD(PE10)
#endif
#ifdef PE11
PIN_ADD(PE11)
#endif
#ifdef PE12
PIN_ADD(PE12)
#endif
#ifdef PE13
PIN_ADD(PE13)
#endif
#ifdef PE14
PIN_ADD(PE14)
#endif
#ifdef PE15
PIN_ADD(PE15)
#endif
#ifdef PF0
PIN_ADD(PF0)
#endif
#ifdef PF1
PIN_ADD(PF1)
#endif
#ifdef PF2
PIN_ADD(PF2)
#endif
#ifdef PF3
PIN_ADD(PF3)
#endif
#ifdef PF4
PIN_ADD(PF4)
#endif
#ifdef PF5
PIN_ADD(PF5)
#endif
#ifdef PF6
PIN_ADD(PF6)
#endif
#ifdef PF7
PIN_ADD(PF7)
#endif
#ifdef PF8
PIN_ADD(PF8)
#endif
#ifdef PF9
PIN_ADD(PF9)
#endif
#ifdef PF10
PIN_ADD(PF10)
#endif
#ifdef PF11
PIN_ADD(PF11)
#endif
#ifdef PF12
PIN_ADD(PF12)
#endif
#ifdef PF13
PIN_ADD(PF13)
#endif
#ifdef PF14
PIN_ADD(PF14)
#endif
#ifdef PF15
PIN_ADD(PF15)
#endif
#ifdef PG0
PIN_ADD(PG0)
#endif
#ifdef PG1
PIN_ADD(PG1)
#endif
#ifdef PG2
PIN_ADD(PG2)
#endif
#ifdef PG3
PIN_ADD(PG3)
#endif
#ifdef PG4
PIN_ADD(PG4)
#endif
#ifdef PG5
PIN_ADD(PG5)
#endif
#ifdef PG6
PIN_ADD(PG6)
#endif
#ifdef PG7
PIN_ADD(PG7)
#endif
#ifdef PG8
PIN_ADD(PG8)
#endif
#ifdef PG9
PIN_ADD(PG9)
#endif
#ifdef PG10
PIN_ADD(PG10)
#endif
#ifdef PG11
PIN_ADD(PG11)
#endif
#ifdef PG12
PIN_ADD(PG12)
#endif
#ifdef PG13
PIN_ADD(PG13)
#endif
#ifdef PG14
PIN_ADD(PG14)
#endif
#ifdef PG15
PIN_ADD(PG15)
#endif
#ifdef PH0
PIN_ADD(PH0)
#endif
#ifdef PH1
PIN_ADD(PH1)
#endif
#ifdef PH2
PIN_ADD(PH2)
#endif
#ifdef PH3
PIN_ADD(PH3)
#endif
#ifdef PH4
PIN_ADD(PH4)
#endif
#ifdef PH5
PIN_ADD(PH5)
#endif
#ifdef PH6
PIN_ADD(PH6)
#endif
#ifdef PH7
PIN_ADD(PH7)
#endif
#ifdef PH8
PIN_ADD(PH8)
#endif
#ifdef PH9
PIN_ADD(PH9)
#endif
#ifdef PH10
PIN_ADD(PH10)
#endif
#ifdef PH11
PIN_ADD(PH11)
#endif
#ifdef PH12
PIN_ADD(PH12)
#endif
#ifdef PH13
PIN_ADD(PH13)
#endif
#ifdef PH14
PIN_ADD(PH14)
#endif
#ifdef PH15
PIN_ADD(PH15)
#endif
#ifdef PI0
PIN_ADD(PI0)
#endif
#ifdef PI1
PIN_ADD(PI1)
#endif
#ifdef PI2
PIN_ADD(PI2)
#endif
#ifdef PI3
PIN_ADD(PI3)
#endif
#ifdef PI4
PIN_ADD(PI4)
#endif
#ifdef PI5
PIN_ADD(PI5)
#endif
#ifdef PI6
PIN_ADD(PI6)
#endif
#ifdef PI7
PIN_ADD(PI7)
#endif
#ifdef PI8
PIN_ADD(PI8)
#endif
#ifdef PI9
PIN_ADD(PI9)
#endif
#ifdef PI10
PIN_ADD(PI10)
#endif
#ifdef PI11
PIN_ADD(PI11)
#endif
#ifdef PI12
PIN_ADD(PI12)
#endif
#ifdef PI13
PIN_ADD(PI13)
#endif
#ifdef PI14
PIN_ADD(PI14)
#endif
#ifdef PI15
PIN_ADD(PI15)
#endif
#ifdef PJ0
PIN_ADD(PJ0)
#endif
#ifdef PJ1
PIN_ADD(PJ1)
#endif
#ifdef PJ2
PIN_ADD(PJ2)
#endif
#ifdef PJ3
PIN_ADD(PJ3)
#endif
#ifdef PJ4
PIN_ADD(PJ4)
#endif
#ifdef PJ5
PIN_ADD(PJ5)
#endif
#ifdef PJ6
PIN_ADD(PJ6)
#endif
#ifdef PJ7
PIN_ADD(PJ7)
#endif
#ifdef PJ8
PIN_ADD(PJ8)
#endif
#ifdef PJ9
PIN_ADD(PJ9)
#endif
#ifdef PJ10
PIN_ADD(PJ10)
#endif
#ifdef PJ11
PIN_ADD(PJ11)
#endif
#ifdef PJ12
PIN_ADD(PJ12)
#endif
#ifdef PJ13
PIN_ADD(PJ13)
#endif
#ifdef PJ14
PIN_ADD(PJ14)
#endif
#ifdef PJ15
PIN_ADD(PJ15)
#endif
#ifdef PK0
PIN_ADD(PK0)
#endif
#ifdef PK1
PIN_ADD(PK1)
#endif
#ifdef PK2
PIN_ADD(PK2)
#endif
#ifdef PK3
PIN_ADD(PK3)
#endif
#ifdef PK4
PIN_ADD(PK4)
#endif
#ifdef PK5
PIN_ADD(PK5)
#endif
#ifdef PK6
PIN_ADD(PK6)
#endif
#ifdef PK7
PIN_ADD(PK7)
#endif
#ifdef PK8
PIN_ADD(PK8)
#endif
#ifdef PK9
PIN_ADD(PK9)
#endif
#ifdef PK10
PIN_ADD(PK10)
#endif
#ifdef PK11
PIN_ADD(PK11)
#endif
#ifdef PK12
PIN_ADD(PK12)
#endif
#ifdef PK13
PIN_ADD(PK13)
#endif
#ifdef PK14
PIN_ADD(PK14)
#endif
#ifdef PK15
PIN_ADD(PK15)
#endif
#ifdef PL0
PIN_ADD(PL0)
#endif
#ifdef PL1
PIN_ADD(PL1)
#endif
#ifdef PL2
PIN_ADD(PL2)
#endif
#ifdef PL3
PIN_ADD(PL3)
#endif
#ifdef PL4
PIN_ADD(PL4)
#endif
#ifdef PL5
PIN_ADD(PL5)
#endif
#ifdef PL6
PIN_ADD(PL6)
#endif
#ifdef PL7
PIN_ADD(PL7)
#endif
#ifdef PL8
PIN_ADD(PL8)
#endif
#ifdef PL9
PIN_ADD(PL9)
#endif
#ifdef PL10
PIN_ADD(PL10)
#endif
#ifdef PL11
PIN_ADD(PL11)
#endif
#ifdef PL12
PIN_ADD(PL12)
#endif
#ifdef PL13
PIN_ADD(PL13)
#endif
#ifdef PL14
PIN_ADD(PL14)
#endif
#ifdef PL15
PIN_ADD(PL15)
#endif
Marlin/src/HAL/STM32/spi_pins.h
+35
View File
@@ -0,0 +1,35 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Define SPI Pins: SCK, MISO, MOSI, SS
*/
#ifndef SD_SCK_PIN
#define SD_SCK_PIN PIN_SPI_SCK
#endif
#ifndef SD_MISO_PIN
#define SD_MISO_PIN PIN_SPI_MISO
#endif
#ifndef SD_MOSI_PIN
#define SD_MOSI_PIN PIN_SPI_MOSI
#endif
#ifndef SD_SS_PIN
#define SD_SS_PIN PIN_SPI_SS
#endif
Marlin/src/HAL/STM32/tft/gt911.cpp
+202
View File
@@ -0,0 +1,202 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../../inc/MarlinConfig.h"
#if ENABLED(TFT_TOUCH_DEVICE_GT911)
#include "gt911.h"
#include "pinconfig.h"
SW_IIC::SW_IIC(uint16_t sda, uint16_t scl) {
scl_pin = scl;
sda_pin = sda;
}
// Software I2C hardware io init
void SW_IIC::init() {
OUT_WRITE(scl_pin, HIGH);
OUT_WRITE(sda_pin, HIGH);
}
// Software I2C start signal
void SW_IIC::start() {
write_sda(HIGH); // SDA = 1
write_scl(HIGH); // SCL = 1
iic_delay(2);
write_sda(LOW); // SDA = 0
iic_delay(1);
write_scl(LOW); // SCL = 0 // keep SCL low, avoid false stop caused by level jump caused by SDA switching IN/OUT
}
// Software I2C stop signal
void SW_IIC::stop() {
write_scl(LOW); // SCL = 0
iic_delay(2);
write_sda(LOW); // SDA = 0
iic_delay(2);
write_scl(HIGH); // SCL = 1
iic_delay(2);
write_sda(HIGH); // SDA = 1
}
// Software I2C sends ACK or NACK signal
void SW_IIC::send_ack(bool ack) {
write_sda(ack ? LOW : HIGH); // SDA = !ack
iic_delay(2);
write_scl(HIGH); // SCL = 1
iic_delay(2);
write_scl(LOW); // SCL = 0
}
// Software I2C read ACK or NACK signal
bool SW_IIC::read_ack() {
bool error = 0;
set_sda_in();
iic_delay(2);
write_scl(HIGH); // SCL = 1
error = read_sda();
iic_delay(2);
write_scl(LOW); // SCL = 0
set_sda_out();
return error;
}
void SW_IIC::send_byte(uint8_t txd) {
LOOP_L_N(i, 8) {
write_sda(txd & 0x80); // write data bit
txd <<= 1;
iic_delay(1);
write_scl(HIGH); // SCL = 1
iic_delay(2);
write_scl(LOW); // SCL = 0
iic_delay(1);
}
read_ack(); // wait ack
}
uint8_t SW_IIC::read_byte(bool ack) {
uint8_t data = 0;
set_sda_in();
LOOP_L_N(i, 8) {
write_scl(HIGH); // SCL = 1
iic_delay(1);
data <<= 1;
if (read_sda()) data++;
write_scl(LOW); // SCL = 0
iic_delay(2);
}
set_sda_out();
send_ack(ack);
return data;
}
GT911_REG_MAP GT911::reg;
SW_IIC GT911::sw_iic = SW_IIC(GT911_SW_I2C_SDA_PIN, GT911_SW_I2C_SCL_PIN);
void GT911::write_reg(uint16_t reg, uint8_t reg_len, uint8_t* w_data, uint8_t w_len) {
sw_iic.start();
sw_iic.send_byte(gt911_slave_address); // Set IIC Slave address
LOOP_L_N(i, reg_len) { // Set reg address
uint8_t r = (reg >> (8 * (reg_len - 1 - i))) & 0xFF;
sw_iic.send_byte(r);
}
LOOP_L_N(i, w_len) { // Write data to reg
sw_iic.send_byte(w_data[i]);
}
sw_iic.stop();
}
void GT911::read_reg(uint16_t reg, uint8_t reg_len, uint8_t* r_data, uint8_t r_len) {
sw_iic.start();
sw_iic.send_byte(gt911_slave_address); // Set IIC Slave address
LOOP_L_N(i, reg_len) { // Set reg address
uint8_t r = (reg >> (8 * (reg_len - 1 - i))) & 0xFF;
sw_iic.send_byte(r);
}
sw_iic.start();
sw_iic.send_byte(gt911_slave_address + 1); // Set read mode
LOOP_L_N(i, r_len) {
r_data[i] = sw_iic.read_byte(1); // Read data from reg
}
sw_iic.stop();
}
void GT911::Init() {
OUT_WRITE(GT911_RST_PIN, LOW);
OUT_WRITE(GT911_INT_PIN, LOW);
delay(20);
WRITE(GT911_RST_PIN, HIGH);
SET_INPUT(GT911_INT_PIN);
sw_iic.init();
uint8_t clear_reg = 0x0000;
write_reg(0x814E, 2, &clear_reg, 2); // Reset to 0 for start
}
bool GT911::getFirstTouchPoint(int16_t *x, int16_t *y) {
read_reg(0x814E, 2, &reg.REG.status, 1);
if (reg.REG.status & 0x80) {
uint8_t clear_reg = 0x00;
write_reg(0x814E, 2, &clear_reg, 1); // Reset to 0 for start
read_reg(0x8150, 2, reg.map + 2, 8 * (reg.REG.status & 0x0F));
// First touch point
*x = ((reg.REG.point[0].xh & 0x0F) << 8) | reg.REG.point[0].xl;
*y = ((reg.REG.point[0].yh & 0x0F) << 8) | reg.REG.point[0].yl;
return true;
}
return false;
}
bool GT911::getPoint(int16_t *x, int16_t *y) {
static bool touched = 0;
static int16_t read_x = 0, read_y = 0;
static millis_t next_time = 0;
if (ELAPSED(millis(), next_time)) {
touched = getFirstTouchPoint(&read_x, &read_y);
next_time = millis() + 20;
}
*x = read_x;
*y = read_y;
return touched;
}
#endif // TFT_TOUCH_DEVICE_GT911
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/tft/gt911.h
+120
View File
@@ -0,0 +1,120 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#define GT911_SLAVE_ADDRESS 0xBA
#if !PIN_EXISTS(GT911_RST)
#error "GT911_RST_PIN is not defined."
#elif !PIN_EXISTS(GT911_INT)
#error "GT911_INT_PIN is not defined."
#elif !PIN_EXISTS(GT911_SW_I2C_SCL)
#error "GT911_SW_I2C_SCL_PIN is not defined."
#elif !PIN_EXISTS(GT911_SW_I2C_SDA)
#error "GT911_SW_I2C_SDA_PIN is not defined."
#endif
class SW_IIC {
private:
uint16_t scl_pin;
uint16_t sda_pin;
void write_scl(bool level)
{
WRITE(scl_pin, level);
}
void write_sda(bool level)
{
WRITE(sda_pin, level);
}
bool read_sda()
{
return READ(sda_pin);
}
void set_sda_out()
{
SET_OUTPUT(sda_pin);
}
void set_sda_in()
{
SET_INPUT_PULLUP(sda_pin);
}
static void iic_delay(uint8_t t)
{
delayMicroseconds(t);
}
public:
SW_IIC(uint16_t sda, uint16_t scl);
// setSCL/SDA have to be called before begin()
void setSCL(uint16_t scl)
{
scl_pin = scl;
};
void setSDA(uint16_t sda)
{
sda_pin = sda;
};
void init(); // Initialize the IO port of IIC
void start(); // Send IIC start signal
void stop(); // Send IIC stop signal
void send_byte(uint8_t txd); // IIC sends a byte
uint8_t read_byte(bool ack); // IIC reads a byte
void send_ack(bool ack); // IIC sends ACK or NACK signal
bool read_ack();
};
typedef struct __attribute__((__packed__)) {
uint8_t xl;
uint8_t xh;
uint8_t yl;
uint8_t yh;
uint8_t sizel;
uint8_t sizeh;
uint8_t reserved;
uint8_t track_id;
} GT911_POINT;
typedef union __attribute__((__packed__)) {
uint8_t map[42];
struct {
uint8_t status; // 0x814E
uint8_t track_id; // 0x814F
GT911_POINT point[5]; // [0]:0x8150 - 0x8157 / [1]:0x8158 - 0x815F / [2]:0x8160 - 0x8167 / [3]:0x8168 - 0x816F / [4]:0x8170 - 0x8177
} REG;
} GT911_REG_MAP;
class GT911 {
private:
static const uint8_t gt911_slave_address = GT911_SLAVE_ADDRESS;
static GT911_REG_MAP reg;
static SW_IIC sw_iic;
static void write_reg(uint16_t reg, uint8_t reg_len, uint8_t* w_data, uint8_t w_len);
static void read_reg(uint16_t reg, uint8_t reg_len, uint8_t* r_data, uint8_t r_len);
public:
static void Init();
static bool getFirstTouchPoint(int16_t *x, int16_t *y);
static bool getPoint(int16_t *x, int16_t *y);
};
Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
+181
View File
@@ -0,0 +1,181 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../../inc/MarlinConfig.h"
#if HAS_FSMC_TFT
#include "tft_fsmc.h"
#include "pinconfig.h"
SRAM_HandleTypeDef TFT_FSMC::SRAMx;
DMA_HandleTypeDef TFT_FSMC::DMAtx;
LCD_CONTROLLER_TypeDef *TFT_FSMC::LCD;
void TFT_FSMC::Init() {
uint32_t controllerAddress;
#if PIN_EXISTS(TFT_RESET)
OUT_WRITE(TFT_RESET_PIN, HIGH);
HAL_Delay(100);
#endif
#if PIN_EXISTS(TFT_BACKLIGHT)
OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
#endif
FSMC_NORSRAM_TimingTypeDef Timing, ExtTiming;
uint32_t NSBank = (uint32_t)pinmap_peripheral(digitalPinToPinName(TFT_CS_PIN), PinMap_FSMC_CS);
// Perform the SRAM1 memory initialization sequence
SRAMx.Instance = FSMC_NORSRAM_DEVICE;
SRAMx.Extended = FSMC_NORSRAM_EXTENDED_DEVICE;
// SRAMx.Init
SRAMx.Init.NSBank = NSBank;
SRAMx.Init.DataAddressMux = FSMC_DATA_ADDRESS_MUX_DISABLE;
SRAMx.Init.MemoryType = FSMC_MEMORY_TYPE_SRAM;
SRAMx.Init.MemoryDataWidth = TERN(TFT_INTERFACE_FSMC_8BIT, FSMC_NORSRAM_MEM_BUS_WIDTH_8, FSMC_NORSRAM_MEM_BUS_WIDTH_16);
SRAMx.Init.BurstAccessMode = FSMC_BURST_ACCESS_MODE_DISABLE;
SRAMx.Init.WaitSignalPolarity = FSMC_WAIT_SIGNAL_POLARITY_LOW;
SRAMx.Init.WrapMode = FSMC_WRAP_MODE_DISABLE;
SRAMx.Init.WaitSignalActive = FSMC_WAIT_TIMING_BEFORE_WS;
SRAMx.Init.WriteOperation = FSMC_WRITE_OPERATION_ENABLE;
SRAMx.Init.WaitSignal = FSMC_WAIT_SIGNAL_DISABLE;
SRAMx.Init.ExtendedMode = FSMC_EXTENDED_MODE_ENABLE;
SRAMx.Init.AsynchronousWait = FSMC_ASYNCHRONOUS_WAIT_DISABLE;
SRAMx.Init.WriteBurst = FSMC_WRITE_BURST_DISABLE;
#ifdef STM32F4xx
SRAMx.Init.PageSize = FSMC_PAGE_SIZE_NONE;
#endif
// Read Timing - relatively slow to ensure ID information is correctly read from TFT controller
// Can be decreases from 15-15-24 to 4-4-8 with risk of stability loss
Timing.AddressSetupTime = 15;
Timing.AddressHoldTime = 15;
Timing.DataSetupTime = 24;
Timing.BusTurnAroundDuration = 0;
Timing.CLKDivision = 16;
Timing.DataLatency = 17;
Timing.AccessMode = FSMC_ACCESS_MODE_A;
// Write Timing
// Can be decreases from 8-15-8 to 0-0-1 with risk of stability loss
ExtTiming.AddressSetupTime = 8;
ExtTiming.AddressHoldTime = 15;
ExtTiming.DataSetupTime = 8;
ExtTiming.BusTurnAroundDuration = 0;
ExtTiming.CLKDivision = 16;
ExtTiming.DataLatency = 17;
ExtTiming.AccessMode = FSMC_ACCESS_MODE_A;
__HAL_RCC_FSMC_CLK_ENABLE();
for (uint16_t i = 0; PinMap_FSMC[i].pin != NC; i++)
pinmap_pinout(PinMap_FSMC[i].pin, PinMap_FSMC);
pinmap_pinout(digitalPinToPinName(TFT_CS_PIN), PinMap_FSMC_CS);
pinmap_pinout(digitalPinToPinName(TFT_RS_PIN), PinMap_FSMC_RS);
controllerAddress = FSMC_BANK1_1;
#ifdef PF0
switch (NSBank) {
case FSMC_NORSRAM_BANK2: controllerAddress = FSMC_BANK1_2 ; break;
case FSMC_NORSRAM_BANK3: controllerAddress = FSMC_BANK1_3 ; break;
case FSMC_NORSRAM_BANK4: controllerAddress = FSMC_BANK1_4 ; break;
}
#endif
controllerAddress |= (uint32_t)pinmap_peripheral(digitalPinToPinName(TFT_RS_PIN), PinMap_FSMC_RS);
HAL_SRAM_Init(&SRAMx, &Timing, &ExtTiming);
__HAL_RCC_DMA2_CLK_ENABLE();
#ifdef STM32F1xx
DMAtx.Instance = DMA2_Channel1;
#elif defined(STM32F4xx)
DMAtx.Instance = DMA2_Stream0;
DMAtx.Init.Channel = DMA_CHANNEL_0;
DMAtx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
DMAtx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
DMAtx.Init.MemBurst = DMA_MBURST_SINGLE;
DMAtx.Init.PeriphBurst = DMA_PBURST_SINGLE;
#endif
DMAtx.Init.Direction = DMA_MEMORY_TO_MEMORY;
DMAtx.Init.MemInc = DMA_MINC_DISABLE;
DMAtx.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
DMAtx.Init.Mode = DMA_NORMAL;
DMAtx.Init.Priority = DMA_PRIORITY_HIGH;
LCD = (LCD_CONTROLLER_TypeDef *)controllerAddress;
}
uint32_t TFT_FSMC::GetID() {
uint32_t id;
WriteReg(0);
id = LCD->RAM;
if (id == 0)
id = ReadID(LCD_READ_ID);
if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
id = ReadID(LCD_READ_ID4);
return id;
}
uint32_t TFT_FSMC::ReadID(tft_data_t Reg) {
uint32_t id;
WriteReg(Reg);
id = LCD->RAM; // dummy read
id = Reg << 24;
id |= (LCD->RAM & 0x00FF) << 16;
id |= (LCD->RAM & 0x00FF) << 8;
id |= LCD->RAM & 0x00FF;
return id;
}
bool TFT_FSMC::isBusy() {
#if defined(STM32F1xx)
volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
#elif defined(STM32F4xx)
volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;
#endif
if (dmaEnabled) {
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
Abort();
}
else
Abort();
return dmaEnabled;
}
void TFT_FSMC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DMAtx.Init.PeriphInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
DataTransferBegin();
HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(LCD->RAM), Count);
HAL_DMA_PollForTransfer(&DMAtx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
Abort();
}
#endif // HAS_FSMC_TFT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/tft/tft_fsmc.h
+171
View File
@@ -0,0 +1,171 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#ifdef STM32F1xx
#include "stm32f1xx_hal.h"
#elif defined(STM32F4xx)
#include "stm32f4xx_hal.h"
#else
#error "FSMC TFT is currently only supported on STM32F1 and STM32F4 hardware."
#endif
#ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)
#endif
#ifndef LCD_READ_ID4
#define LCD_READ_ID4 0xD3 // Read display identification information (0xD3 on ILI9341)
#endif
#define DATASIZE_8BIT SPI_DATASIZE_8BIT
#define DATASIZE_16BIT SPI_DATASIZE_16BIT
#define TFT_IO_DRIVER TFT_FSMC
#define TFT_DATASIZE TERN(TFT_INTERFACE_FSMC_8BIT, DATASIZE_8BIT, DATASIZE_16BIT)
typedef TERN(TFT_INTERFACE_FSMC_8BIT, uint8_t, uint16_t) tft_data_t;
typedef struct {
__IO tft_data_t REG;
__IO tft_data_t RAM;
} LCD_CONTROLLER_TypeDef;
class TFT_FSMC {
private:
static SRAM_HandleTypeDef SRAMx;
static DMA_HandleTypeDef DMAtx;
static LCD_CONTROLLER_TypeDef *LCD;
static uint32_t ReadID(tft_data_t Reg);
static void Transmit(tft_data_t Data) { LCD->RAM = Data; __DSB(); }
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
static void Init();
static uint32_t GetID();
static bool isBusy();
static void Abort() { __HAL_DMA_DISABLE(&DMAtx); }
static void DataTransferBegin(uint16_t DataWidth = TFT_DATASIZE) {}
static void DataTransferEnd() {};
static void WriteData(uint16_t Data) { Transmit(tft_data_t(Data)); }
static void WriteReg(uint16_t Reg) { LCD->REG = tft_data_t(Reg); __DSB(); }
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
}
}
};
#ifdef STM32F1xx
#define FSMC_PIN_DATA STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)
#elif defined(STM32F4xx)
#define FSMC_PIN_DATA STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_FSMC)
#define FSMC_BANK1_1 0x60000000U
#define FSMC_BANK1_2 0x64000000U
#define FSMC_BANK1_3 0x68000000U
#define FSMC_BANK1_4 0x6C000000U
#else
#error No configuration for this MCU
#endif
const PinMap PinMap_FSMC[] = {
{PD_14, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D00
{PD_15, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D01
{PD_0, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D02
{PD_1, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D03
{PE_7, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D04
{PE_8, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D05
{PE_9, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D06
{PE_10, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D07
#if DISABLED(TFT_INTERFACE_FSMC_8BIT)
{PE_11, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D08
{PE_12, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D09
{PE_13, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D10
{PE_14, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D11
{PE_15, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D12
{PD_8, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D13
{PD_9, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D14
{PD_10, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D15
#endif
{PD_4, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_NOE
{PD_5, FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_NWE
{NC, NP, 0}
};
const PinMap PinMap_FSMC_CS[] = {
{PD_7, (void *)FSMC_NORSRAM_BANK1, FSMC_PIN_DATA}, // FSMC_NE1
#ifdef PF0
{PG_9, (void *)FSMC_NORSRAM_BANK2, FSMC_PIN_DATA}, // FSMC_NE2
{PG_10, (void *)FSMC_NORSRAM_BANK3, FSMC_PIN_DATA}, // FSMC_NE3
{PG_12, (void *)FSMC_NORSRAM_BANK4, FSMC_PIN_DATA}, // FSMC_NE4
#endif
{NC, NP, 0}
};
#if ENABLED(TFT_INTERFACE_FSMC_8BIT)
#define FSMC_RS(A) (void *)((2 << (A-1)) - 1)
#else
#define FSMC_RS(A) (void *)((2 << A) - 2)
#endif
const PinMap PinMap_FSMC_RS[] = {
#ifdef PF0
{PF_0, FSMC_RS( 0), FSMC_PIN_DATA}, // FSMC_A0
{PF_1, FSMC_RS( 1), FSMC_PIN_DATA}, // FSMC_A1
{PF_2, FSMC_RS( 2), FSMC_PIN_DATA}, // FSMC_A2
{PF_3, FSMC_RS( 3), FSMC_PIN_DATA}, // FSMC_A3
{PF_4, FSMC_RS( 4), FSMC_PIN_DATA}, // FSMC_A4
{PF_5, FSMC_RS( 5), FSMC_PIN_DATA}, // FSMC_A5
{PF_12, FSMC_RS( 6), FSMC_PIN_DATA}, // FSMC_A6
{PF_13, FSMC_RS( 7), FSMC_PIN_DATA}, // FSMC_A7
{PF_14, FSMC_RS( 8), FSMC_PIN_DATA}, // FSMC_A8
{PF_15, FSMC_RS( 9), FSMC_PIN_DATA}, // FSMC_A9
{PG_0, FSMC_RS(10), FSMC_PIN_DATA}, // FSMC_A10
{PG_1, FSMC_RS(11), FSMC_PIN_DATA}, // FSMC_A11
{PG_2, FSMC_RS(12), FSMC_PIN_DATA}, // FSMC_A12
{PG_3, FSMC_RS(13), FSMC_PIN_DATA}, // FSMC_A13
{PG_4, FSMC_RS(14), FSMC_PIN_DATA}, // FSMC_A14
{PG_5, FSMC_RS(15), FSMC_PIN_DATA}, // FSMC_A15
#endif
{PD_11, FSMC_RS(16), FSMC_PIN_DATA}, // FSMC_A16
{PD_12, FSMC_RS(17), FSMC_PIN_DATA}, // FSMC_A17
{PD_13, FSMC_RS(18), FSMC_PIN_DATA}, // FSMC_A18
{PE_3, FSMC_RS(19), FSMC_PIN_DATA}, // FSMC_A19
{PE_4, FSMC_RS(20), FSMC_PIN_DATA}, // FSMC_A20
{PE_5, FSMC_RS(21), FSMC_PIN_DATA}, // FSMC_A21
{PE_6, FSMC_RS(22), FSMC_PIN_DATA}, // FSMC_A22
{PE_2, FSMC_RS(23), FSMC_PIN_DATA}, // FSMC_A23
#ifdef PF0
{PG_13, FSMC_RS(24), FSMC_PIN_DATA}, // FSMC_A24
{PG_14, FSMC_RS(25), FSMC_PIN_DATA}, // FSMC_A25
#endif
{NC, NP, 0}
};
Marlin/src/HAL/STM32/tft/tft_ltdc.cpp
+387
View File
@@ -0,0 +1,387 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../../inc/MarlinConfig.h"
#if HAS_LTDC_TFT
#include "tft_ltdc.h"
#include "pinconfig.h"
#define FRAME_BUFFER_ADDRESS 0XC0000000 // SDRAM address
#define SDRAM_TIMEOUT ((uint32_t)0xFFFF)
#define REFRESH_COUNT ((uint32_t)0x02A5) // SDRAM refresh counter
#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)
#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)
#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)
#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command) {
__IO uint32_t tmpmrd =0;
/* Step 1: Configure a clock configuration enable command */
Command->CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 1;
Command->ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 2: Insert 100 us minimum delay */
/* Inserted delay is equal to 1 ms due to systick time base unit (ms) */
HAL_Delay(1);
/* Step 3: Configure a PALL (precharge all) command */
Command->CommandMode = FMC_SDRAM_CMD_PALL;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 1;
Command->ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 4 : Configure a Auto-Refresh command */
Command->CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 8;
Command->ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 5: Program the external memory mode register */
tmpmrd = (uint32_t)(SDRAM_MODEREG_BURST_LENGTH_1 |
SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |
SDRAM_MODEREG_CAS_LATENCY_2 |
SDRAM_MODEREG_OPERATING_MODE_STANDARD |
SDRAM_MODEREG_WRITEBURST_MODE_SINGLE);
Command->CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command->AutoRefreshNumber = 1;
Command->ModeRegisterDefinition = tmpmrd;
/* Send the command */
HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
/* Step 6: Set the refresh rate counter */
/* Set the device refresh rate */
HAL_SDRAM_ProgramRefreshRate(hsdram, REFRESH_COUNT);
}
void SDRAM_Config() {
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_FMC_CLK_ENABLE();
SDRAM_HandleTypeDef hsdram;
FMC_SDRAM_TimingTypeDef SDRAM_Timing;
FMC_SDRAM_CommandTypeDef command;
/* Configure the SDRAM device */
hsdram.Instance = FMC_SDRAM_DEVICE;
hsdram.Init.SDBank = FMC_SDRAM_BANK1;
hsdram.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9;
hsdram.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_13;
hsdram.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
hsdram.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
hsdram.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
hsdram.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
hsdram.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
hsdram.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
hsdram.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
/* Timing configuration for 100Mhz as SDRAM clock frequency (System clock is up to 200Mhz) */
SDRAM_Timing.LoadToActiveDelay = 2;
SDRAM_Timing.ExitSelfRefreshDelay = 8;
SDRAM_Timing.SelfRefreshTime = 6;
SDRAM_Timing.RowCycleDelay = 6;
SDRAM_Timing.WriteRecoveryTime = 2;
SDRAM_Timing.RPDelay = 2;
SDRAM_Timing.RCDDelay = 2;
/* Initialize the SDRAM controller */
if (HAL_SDRAM_Init(&hsdram, &SDRAM_Timing) != HAL_OK)
{
/* Initialization Error */
}
/* Program the SDRAM external device */
SDRAM_Initialization_Sequence(&hsdram, &command);
}
void LTDC_Config() {
__HAL_RCC_LTDC_CLK_ENABLE();
__HAL_RCC_DMA2D_CLK_ENABLE();
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
/* The PLL3R is configured to provide the LTDC PCLK clock */
/* PLL3_VCO Input = HSE_VALUE / PLL3M = 25Mhz / 5 = 5 Mhz */
/* PLL3_VCO Output = PLL3_VCO Input * PLL3N = 5Mhz * 160 = 800 Mhz */
/* PLLLCDCLK = PLL3_VCO Output/PLL3R = 800Mhz / 16 = 50Mhz */
/* LTDC clock frequency = PLLLCDCLK = 50 Mhz */
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC;
PeriphClkInitStruct.PLL3.PLL3M = 5;
PeriphClkInitStruct.PLL3.PLL3N = 160;
PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
PeriphClkInitStruct.PLL3.PLL3P = 2;
PeriphClkInitStruct.PLL3.PLL3Q = 2;
PeriphClkInitStruct.PLL3.PLL3R = (800 / LTDC_LCD_CLK);
PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE;
PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_2;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
LTDC_HandleTypeDef hltdc_F;
LTDC_LayerCfgTypeDef pLayerCfg;
/* LTDC Initialization -------------------------------------------------------*/
/* Polarity configuration */
/* Initialize the horizontal synchronization polarity as active low */
hltdc_F.Init.HSPolarity = LTDC_HSPOLARITY_AL;
/* Initialize the vertical synchronization polarity as active low */
hltdc_F.Init.VSPolarity = LTDC_VSPOLARITY_AL;
/* Initialize the data enable polarity as active low */
hltdc_F.Init.DEPolarity = LTDC_DEPOLARITY_AL;
/* Initialize the pixel clock polarity as input pixel clock */
hltdc_F.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
/* Timing configuration */
hltdc_F.Init.HorizontalSync = (LTDC_LCD_HSYNC - 1);
hltdc_F.Init.VerticalSync = (LTDC_LCD_VSYNC - 1);
hltdc_F.Init.AccumulatedHBP = (LTDC_LCD_HSYNC + LTDC_LCD_HBP - 1);
hltdc_F.Init.AccumulatedVBP = (LTDC_LCD_VSYNC + LTDC_LCD_VBP - 1);
hltdc_F.Init.AccumulatedActiveH = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP - 1);
hltdc_F.Init.AccumulatedActiveW = (TFT_WIDTH + LTDC_LCD_HSYNC + LTDC_LCD_HBP - 1);
hltdc_F.Init.TotalHeigh = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP + LTDC_LCD_VFP - 1);
hltdc_F.Init.TotalWidth = (TFT_WIDTH + LTDC_LCD_HSYNC + LTDC_LCD_HBP + LTDC_LCD_HFP - 1);
/* Configure R,G,B component values for LCD background color : all black background */
hltdc_F.Init.Backcolor.Blue = 0;
hltdc_F.Init.Backcolor.Green = 0;
hltdc_F.Init.Backcolor.Red = 0;
hltdc_F.Instance = LTDC;
/* Layer0 Configuration ------------------------------------------------------*/
/* Windowing configuration */
pLayerCfg.WindowX0 = 0;
pLayerCfg.WindowX1 = TFT_WIDTH;
pLayerCfg.WindowY0 = 0;
pLayerCfg.WindowY1 = TFT_HEIGHT;
/* Pixel Format configuration*/
pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
/* Start Address configuration : frame buffer is located at SDRAM memory */
pLayerCfg.FBStartAdress = (uint32_t)(FRAME_BUFFER_ADDRESS);
/* Alpha constant (255 == totally opaque) */
pLayerCfg.Alpha = 255;
/* Default Color configuration (configure A,R,G,B component values) : no background color */
pLayerCfg.Alpha0 = 0; /* fully transparent */
pLayerCfg.Backcolor.Blue = 0;
pLayerCfg.Backcolor.Green = 0;
pLayerCfg.Backcolor.Red = 0;
/* Configure blending factors */
pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA;
pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA;
/* Configure the number of lines and number of pixels per line */
pLayerCfg.ImageWidth = TFT_WIDTH;
pLayerCfg.ImageHeight = TFT_HEIGHT;
/* Configure the LTDC */
if (HAL_LTDC_Init(&hltdc_F) != HAL_OK)
{
/* Initialization Error */
}
/* Configure the Layer*/
if (HAL_LTDC_ConfigLayer(&hltdc_F, &pLayerCfg, 0) != HAL_OK)
{
/* Initialization Error */
}
}
uint16_t TFT_LTDC::x_min = 0;
uint16_t TFT_LTDC::x_max = 0;
uint16_t TFT_LTDC::y_min = 0;
uint16_t TFT_LTDC::y_max = 0;
uint16_t TFT_LTDC::x_cur = 0;
uint16_t TFT_LTDC::y_cur = 0;
uint8_t TFT_LTDC::reg = 0;
volatile uint16_t* TFT_LTDC::framebuffer = (volatile uint16_t* )FRAME_BUFFER_ADDRESS;
void TFT_LTDC::Init() {
// SDRAM pins init
for (uint16_t i = 0; PinMap_SDRAM[i].pin != NC; i++)
pinmap_pinout(PinMap_SDRAM[i].pin, PinMap_SDRAM);
// SDRAM peripheral config
SDRAM_Config();
// LTDC pins init
for (uint16_t i = 0; PinMap_LTDC[i].pin != NC; i++)
pinmap_pinout(PinMap_LTDC[i].pin, PinMap_LTDC);
// LTDC peripheral config
LTDC_Config();
}
uint32_t TFT_LTDC::GetID() {
return 0xABAB;
}
uint32_t TFT_LTDC::ReadID(tft_data_t Reg) {
return 0xABAB;
}
bool TFT_LTDC::isBusy() {
return false;
}
uint16_t TFT_LTDC::ReadPoint(uint16_t x, uint16_t y) {
return framebuffer[(TFT_WIDTH * y) + x];
}
void TFT_LTDC::DrawPoint(uint16_t x, uint16_t y, uint16_t color) {
framebuffer[(TFT_WIDTH * y) + x] = color;
}
void TFT_LTDC::DrawRect(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t color) {
if (sx == ex || sy == ey) return;
uint16_t offline = TFT_WIDTH - (ex - sx);
uint32_t addr = (uint32_t)&framebuffer[(TFT_WIDTH * sy) + sx];
CBI(DMA2D->CR, 0);
DMA2D->CR = 3 << 16;
DMA2D->OPFCCR = 0X02;
DMA2D->OOR = offline;
DMA2D->OMAR = addr;
DMA2D->NLR = (ey - sy) | ((ex - sx) << 16);
DMA2D->OCOLR = color;
SBI(DMA2D->CR, 0);
uint32_t timeout = 0;
while (!TEST(DMA2D->ISR, 1)) {
timeout++;
if (timeout > 0x1FFFFF) break;
}
SBI(DMA2D->IFCR, 1);
}
void TFT_LTDC::DrawImage(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *colors) {
if (sx == ex || sy == ey) return;
uint16_t offline = TFT_WIDTH - (ex - sx);
uint32_t addr = (uint32_t)&framebuffer[(TFT_WIDTH * sy) + sx];
CBI(DMA2D->CR, 0);
DMA2D->CR = 0 << 16;
DMA2D->FGPFCCR = 0X02;
DMA2D->FGOR = 0;
DMA2D->OOR = offline;
DMA2D->FGMAR = (uint32_t)colors;
DMA2D->OMAR = addr;
DMA2D->NLR = (ey - sy) | ((ex - sx) << 16);
SBI(DMA2D->CR, 0);
uint32_t timeout = 0;
while (!TEST(DMA2D->ISR, 1)) {
timeout++;
if (timeout > 0x1FFFFF) break;
}
SBI(DMA2D->IFCR, 1);
}
void TFT_LTDC::WriteData(uint16_t data) {
switch (reg) {
case 0x01: x_cur = x_min = data; return;
case 0x02: x_max = data; return;
case 0x03: y_cur = y_min = data; return;
case 0x04: y_max = data; return;
}
Transmit(data);
}
void TFT_LTDC::Transmit(tft_data_t Data) {
DrawPoint(x_cur, y_cur, Data);
x_cur++;
if (x_cur > x_max) {
x_cur = x_min;
y_cur++;
if (y_cur > y_max) y_cur = y_min;
}
}
void TFT_LTDC::WriteReg(uint16_t Reg) {
reg = Reg;
}
void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
while (x_cur != x_min && Count) {
Transmit(*Data);
if (MemoryIncrease == DMA_PINC_ENABLE) Data++;
Count--;
}
uint16_t width = x_max - x_min + 1;
uint16_t height = Count / width;
uint16_t x_end_cnt = Count - (width * height);
if (height) {
if (MemoryIncrease == DMA_PINC_ENABLE) {
DrawImage(x_min, y_cur, x_min + width, y_cur + height, Data);
Data += width * height;
} else {
DrawRect(x_min, y_cur, x_min + width, y_cur + height, *Data);
}
y_cur += height;
}
while (x_end_cnt) {
Transmit(*Data);
if (MemoryIncrease == DMA_PINC_ENABLE) Data++;
x_end_cnt--;
}
}
#endif // HAS_LTDC_TFT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/tft/tft_ltdc.h
+155
View File
@@ -0,0 +1,155 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../../inc/MarlinConfig.h"
#ifdef STM32H7xx
#include "stm32h7xx_hal.h"
#else
#error "LTDC TFT is currently only supported on STM32H7 hardware."
#endif
#define DATASIZE_8BIT SPI_DATASIZE_8BIT
#define DATASIZE_16BIT SPI_DATASIZE_16BIT
#define TFT_IO_DRIVER TFT_LTDC
#define TFT_DATASIZE DATASIZE_16BIT
typedef uint16_t tft_data_t;
class TFT_LTDC {
private:
static volatile uint16_t *framebuffer;
static uint16_t x_min, x_max, y_min, y_max, x_cur, y_cur;
static uint8_t reg;
static uint32_t ReadID(tft_data_t Reg);
static uint16_t ReadPoint(uint16_t x, uint16_t y);
static void DrawPoint(uint16_t x, uint16_t y, uint16_t color);
static void DrawRect(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t color);
static void DrawImage(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *colors);
static void Transmit(tft_data_t Data);
static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
public:
static void Init();
static uint32_t GetID();
static bool isBusy();
static void Abort() { /*__HAL_DMA_DISABLE(&DMAtx);*/ }
static void DataTransferBegin(uint16_t DataWidth = TFT_DATASIZE) {}
static void DataTransferEnd() {};
static void WriteData(uint16_t Data);
static void WriteReg(uint16_t Reg);
static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
static void WriteMultiple(uint16_t Color, uint32_t Count) {
static uint16_t Data; Data = Color;
while (Count > 0) {
TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
}
}
};
const PinMap PinMap_LTDC[] = {
{PF_10, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_DE
{PG_7, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_CLK
{PI_9, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_VSYNC
{PI_10, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_HSYNC
{PG_6, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R7
{PH_12, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R6
{PH_11, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R5
{PH_10, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R4
{PH_9, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R3
{PI_2, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G7
{PI_1, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G6
{PI_0, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G5
{PH_15, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G4
{PH_14, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G3
{PH_13, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G2
{PI_7, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B7
{PI_6, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B6
{PI_5, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B5
{PI_4, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B4
{PG_11, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B3
{NC, NP, 0}
};
const PinMap PinMap_SDRAM[] = {
{PC_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNWE
{PC_2, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNE0
{PC_3, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDCKE0
{PE_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_NBL0
{PE_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_NBL1
{PF_11, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNRAS
{PG_8, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDCLK
{PG_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNCAS
{PG_4, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_BA0
{PG_5, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_BA1
{PD_14, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D0
{PD_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D1
{PD_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D2
{PD_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D3
{PE_7, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D4
{PE_8, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D5
{PE_9, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D6
{PE_10, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D7
{PE_11, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D8
{PE_12, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D9
{PE_13, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D10
{PE_14, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D11
{PE_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D12
{PD_8, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D13
{PD_9, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D14
{PD_10, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D15
{PF_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A0
{PF_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A1
{PF_2, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A2
{PF_3, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A3
{PF_4, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A4
{PF_5, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A5
{PF_12, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A6
{PF_13, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A7
{PF_14, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A8
{PF_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A9
{PG_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A10
{PG_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A11
{PG_2, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A12
{NC, NP, 0}
};
const PinMap PinMap_QUADSPI[] = {
{PB_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_CLK
{PB_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_NCS
{PF_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO3
{PF_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO2
{PF_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
{PF_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
{NC, NP, 0}
};
Marlin/src/HAL/STM32/tft/tft_spi.cpp
+235
View File
@@ -0,0 +1,235 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../../inc/MarlinConfig.h"
#if HAS_SPI_TFT
#include "tft_spi.h"
#include "pinconfig.h"
SPI_HandleTypeDef TFT_SPI::SPIx;
DMA_HandleTypeDef TFT_SPI::DMAtx;
void TFT_SPI::Init() {
SPI_TypeDef *spiInstance;
OUT_WRITE(TFT_A0_PIN, HIGH);
OUT_WRITE(TFT_CS_PIN, HIGH);
if ((spiInstance = (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK)) == NP) return;
if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI)) return;
#if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
if (spiInstance != (SPI_TypeDef *)pinmap_peripheral(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO)) return;
#endif
SPIx.Instance = spiInstance;
SPIx.State = HAL_SPI_STATE_RESET;
SPIx.Init.NSS = SPI_NSS_SOFT;
SPIx.Init.Mode = SPI_MODE_MASTER;
SPIx.Init.Direction = (TFT_MISO_PIN == TFT_MOSI_PIN) ? SPI_DIRECTION_1LINE : SPI_DIRECTION_2LINES;
SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
SPIx.Init.CLKPhase = SPI_PHASE_1EDGE;
SPIx.Init.CLKPolarity = SPI_POLARITY_LOW;
SPIx.Init.DataSize = SPI_DATASIZE_8BIT;
SPIx.Init.FirstBit = SPI_FIRSTBIT_MSB;
SPIx.Init.TIMode = SPI_TIMODE_DISABLE;
SPIx.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
SPIx.Init.CRCPolynomial = 10;
pinmap_pinout(digitalPinToPinName(TFT_SCK_PIN), PinMap_SPI_SCLK);
pinmap_pinout(digitalPinToPinName(TFT_MOSI_PIN), PinMap_SPI_MOSI);
#if PIN_EXISTS(TFT_MISO) && TFT_MISO_PIN != TFT_MOSI_PIN
pinmap_pinout(digitalPinToPinName(TFT_MISO_PIN), PinMap_SPI_MISO);
#endif
pin_PullConfig(get_GPIO_Port(STM_PORT(digitalPinToPinName(TFT_SCK_PIN))), STM_LL_GPIO_PIN(digitalPinToPinName(TFT_SCK_PIN)), GPIO_PULLDOWN);
#ifdef SPI1_BASE
if (SPIx.Instance == SPI1) {
__HAL_RCC_SPI1_CLK_ENABLE();
#ifdef STM32F1xx
__HAL_RCC_DMA1_CLK_ENABLE();
DMAtx.Instance = DMA1_Channel3;
#elif defined(STM32F4xx)
__HAL_RCC_DMA2_CLK_ENABLE();
DMAtx.Instance = DMA2_Stream3;
DMAtx.Init.Channel = DMA_CHANNEL_3;
#endif
SPIx.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
}
#endif
#ifdef SPI2_BASE
if (SPIx.Instance == SPI2) {
__HAL_RCC_SPI2_CLK_ENABLE();
#ifdef STM32F1xx
__HAL_RCC_DMA1_CLK_ENABLE();
DMAtx.Instance = DMA1_Channel5;
#elif defined(STM32F4xx)
__HAL_RCC_DMA1_CLK_ENABLE();
DMAtx.Instance = DMA1_Stream4;
DMAtx.Init.Channel = DMA_CHANNEL_0;
#endif
}
#endif
#ifdef SPI3_BASE
if (SPIx.Instance == SPI3) {
__HAL_RCC_SPI3_CLK_ENABLE();
#ifdef STM32F1xx
__HAL_RCC_DMA2_CLK_ENABLE();
DMAtx.Instance = DMA2_Channel2;
#elif defined(STM32F4xx)
__HAL_RCC_DMA1_CLK_ENABLE();
DMAtx.Instance = DMA1_Stream5;
DMAtx.Init.Channel = DMA_CHANNEL_0;
#endif
}
#endif
HAL_SPI_Init(&SPIx);
DMAtx.Init.Direction = DMA_MEMORY_TO_PERIPH;
DMAtx.Init.PeriphInc = DMA_PINC_DISABLE;
DMAtx.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
DMAtx.Init.Mode = DMA_NORMAL;
DMAtx.Init.Priority = DMA_PRIORITY_LOW;
#ifdef STM32F4xx
DMAtx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
#endif
}
void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
SPIx.Init.DataSize = DataSize == DATASIZE_8BIT ? SPI_DATASIZE_8BIT : SPI_DATASIZE_16BIT;
HAL_SPI_Init(&SPIx);
WRITE(TFT_CS_PIN, LOW);
}
uint32_t TFT_SPI::GetID() {
uint32_t id;
id = ReadID(LCD_READ_ID);
if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
id = ReadID(LCD_READ_ID4);
return id;
}
uint32_t TFT_SPI::ReadID(uint16_t Reg) {
uint32_t Data = 0;
#if PIN_EXISTS(TFT_MISO)
uint32_t BaudRatePrescaler = SPIx.Init.BaudRatePrescaler;
uint32_t i;
SPIx.Init.BaudRatePrescaler = SPIx.Instance == SPI1 ? SPI_BAUDRATEPRESCALER_8 : SPI_BAUDRATEPRESCALER_4;
DataTransferBegin(DATASIZE_8BIT);
WriteReg(Reg);
if (SPIx.Init.Direction == SPI_DIRECTION_1LINE) SPI_1LINE_RX(&SPIx);
__HAL_SPI_ENABLE(&SPIx);
for (i = 0; i < 4; i++) {
#if TFT_MISO_PIN != TFT_MOSI_PIN
//if (hspi->Init.Direction == SPI_DIRECTION_2LINES) {
while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
SPIx.Instance->DR = 0;
//}
#endif
while ((SPIx.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
Data = (Data << 8) | SPIx.Instance->DR;
}
__HAL_SPI_DISABLE(&SPIx);
DataTransferEnd();
SPIx.Init.BaudRatePrescaler = BaudRatePrescaler;
#endif
return Data >> 7;
}
bool TFT_SPI::isBusy() {
#if defined(STM32F1xx)
volatile bool dmaEnabled = (DMAtx.Instance->CCR & DMA_CCR_EN) != RESET;
#elif defined(STM32F4xx)
volatile bool dmaEnabled = DMAtx.Instance->CR & DMA_SxCR_EN;
#endif
if (dmaEnabled) {
if (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) != 0 || __HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) != 0)
Abort();
}
else
Abort();
return dmaEnabled;
}
void TFT_SPI::Abort() {
// Wait for any running spi
while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
while ((SPIx.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY) {}
// First, abort any running dma
HAL_DMA_Abort(&DMAtx);
// DeInit objects
HAL_DMA_DeInit(&DMAtx);
HAL_SPI_DeInit(&SPIx);
// Deselect CS
DataTransferEnd();
}
void TFT_SPI::Transmit(uint16_t Data) {
if (TFT_MISO_PIN == TFT_MOSI_PIN)
SPI_1LINE_TX(&SPIx);
__HAL_SPI_ENABLE(&SPIx);
SPIx.Instance->DR = Data;
while ((SPIx.Instance->SR & SPI_FLAG_TXE) != SPI_FLAG_TXE) {}
while ((SPIx.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY) {}
if (TFT_MISO_PIN != TFT_MOSI_PIN)
__HAL_SPI_CLEAR_OVRFLAG(&SPIx); // Clear overrun flag in 2 Lines communication mode because received is not read
}
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
// Wait last dma finish, to start another
while (isBusy()) { /* nada */ }
DMAtx.Init.MemInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
if (TFT_MISO_PIN == TFT_MOSI_PIN)
SPI_1LINE_TX(&SPIx);
DataTransferBegin();
HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(SPIx.Instance->DR), Count);
__HAL_SPI_ENABLE(&SPIx);
SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); // Enable Tx DMA Request
HAL_DMA_PollForTransfer(&DMAtx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
Abort();
}
#endif // HAS_SPI_TFT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

Some files were not shown because too many files have changed in this diff Show More