First commit for Ender-3V3 SE
First commit for Ender-3V3 SE
This commit is contained in:
CrealityTech
@@ -0,0 +1,314 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HOTENDS > 3 || E_STEPPERS > 3
|
||||
#error "FYSETC S6 supports up to 3 hotends / E-steppers."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "FYSETC S6"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
#endif
|
||||
|
||||
// Avoid conflict with TIMER_TONE defined in variant
|
||||
#define STEP_TIMER 10
|
||||
|
||||
//
|
||||
// EEPROM Emulation
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
//#define I2C_EEPROM
|
||||
#endif
|
||||
|
||||
#if ENABLED(FLASH_EEPROM_EMULATION)
|
||||
// Decrease delays and flash wear by spreading writes across the
|
||||
// 128 kB sector allocated for EEPROM emulation.
|
||||
#define FLASH_EEPROM_LEVELING
|
||||
#elif ENABLED(I2C_EEPROM)
|
||||
#define MARLIN_EEPROM_SIZE 0x0800 // 2KB
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA3
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PB14
|
||||
#define X_MAX_PIN PA1
|
||||
#define Y_MIN_PIN PB13
|
||||
#define Y_MAX_PIN PA2
|
||||
#define Z_MIN_PIN PA0
|
||||
#define Z_MAX_PIN PA3
|
||||
|
||||
//
|
||||
// Filament Sensor
|
||||
// share with X_MAX_PIN
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PA1
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PE11
|
||||
#define X_DIR_PIN PE10
|
||||
#ifndef X_ENABLE_PIN
|
||||
#define X_ENABLE_PIN PE12
|
||||
#endif
|
||||
#define X_CS_PIN PE7
|
||||
|
||||
#define Y_STEP_PIN PD8
|
||||
#define Y_DIR_PIN PB12
|
||||
#define Y_ENABLE_PIN PD9
|
||||
#define Y_CS_PIN PE15
|
||||
|
||||
#define Z_STEP_PIN PD14
|
||||
#define Z_DIR_PIN PD13
|
||||
#define Z_ENABLE_PIN PD15
|
||||
#define Z_CS_PIN PD10
|
||||
|
||||
#define E0_STEP_PIN PD5
|
||||
#define E0_DIR_PIN PD6
|
||||
#define E0_ENABLE_PIN PD4
|
||||
#define E0_CS_PIN PD7
|
||||
|
||||
#define E1_STEP_PIN PE6
|
||||
#define E1_DIR_PIN PC13
|
||||
#define E1_ENABLE_PIN PE5
|
||||
#define E1_CS_PIN PC14
|
||||
|
||||
#define E2_STEP_PIN PE2
|
||||
#define E2_DIR_PIN PE4
|
||||
#define E2_ENABLE_PIN PE3
|
||||
#define E2_CS_PIN PC15
|
||||
|
||||
#if HAS_TMC_UART
|
||||
//
|
||||
// TMC2208/TMC2209 stepper drivers
|
||||
//
|
||||
|
||||
//
|
||||
// Software serial
|
||||
//
|
||||
#ifndef X_SERIAL_TX_PIN
|
||||
#define X_SERIAL_TX_PIN PE9
|
||||
#endif
|
||||
#ifndef X_SERIAL_RX_PIN
|
||||
#define X_SERIAL_RX_PIN PE8
|
||||
#endif
|
||||
#ifndef Y_SERIAL_TX_PIN
|
||||
#define Y_SERIAL_TX_PIN PE14
|
||||
#endif
|
||||
#ifndef Y_SERIAL_RX_PIN
|
||||
#define Y_SERIAL_RX_PIN PE13
|
||||
#endif
|
||||
#ifndef Z_SERIAL_TX_PIN
|
||||
#define Z_SERIAL_TX_PIN PD11
|
||||
#endif
|
||||
#ifndef Z_SERIAL_RX_PIN
|
||||
#define Z_SERIAL_RX_PIN PD12
|
||||
#endif
|
||||
#ifndef E0_SERIAL_TX_PIN
|
||||
#define E0_SERIAL_TX_PIN PD3
|
||||
#endif
|
||||
#ifndef E0_SERIAL_RX_PIN
|
||||
#define E0_SERIAL_RX_PIN PA15
|
||||
#endif
|
||||
#ifndef E1_SERIAL_TX_PIN
|
||||
#define E1_SERIAL_TX_PIN PC4
|
||||
#endif
|
||||
#ifndef E1_SERIAL_RX_PIN
|
||||
#define E1_SERIAL_RX_PIN PC5
|
||||
#endif
|
||||
#ifndef E2_SERIAL_TX_PIN
|
||||
#define E2_SERIAL_TX_PIN PE1
|
||||
#endif
|
||||
#ifndef E2_SERIAL_RX_PIN
|
||||
#define E2_SERIAL_RX_PIN PE0
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC0
|
||||
#define TEMP_1_PIN PC1
|
||||
#define TEMP_2_PIN PC2
|
||||
#define TEMP_BED_PIN PC3
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#ifndef HEATER_0_PIN
|
||||
#define HEATER_0_PIN PB3
|
||||
#endif
|
||||
#ifndef HEATER_1_PIN
|
||||
#define HEATER_1_PIN PB4
|
||||
#endif
|
||||
#ifndef HEATER_2_PIN
|
||||
#define HEATER_2_PIN PB15
|
||||
#endif
|
||||
#ifndef HEATER_BED_PIN
|
||||
#define HEATER_BED_PIN PC8
|
||||
#endif
|
||||
|
||||
#define FAN_PIN PB0
|
||||
#define FAN1_PIN PB1
|
||||
#define FAN2_PIN PB2
|
||||
|
||||
//
|
||||
// SPI
|
||||
//
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
//#define LED_PIN PB14
|
||||
//#define BTN_PIN PC10
|
||||
//#define PS_ON_PIN PE11
|
||||
//#define KILL_PIN PC5
|
||||
|
||||
#define SDSS PA4
|
||||
#define SD_DETECT_PIN PB10
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if ENABLED(FYSETC_242_OLED_12864)
|
||||
|
||||
#define BTN_EN1 PC9
|
||||
#define BTN_EN2 PD1
|
||||
#define BTN_ENC PA8
|
||||
|
||||
#define BEEPER_PIN PC6
|
||||
|
||||
#define LCD_PINS_DC PC12
|
||||
#define LCD_PINS_RS PC7 // LCD_RST
|
||||
#define DOGLCD_CS PD2
|
||||
#define DOGLCD_MOSI PC10
|
||||
#define DOGLCD_SCK PC11
|
||||
#define DOGLCD_A0 LCD_PINS_DC
|
||||
#define FORCE_SOFT_SPI
|
||||
|
||||
#define KILL_PIN -1 // NC
|
||||
#define NEOPIXEL_PIN PD0
|
||||
|
||||
#elif HAS_WIRED_LCD
|
||||
|
||||
#define BEEPER_PIN PC9
|
||||
#define BTN_ENC PA8
|
||||
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define LCD_PINS_RS PD0
|
||||
|
||||
#define BTN_EN1 PC11
|
||||
#define BTN_EN2 PC10
|
||||
|
||||
#define LCD_PINS_ENABLE PD1
|
||||
#define LCD_PINS_D4 PC12
|
||||
|
||||
#else
|
||||
|
||||
#define LCD_PINS_RS PD2
|
||||
|
||||
#define BTN_EN1 PC6
|
||||
#define BTN_EN2 PC7
|
||||
|
||||
#define LCD_SDSS PA4
|
||||
|
||||
#define LCD_PINS_ENABLE PC11
|
||||
#define LCD_PINS_D4 PC10
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864)
|
||||
// See https://wiki.fysetc.com/Mini12864_Panel
|
||||
#define DOGLCD_CS PC11
|
||||
#define DOGLCD_A0 PD2
|
||||
#if ENABLED(FYSETC_GENERIC_12864_1_1)
|
||||
#define LCD_BACKLIGHT_PIN PD0
|
||||
#endif
|
||||
#define LCD_RESET_PIN PC10 // Must be high or open for LCD to operate normally.
|
||||
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN PC12
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN PD0
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN PD1
|
||||
#endif
|
||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||
#define NEOPIXEL_PIN PC12
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if IS_ULTIPANEL
|
||||
#define LCD_PINS_D5 PC12
|
||||
#define LCD_PINS_D6 PD0
|
||||
#define LCD_PINS_D7 PD1
|
||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HAS_WIRED_LCD
|
||||
|
||||
// Alter timing for graphical display
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
#ifndef BOARD_ST7920_DELAY_1
|
||||
#define BOARD_ST7920_DELAY_1 DELAY_NS(96)
|
||||
#endif
|
||||
#ifndef BOARD_ST7920_DELAY_2
|
||||
#define BOARD_ST7920_DELAY_2 DELAY_NS(48)
|
||||
#endif
|
||||
#ifndef BOARD_ST7920_DELAY_3
|
||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(640)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN PB6
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN PB5
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN PB7
|
||||
#endif
|
||||
#ifndef RGB_LED_W_PIN
|
||||
#define RGB_LED_W_PIN -1
|
||||
#endif
|
||||
Reference in New Issue
Block a user